2 layers287.8 × 126.7 mm
Boards using the DRV2605LDGS
98 boardsBoards in 71 GitHub repositories, designed in KiCad, that use the DRV2605LDGS by Texas Instruments (-40℃~+85℃ 1 2V~5.2V 500uA I2C Yes VSSOP-10-0.5mm Brushed DC Motor Drivers ROHS). See how each wires it, with its parts, size, README and files; the DRV2605LDGS’s symbol, footprint and pinout are on its own page.
- 6 layers50.2 × 77.2 mm
Meko
KOEGlike/meko
A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad
274 parts90GPL-3.0 - 2 layers71.1 × 24.1 mm
Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57 - 4 layers82.8 × 33 mm
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
162 parts22 - 2 layers55.6 × 71.2 mm
- 4 layers72 × 75 mm
Nrf52480 Dev board
brendena/Nordic_Pebble_Steel
The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.
75 parts9 - 4 layers56 × 48 mm
- 4 layers25 × 50 mm
Print and Place PCB
ollyoid/Printegrated-Circuits
GCode post-processor for integrating PCBs into 3D prints
49 parts5 - 4 layers100 × 100 mm
Solar panel side Z
proveskit/solar_boards
The solar panel boards for the PROVES Kit
45 parts4CERN-OHL-W-2.0 - 2 layers47.9 × 28.5 mm
Posture tracker v2
kiranj26/Posture-Tracker-Using-ESP32
Posture Correction using ESP32-MINI-1 and MU sensor (GY-521 / MPU-6050)
52 parts3MIT - 4 layers76.9 × 67.3 mm
- 6 layers320.8 × 128.3 mm
- 2 layers
Hivemind
agenticaiuw/hivemind
Unified monorepo for the Agentic Gadget hardware, firmware, local agent, cloud relay, and Bluetooth audio bridge.
29 parts1 - 2 layers96 × 74 mm
MacroController
alex1klimovich/nrf52840-macro-controller
Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.
78 parts1 - 6 layers41.8 × 42 mm
- 2 layers145.2 × 98.4 mm
- 4 layers116 × 106 mm
Card
increpare/PuzzleScript-labs
firehose of mostly ai-written puzzlescript projects. main project is https://github.com/increpare/puzzlescript/
48 parts1MIT - 2 layers143.9 × 88.6 mm
Esd pcb design
k1thhh/CIPN
An edge-AI system for early detection of Chemotherapy-Induced Peripheral Neuropathy (CIPN). Integrates vibration, thermal, and GSR sensing with ESP32-based on-device inference for real-time, low-cost neuropathy…
18 parts1 - 4 layers62 × 45.9 mm
Dcs
MixedSignalDevelopment/K2601-Doomsday-Comms-System
Editable source design for the Doomsday Comms System (D.C.S., SKU OS2601), board rev B.
50 parts1MIT - 2 layers426.3 × 163 mm
- 4 layers141.6 × 116.1 mm
Flat sat dev board
proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.
371 parts1 - 2 layers33.8 × 17.9 mm
Licenta
radupascale/smartwatch-licenta
This repository contains all the files necessary to build the smartwatch I developed for my thesis at the Computer Science Faculty of UPB.
66 parts1 - 4 layers92.1 × 56.7 mm
- 4 layers70 × 52 mm
Pager carrier rev a
vyquocvu/analog-ai-chip
This directory contains the editable KiCad 10 source for the 70 mm × 52 mm, four-layer Pager-1 main carrier. The display, keypad, protected Li-Po pack, and analog accelerator are external assemblies.
32 parts1MIT