Skip to the content

Boards using the TPD2E2U06DRLR-TP

15 boards

Boards in 8 GitHub repositories, designed in KiCad, that use the TPD2E2U06DRLR-TP by TECH PUBLIC (0.4pF 10.5V 100nA 5V 84W@8/20us 8A@8/20us 9.5V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-553 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the TPD2E2U06DRLR-TP’s symbol, footprint and pinout are on its own page.

  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 2 layers109.5 × 51 mmCANBOB (MAGE CANBOB-003), the printed circuit board in 3D

    CANBOB (MAGE CANBOB-003)

    Mage-Control-Systems-Ltd/CANBOB

    A breakout board that enables USB or SPI to CAN communication using the MCP2515.

    98 parts8CC-BY-4.0
  • 4 layers50 × 70 mmStm32-portable data logger, the printed circuit board in 3D

    Stm32-portable data logger

    copperheadhq/copperhead-stm32-data-logger

    Portable STM32L433 data logger, 50 × 70 mm, four layers, microSD, USB-C LiPo charging. Designed with copperhead. Never built: do not order expecting it to work.

    90 parts3
  • 4 layers220 × 120 mmCandidate filled profile, the printed circuit board in 3D

    Candidate filled profile

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    569 parts3MIT
  • 4 layers150 × 30 mmSingle sh proto, the printed circuit board in 3D

    Single sh proto

    andrewsharmon/rp2350-stepper-controller

    Low-cost 10-axis sine-microstepping controller for small steppers on the RP2350 (PIO + DMA). WIP.

    163 partsMIT
  • 2 layers240 × 1,056 mmMSAP-2 rev.A, the printed circuit board in 3D

    MSAP-2 rev.A

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 4 layers156 × 100 mmCrow audio carrier v1, the printed circuit board in 3D

    Crow audio carrier v1

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    340 parts3MIT
  • 2 layers94.5 × 44.5 mmCrow mic pod, the printed circuit board in 3D

    Crow mic pod

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    40 parts3MIT
  • 2 layers60 × 40 mmObserved board, the printed circuit board in 3D

    Observed board

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    44 parts3MIT
  • 4 layers30 × 30 mmController, the printed circuit board in 3D

    Controller

    andrewsharmon/rp2350-stepper-controller

    Low-cost 10-axis sine-microstepping controller for small steppers on the RP2350 (PIO + DMA). WIP.

    63 partsMIT
  • 4 layers122 × 20 mmSingle sh, the printed circuit board in 3D

    Single sh

    andrewsharmon/rp2350-stepper-controller

    Low-cost 10-axis sine-microstepping controller for small steppers on the RP2350 (PIO + DMA). WIP.

    151 partsMIT