2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44
Boards using the LMV358
112 boardsBoards in 97 GitHub repositories, designed in KiCad, that use the LMV358 by TECH PUBLIC (-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHS). See how each wires it, with its parts, size, README and files; the LMV358’s symbol, footprint and pinout are on its own page.
- 4 layers48.5 × 33.5 mm
- 4 layers100 × 20 mm
- 4 layers89 × 60.5 mm
- 2 layers64.8 × 62 mm
- 2 layers41.5 × 35.5 mm
OpenEstim++
humancomputerintegration/BOH-Electro-Tactile
This is the repository for PCB schematics and Arduino codes used for the "Full-Hand Electro Tactile Feedback without Obstructing Palmar Side of Hand" paper (ACM CHI2023).
28 parts13 - 2 layers68.6 × 53.3 mm
- 4 layers206.7 × 105.8 mm
32-channel current source
M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer
324 parts11GPL-3.0 - 4 layers95.9 × 90.2 mm
SFUSat Radio
SFUSatClub/CubeSat-Radio
Cubesat comms module designed for the Canadian Satellite Design Challenge
281 parts9 - 2 layers166 × 70 mm
Prototype
SteveCooling/MidiKeys
Will be a complete board with decoders for multiplexed sampling of analog sources and up to 61-key keybeds
75 parts8MIT - 4 layers
- 2 layers158 × 34 mm
- 2 layers99.1 × 99.1 mm
Vent
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve
113 parts5 - 2 layers68.6 × 53.3 mm
INK-128DA28
TheEccentricGenius/INK4u_Board
An UNO form factor board with a AVR128DA28 processor.
59 parts5CERN-OHL-W-2.0 - 2 layers101.5 × 53.3 mm
- 2 layers99.5 × 99.5 mm
Balancer
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
173 parts3MIT - 2 layers68.6 × 53.3 mm
- 2 layers34.3 × 26.7 mm
- 2 layers110.7 × 67.8 mm
Cyberdeck
awesomebrownies/cyberdeck
Deck Featuring: Controllers, shock cage, folding travel mode, and picatinny rails
38 parts2 - 4 layers100 × 100 mm
AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 4 layers138.4 × 138.3 mm
GRBL board
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
287 parts2GPL-3.0 - 2 layers68.5 × 53.3 mm
- 4 layers85 × 56 mm
Amr stm32 kicad
hongtannnn/amr_stm32
AMR Hardware & PCB Design: Low-level controller board and hardware system (STM32 / KiCad) engineered as the foundation for future ROS 2, SLAM, and autonomous navigation integration.
96 parts2 - 4 layers44 × 34 mm
