4 layers120 × 113 mm
Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
360 parts1.1kGPL-3.0
Boards using the BAT43
122 boardsBoards in 86 GitHub repositories, designed in KiCad, that use the BAT43 by STMicroelectronics (-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the BAT43’s symbol, footprint and pinout are on its own page.
- 2 layers30 × 100 mm
- 2 layers100 × 100 mm
- 2 layers54 × 64 mm
DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers19.7 × 99.1 mm
Main pcb
Testbild-synth/HAGIWO_arduino_oscillator
4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.
40 parts57MIT - 2 layers29 × 99.8 mm
Main pcb
Testbild-synth/Hagiwo_009_030_sequencer
A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.
26 parts49MIT - 2 layers63 × 46 mm
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT - 2 layers29 × 99 mm
Control pcb v1 1
Testbild-synth/HAGIWO-029-033-Eurorack-quantizer
Through hole PCB version of the HAGIWO Dual Quantizer/SH101 Sequencer Eurorack Module-.
30 parts40MIT - 2 layers28 × 99 mm
Main pcb v1 1
Testbild-synth/HAGIWO-005-Eurorack-sequencer
Through hole PCB version of the HAGIWO 005 Generative Sequencer Eurorack module.
25 parts33 - 4 layers95 × 95 mm
TelemetryOnboard
Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
143 parts27CERN-OHL-S-2.0 - 2 layers88.6 × 50.6 mm
- 2 layers90.2 × 109.9 mm
Circuit pcb smd dac
Testbild-synth/super-sweet-16
Deluxe 16-step knob-per-function sequencer Module for eurorack
163 parts12MIT - 2 layers80 × 128.5 mm
RP2040-VCO
BleepSound/rp2040-chord-vco
Latest documentation available at https://bleepsound.github.io/modules/ VCO clone, originally made by HAGIWO (link in japanese)
58 parts9CC-BY-SA-4.0 - 2 layers120.6 × 29 mm
PillPCB
andreq/iSpindel-Gravitymon-Pill-PCB
A PCB used to build an iSpindel or GravityMon hydrometer that fit into a *popular brand* Pill casing instead of a PETling container
13 parts8GPL-3.0 - 2 layers100 × 63.5 mm
ESE2RAM Cartridge
goriponsoft/ESE2RAM-Cartridge
Implementation of ESE-RAM using only general-purpose logic ICs (naming: ESE-ESE-RAM/ESE2-RAM).
29 parts8 - 2 layers108 × 122 mm
Myolo
nico-entz/MyoloV2
A simple muon/particle detector based on STM32 (BluePill), Scintillators and MicroFC SiPMS
67 parts8MIT - 2 layers99.9 × 64 mm
MSX FPGA Hat
costarc/MSX_FPGA_Hat
A Cartridge interface that converts MSX 5v signal levels to 3v, exposing an IDC connector for external devices that operates at 3v level.
44 parts7MIT - 2 layers30 × 100 mm
- 2 layers204.5 × 121.9 mm
- 2 layers72 × 47.5 mm
PCB avr dx unbricker
k-takata/PCB_avr_dx_unbricker
UPDI High Voltage programmer for AVR Dx/Ex series
40 parts4 - 2 layers97.8 × 97.8 mm
PMod ADDAC
mohanjan/Fagprojekt2022_Grp9
To deploy a docker container using the image do the following: Firstly build the image via the dockerfile calling it chisel3dev using the command below To insure the build please check that it is there when the images…
86 parts4Unlicense - 2 layers56 × 91 mm
Burstcart via
ytmytm/plus4-burstcart
Burst (fast serial) capable cartridge for Commodore C16/116/Plus4
24 parts4 - 2 layers106 × 128.5 mm
EuroClockMD TwoBoards
fablabnk/HagiwoClockMultiDivide
This is an attempt to make a PCB version of Hagiwo's Clock Multi Divide module.
49 parts3 - 2 layers100 × 80 mm
