Skip to the content

Boards using the BOB-12009

54 boards

Boards in 42 GitHub repositories, designed in KiCad, that use the BOB-12009 by SparkFun Electronics. See how each wires it, with its parts, size, README and files; the BOB-12009’s symbol, footprint and pinout are on its own page.

  • 2 layers85.6 × 26 mmGame boy pico link board, the printed circuit board in 3D

    Game boy pico link board

    agtbaskara/game-boy-pico-link-board

    An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico

    6 parts51MIT
  • 2 layers70 × 90 mmShawazu gb dumper, the printed circuit board in 3D

    Shawazu gb dumper

    tihmstar/shawazu-gb-dumper-hardware

    Shawazu GB Dumper hardware

    17 parts14
  • 2 layers76.7 × 35.1 mmWeather station, the printed circuit board in 3D

    Weather station

    VincentKobz/diy-weather-station

    The goal is to build from scratch a small intelligent weather station that can be connected to IOT networks.

    14 parts2MIT
  • 2 layers39.5 × 30.5 mmVC Adapter, the printed circuit board in 3D

    VC Adapter

    Gr3nSkyDragon/VC-Adapter

    Firmware and PCB for GB to 3DS communication

    10 parts1GPL-3.0
  • 2 layers60 × 30 mmGPIO circuit, the printed circuit board in 3D

    GPIO circuit

    JhouLab/Pi5WebcamRecorder

    Records MV4 AVI video files from up to 4 simultaneous USB webcams on Raspberry Pi 5

    7 parts1
  • 16 layers566.8 × 155.3 mmTotal, the printed circuit board in 3D

    Total

    michelkeijzers/fraxis

    This project's personal goal is to learn more about ESP32 with ESP-IDF programming.

    106 parts1MIT
  • 2 layers87.2 × 93.9 mmWRO RevA, the printed circuit board in 3D

    WRO RevA

    Nakashima26/WRO_FE_2026_FoxRobotics

    CETYS Mexicali WRO2026 FoxRobotics Team

    26 parts1MIT
  • 2 layers273.9 × 208.8 mmPlaca todo en uno, the printed circuit board in 3D

    Placa todo en uno

    NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ

    Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).

    50 parts1
  • 2 layers57 × 54 mmMb adv 1.0, the printed circuit board in 3D

    Mb adv 1.0

    aestellic/mb-adv

    GBA Multiboot Dongle

    10 partsMIT
  • 2 layers131 × 125 mmIndustry temperature control, the printed circuit board in 3D

    Industry temperature control

    IaMdEvJaXoN/industry_temperature_control_system

    This project entails Dallas Temperature sensors sending data to the ESP32 which then determines the PWM output to the actuators after the PID engine runs.The ESP32 also sends telemetry to Firebase RTDB which then sends…

    32 parts
  • 2 layers100 × 100 mmMicro, the printed circuit board in 3D

    Micro

    IbrahimMohsenMoussa/blackpill_STM32F411CE

    57 parts
  • 4 layersPitot Breakout V1.1, the printed circuit board in 3D

    Pitot Breakout V1.1

    IlyaasAitSimmou/guepard_one_pcb

    This is a repository containing all KiCad files relating to the GUEPARD I pitot tube board, developed for Turner Fenton Rocketry's 2026 Launch Canada rocket, GOLDENEYE.

    26 parts
  • 2 layers220 × 125 mmControllerPCB, the printed circuit board in 3D

    ControllerPCB

    jbayert/ControllerPCB

    26 parts
  • 2 layers83.7 × 90.3 mmIncubator Quetta Client, the printed circuit board in 3D

    Incubator Quetta Client

    manhoosbilli1/Incubator_basic_esp32_modular_1_sided

    This contains an incubator pcb i've made for a client. his needs were specific so only added what he needed. a complete and complex version can be found in capibator organization.

    43 parts
  • 2 layers54 × 38 mmPwmPump, the printed circuit board in 3D

    PwmPump

    mAPBhlJ/PwmPump

    Control modern (Grundfoss) heating water pumps via PWM

    9 partsAGPL-3.0
  • 2 layers85.5 × 92.4 mmActuator board, the printed circuit board in 3D

    Actuator board

    nawalhussein/Actuation-Node-PCB-for-Autonomous-Car-using-KiCad

    This project contains the complete hardware design (schematics and PCB layout) and associated software for a custom-built STM32-based actuator control system to be put in the autonomous car.

    36 parts
  • 2 layers76.8 × 74.9 mmWled driver nodemcu v2, the printed circuit board in 3D

    Wled driver nodemcu v2

    nicoandra/iot-devices

    IOT schematics, PCBs and Yamls

    16 partsGPL-3.0
  • 2 layers88.2 × 103.1 mmGaragensteuerung uap1, the printed circuit board in 3D

    Garagensteuerung uap1

    NiklasM-foss/garagensteuerung-uap1

    Steuerplatine + ESPHome-Firmware, um ein Hoermann-Garagentor ueber die UAP1 in Home Assistant zu steuern und zu ueberwachen (ESP32-C6)

    34 parts
  • 2 layers74.5 × 79.4 mmPihat, the printed circuit board in 3D

    Pihat

    Noxctis/kicad_pihat

    22 parts