
Game boy pico link board
agtbaskara/game-boy-pico-link-board
An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico

Raspberrypi led hat-2 is an open-source printed circuit board by davisschenk, from the davisschenk/rasp_leds repository on GitHub. It is a 2-layer board of 65 × 56 mm with 10 parts on 40 nets, routed with 27 tracks and 0 vias.
It is built around the BOB-12009 and M2.5. Its parts include 3 connectors, 1 resistor, 1 IC and 1 switch.
This project was meant as a way for me to learn a little bit about electroics and pcb design, aswell as to be an outlet to learn rust and mess around with building a frontend for a larger project. This is very much still a WIP and I will be continuing to work on this project in my sparetime. I will do my best to document how things work and do small writeups explaining the project, if you are interested I highly encourage looking through the repository because I have readme's for each main section of this project (backend, frontend, hardware). Eventually I may document setup if anyone else is intrested in replicating this, but for now im still working on improving pretty much everything.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 1 | BOB-12009 | BOB-120009 Level Converter:CONV_BOB-12009 | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Conn_02x02_Counter_Clockwise | footprints:430450400 | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |

agtbaskara/game-boy-pico-link-board
An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico


VincentKobz/diy-weather-station
The goal is to build from scratch a small intelligent weather station that can be connected to IOT networks.


hselomein/Car-LED-Controller
This is a private repo for my car led project

JhouLab/Pi5WebcamRecorder
Records MV4 AVI video files from up to 4 simultaneous USB webcams on Raspberry Pi 5

michelkeijzers/fraxis
This project's personal goal is to learn more about ESP32 with ESP-IDF programming.

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the BOB-12009 and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davisschenk/rasp_leds repository on GitHub, at the commit this page was made from: the board is hardware/raspberrypi-led-hat/raspberrypi-led-hat-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask davisschenk before reusing the design.