Skip to the content

Boards using the RH-5019

13 boards

Boards in 5 GitHub repositories, designed in KiCad, that use the RH-5019 by ronghe (3.8mmx2.03mm Ferrite Ring (SMD) Non-Plastic - Test Points / Test Rings ROHS). See how each wires it, with its parts, size, README and files; the RH-5019’s symbol, footprint and pinout are on its own page.

  • 6 layers110.9 × 93 mmESP32-Rotator v0.2, the printed circuit board in 3D

    ESP32-Rotator v0.2

    brokebit/Rotator-ESP32-S3-Board

    Rotator Controller based on an ESP32-S3 micro and Clearpath Servos

    89 parts
  • 4 layers100 × 100 mmPhmod, the printed circuit board in 3D

    Phmod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    234 parts
  • 2 layers170 × 120 mmMotor pid, the printed circuit board in 3D

    Motor pid

    gallicchio/motor-pid

    The motor-position feedback loop of Learning the Art of Electronics (Hayes & Horowitz), Lab 10L, as a 170 x 120 mm printed circuit board whose silkscreen is the schematic.

    110 parts
  • 2 layers100 × 100 mmOpamp, the printed circuit board in 3D

    Opamp

    gallicchio/op-amp-pcb

    The op-amp of Learning the Art of Electronics (Hayes and Horowitz, 2016), Lab 5L, built from six 2N3904 / 2N3906 transistors on a 100 x 100 mm board whose silkscreen is the schematic.

    65 parts
  • 4 layers100 × 100 mmDIY AWG V1.1, the printed circuit board in 3D

    DIY AWG V1.1

    Xpeditor15/DIY_AWG_V1.0

    235 parts
  • 4 layers100 × 100 mmAmod a, the printed circuit board in 3D

    Amod a

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    188 parts
  • 4 layers100 × 100 mmAmod b, the printed circuit board in 3D

    Amod b

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    147 parts
  • 4 layers100 × 100 mmAmod c, the printed circuit board in 3D

    Amod c

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    211 parts
  • 4 layers100 × 100 mmAmod m, the printed circuit board in 3D

    Amod m

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    207 parts
  • 4 layers100 × 100 mmAmod n, the printed circuit board in 3D

    Amod n

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    88 parts
  • 2 layers100 × 100 mmAmod p, the printed circuit board in 3D

    Amod p

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    151 parts
  • 4 layers100 × 100 mmIq mod, the printed circuit board in 3D

    Iq mod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    186 parts
  • 4 layers100 × 100 mmRf mod, the printed circuit board in 3D

    Rf mod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    168 parts