

ESP32-Rotator v0.2
Rotator Controller based on an ESP32-S3 micro and Clearpath Servos
- Size
- 110.9 × 93 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 86
- Pads
- 304
- Tracks, vias
- 451, 117
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Feb 2026
- Updated
- 11 Feb 2026
Overview
ESP32-Rotator v0.2 is an open-source printed circuit board by brokebit, from the brokebit/Rotator-ESP32-S3-Board repository on GitHub. It is a 6-layer board of 110.9 × 93 mm with 89 parts on 86 nets, routed with 451 tracks and 117 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, TPS5430DDAR and KF2EDGV-3.81-2P, with the MMBT3904, RH-5019 and B340A among its other parts. Its parts include 27 resistors, 21 connectors, 17 capacitors, 6 transistors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS5430DDAR
SOIC-8-EP-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersKF2EDGV-3.81-2P
插件,P=3.81mm-40℃~+105℃ 1 1x2P 2 2P 3.81mm 300V 8A Board Side/Socket - Closed Green Through Hole Without fixing device Plugin,P=3.81mm Pluggable System Terminal Block ROHSCixi Kefa ElecPluggable System Terminal BlockMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)RH-5019
-3.8mmx2.03mm Ferrite Ring (SMD) Non-Plastic - Test Points / Test Rings ROHSronghePogo Pin Spring Probe ConnectorB340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdRotator-ESP32-S3-Board

Features / Design Info
- One of the ESP32 serial ports exposes a GS-232 interface for motor control commands for connecting to a PC interfacing with rotctld from the Hamlib suite
- GPS Time Sync using NEMA GPS Module over RS232
- Serial interface for Nextion Display
- Designed for Clearpath servo motors from https://teknic.com/
- Interface for 6 Hardware Debounced buttons for manual direction control, homing and moon tracking
- Uses pulse encoder data from the Clearpath motors for position feedback
- Power input is +10v - +25v DC
- Motors are powered by seperate power source
- Voltage select headers to select either 3.3v or 5v logic for RS232 interfaces (GPS, LCD)
- 6 Layer Board
Build Pics

Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 +2 |
| 10 | .1uf | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C11, C12 |
| 9 | KF2EDGV-3.81-2P | 1x2-Connector-C441332:CONN-TH_2P-P3.81_KF2EDGV-3.81-2P | CN5, CN6-CW1, CN7-CCW1, CN8-UP1, CN9-DOWN1, CN10-HOME1, CN11-MOON1, CN12-RST1, CN13-PWR2 |
| 6 | 4.7k | Resistor_SMD:R_0805_2012Metric | R38, R39, R40, R41, R42, R43 |
| 6 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q9, Q10, Q11, Q12, Q13, Q14 |
| 5 | 10uf | Capacitor_SMD:C_0603_1608Metric | C13, C14, C15, C19, C20 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | WJ15EDGVC-3.81-4P | 1x4-Connector-C8410:CONN-TH_4P-P3.81_WJ2EDGVC-3.81-4P | CN3-I2C1, CN4-LCD1, CN5-GPS1 |
| 2 | 74HC14D,653 | 74HC14D-C5605:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U2, U3 |
| 2 | Conn_01x22_Socket | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J3, J4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | RH-5019 | C5199800-TestPoint:TESTPOINT-SMD_L3.8-W2.0_RH-5019 | CN8-SCL1, CN9-SDA1 |
| 2 | WJ15EDGVC-6P | 1x6-Connector-C8415:CONN-TH_6P_WJ15EDGVC-3.81-6P | P1, P2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 15uH | C40000-Inductor-15uH:IND-SMD_L12.5-W12.5_RLF12545T | L1 |
| 1 | 3.24k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 330uF | C79112-330uF-Cap:CAP-SMD_L7.3-W4.3-R-RD | C16 |
| 1 | 40 | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | AMS1117-3.3_C347222 | C347222-AMS1117:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | U6 |
| 1 | B340A | C64982-B340A:SMA_L4.3-W2.6-LS5.1-RD | D1 |
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKit:ESP32-S3-DevKitC | U1 |
| 1 | GPS_PWR_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LCD_PWR_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | TPS5430DDAR | C9864-TPS5430DDAR:ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U5 |
| 1 | WJ15EDGVC-3.81-5P | 1x5-Connector-C8391:CONN-TH_WJ15EDGVC-3.81-5P | CN1-IO1 |
Similar boards
- 6 layers152.4 × 94 mm

- 4 layers100 × 100 mm

Phmod
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
234 parts - 2 layers100 × 100 mm

Opamp
gallicchio/op-amp-pcb
The op-amp of Learning the Art of Electronics (Hayes and Horowitz, 2016), Lab 5L, built from six 2N3904 / 2N3906 transistors on a 100 x 100 mm board whose silkscreen is the schematic.
65 parts - 2 layers170 × 120 mm

Motor pid
gallicchio/motor-pid
The motor-position feedback loop of Learning the Art of Electronics (Hayes & Horowitz), Lab 10L, as a 170 x 120 mm printed circuit board whose silkscreen is the schematic.
110 parts - 4 layers100 × 100 mm

- 2 layers59 × 88.5 mm

KHNATH002 Power System
Athenkosi-Khonzani/MEERKAT_Underwater_Ice_Detection_And_Avoidance-System
MEERKAT is a small, low-cost Autonomous Underwater Vehicle (AUV) designed to detect and avoid sub-surface ice (frazil ice, brash ice, and submerged keels of icebergs) in turbid polar waters.
45 parts - 6 layers90 × 90 mm

SolarDataLogger
brokebit/SolarDataLogger
Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.
70 partsCC0-1.0 - 2 layers50 × 36 mm

Charger buck
luffffyz/TextEDA
Agent first, human reviewable. Describe schematics and PCBs as text: typed IR, validators, KiCad export, and a reference renderer.
9 partsApache-2.0
Questions
How big is the ESP32-Rotator v0.2 PCB?
It measures 110.9 × 93 mm and has 6 copper layers, 1.6 mm thick.
What parts does the ESP32-Rotator v0.2 use?
89 parts, built around the ESP32-S3-DEVKITC-1-N8, TPS5430DDAR, KF2EDGV-3.81-2P and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-Rotator v0.2 KiCad files?
From the brokebit/Rotator-ESP32-S3-Board repository on GitHub, at the commit this page was made from: the board is ESP32-Rotator-v0.2.kicad_pcb and its schematic Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-Rotator v0.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask brokebit before reusing the design.