Skip to the content

Boards using the NUP2202W1

11 boards

Boards in 10 GitHub repositories, designed in KiCad, that use the NUP2202W1 by onsemi (-40℃~+125℃ 1.5pF、3pF、3pF、5pF 20V 500W 5V 5uA 6V 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the NUP2202W1’s symbol, footprint and pinout are on its own page.

  • 2 layers38 × 20.7 mmJTAG HW, the printed circuit board in 3D

    JTAG HW

    vanbwodonk/ft2232hl-jtag-clone

    Digilent JTAG clone hardware + eeprom firmware (.bin)

    38 parts73
  • 4 layers58 × 38 mmQspimux2-prog, the printed circuit board in 3D

    Qspimux2-prog

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    99 parts57CC-BY-SA-4.0
  • 2 layers26 × 21.7 mmOpenThermalCamera, the printed circuit board in 3D

    OpenThermalCamera

    openthermalcamera/HW-PCB

    PCB for Open Thermal Camera

    23 parts39GPL-3.0
  • 4 layers22.9 × 50.8 mmPenguino STM32WL M, the printed circuit board in 3D

    Penguino STM32WL M

    azerimaker/Penguino-STM32WL-MAMWLExx

    This repo contains all the necessary design and fabrication files for the MoveSolution's MAMWLExx based Penguino STM32WL breakout board.

    68 parts15
  • 4 layers22.9 × 50.8 mmPenguino Feather-4260-v1, the printed circuit board in 3D

    Penguino Feather-4260-v1

    azerimaker/Penguino-RAK4260

    This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.

    60 parts8
  • 2 layers50 × 50 mmBmp x6, the printed circuit board in 3D

    Bmp x6

    enisaslan/bmp_x6

    Black Magic Probe x6

    67 parts1
  • 2 layers65 × 30 mmCreate rpi hat, the printed circuit board in 3D

    Create rpi hat

    OYTIS/Create2Pi

    Raspberry Pi HAT for interfacing with iRobot Create Open Interface

    29 parts1
  • 4 layers180 × 160 mmPCE colorlight carrier, the printed circuit board in 3D

    PCE colorlight carrier

    supermomo31/PCE_colorlight_carrier

    console PCE depuis un FPGA format SODIMM : colorlight i5

    258 parts
  • 2 layers22.9 × 50.8 mmTLM breakout v1 1, the printed circuit board in 3D

    TLM breakout v1 1

    azerimaker/Penguino-SAMR34

    This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.

    45 parts61
  • 2 layers22.9 × 50.8 mmTLM breakout v1 2, the printed circuit board in 3D

    TLM breakout v1 2

    azerimaker/Penguino-SAMR34

    This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.

    42 parts61
  • 2 layers45.3 × 37.1 mmProgrammer, the printed circuit board in 3D

    Programmer

    AriB2003/aero

    Olin Aero

    43 parts1