Skip to the content
123456

NUP2202W1

onsemiExtended

-40℃~+125℃ 1.5pF、3pF、3pF、5pF 20V 500W 5V 5uA 6V 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHS

Part id
onsemi/NUP2202W1
Category
ESD And Surge Protection (TVS, ESD)
Package
SC-88
Pins
6
In stock
2,542 at JLCPCB (C89322)
Used on
11 open-source boards

Overview

The NUP2202W1 is an ESD And Surge Protection made by onsemi in a SC-88 package with 6 pins. -40℃~+125℃ 1.5pF、3pF、3pF、5pF 20V 500W 5V 5uA 6V 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Power_Protection:NUP2202, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 2,542 are in stock at JLCPCB (part C89322). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1256
Power_Protection:NUP2202From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

Pinout

6
The pins of the NUP2202W1
PinNameType
1—Passive
2—Passive
3—Not connected
4—Not connected
5—Passive
6—Passive

Open-source boards using it

11See all 11
  • 2 layers38 × 20.7 mmJTAG HW, the printed circuit board in 3D

    JTAG HW

    vanbwodonk/ft2232hl-jtag-clone

    Digilent JTAG clone hardware + eeprom firmware (.bin)

    38 parts73
  • 4 layers58 × 38 mmQspimux2-prog, the printed circuit board in 3D

    Qspimux2-prog

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    99 parts57CC-BY-SA-4.0
  • 2 layers26 × 21.7 mmOpenThermalCamera, the printed circuit board in 3D

    OpenThermalCamera

    openthermalcamera/HW-PCB

    PCB for Open Thermal Camera

    23 parts39GPL-3.0
  • 4 layers22.9 × 50.8 mmPenguino STM32WL M, the printed circuit board in 3D

    Penguino STM32WL M

    azerimaker/Penguino-STM32WL-MAMWLExx

    This repo contains all the necessary design and fabrication files for the MoveSolution's MAMWLExx based Penguino STM32WL breakout board.

    68 parts15
  • 4 layers22.9 × 50.8 mmPenguino Feather-4260-v1, the printed circuit board in 3D

    Penguino Feather-4260-v1

    azerimaker/Penguino-RAK4260

    This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.

    60 parts8
  • 2 layers50 × 50 mmBmp x6, the printed circuit board in 3D

    Bmp x6

    enisaslan/bmp_x6

    Black Magic Probe x6

    67 parts1
  • 2 layers65 × 30 mmCreate rpi hat, the printed circuit board in 3D

    Create rpi hat

    OYTIS/Create2Pi

    Raspberry Pi HAT for interfacing with iRobot Create Open Interface

    29 parts1
  • 4 layers180 × 160 mmPCE colorlight carrier, the printed circuit board in 3D

    PCE colorlight carrier

    supermomo31/PCE_colorlight_carrier

    console PCE depuis un FPGA format SODIMM : colorlight i5

    258 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NUP2202W1?

Yes. The symbol is Power_Protection:NUP2202 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NUP2202W1?

SC-88, with 6 pins. Its footprint is drawn on this page.

Where is the NUP2202W1 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NUP2202W1?

JLCPCB lists it as part C89322, with 2,542 in stock; the sellers' links on this page open their listings.

What can replace the NUP2202W1?

Parts like it in the library: the SMF05C by onsemi, the SMF05CT1G-ES by ElecSuper, the SMF05C by TECH PUBLIC and the PRTR5V0U4Y-N by BORN. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NUP2202W1?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.