
JTAG HW
vanbwodonk/ft2232hl-jtag-clone
Digilent JTAG clone hardware + eeprom firmware (.bin)

Black Magic Probe x6
Bmp x6 is an open-source printed circuit board by enisaslan, from the enisaslan/bmp_x6 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 67 parts on 64 nets, routed with 775 tracks and 158 vias.
It is built around the SN74LVC2T45DCURE4, AMS1117-3.3 and NUP2202W1. Its parts include 24 resistors, 21 capacitors, 7 ICs, 4 diodes and 4 transistors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C7, C10, C11, C12, C13, C15, C18, C19, C20, C21 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R4, R7, R10, R19, R21, R24 |
| 5 | 22R | Resistor_SMD:R_0603_1608Metric | R5, R6, R20, R22, R23 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R18 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R15, R16, R17 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 4 | SN74LVC2T45DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U4, U5, U6, U7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C6, C9 |
| 3 | 47nF | Capacitor_SMD:C_0603_1608Metric | C5, C8, C14 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | FB | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q4 |
| 2 | PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q2, Q3 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 8Mhz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J3 |
| 1 | NUP2202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U8 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |

vanbwodonk/ft2232hl-jtag-clone
Digilent JTAG clone hardware + eeprom firmware (.bin)


felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests


azerimaker/Penguino-STM32WL-MAMWLExx
This repo contains all the necessary design and fabrication files for the MoveSolution's MAMWLExx based Penguino STM32WL breakout board.

azerimaker/Penguino-RAK4260
This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.

OYTIS/Create2Pi
Raspberry Pi HAT for interfacing with iRobot Create Open Interface

supermomo31/PCE_colorlight_carrier
console PCE depuis un FPGA format SODIMM : colorlight i5
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the SN74LVC2T45DCURE4, AMS1117-3.3 and NUP2202W1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the enisaslan/bmp_x6 repository on GitHub, at the commit this page was made from: the board is bmp_x6.kicad_pcb and its schematic bmp_x6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask enisaslan before reusing the design.