Skip to the content

Boards using the 1N4742A

22 boards

Boards in 17 GitHub repositories, designed in KiCad, that use the 1N4742A by onsemi (-65℃~+200℃ 1 Independent 11.4V~12.6V 12V 1W 5uA@9.1V 700Ω 9Ω DO-41 Zener Diodes ROHS). See how each wires it, with its parts, size, README and files; the 1N4742A’s symbol, footprint and pinout are on its own page.

  • 2 layers213 × 130 mmMax48 ISSUE4, the printed circuit board in 3D

    Max48 ISSUE4

    alvaroalea/all-spectrum-clones

    Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

    186 parts10
  • 2 layers147 × 76 mmA1200-psu, the printed circuit board in 3D

    A1200-psu

    nbolton/amiga

    My personal open source Amiga works (A1200 PSU schematic, etc)

    64 parts10
  • 2 layers300 × 90 mmPreamp, the printed circuit board in 3D

    Preamp

    profdc9/PrettyGoodPreamplifier

    A Pretty Good Preamplifier for Stereo and Subwoofer Use

    222 parts10
  • 2 layers68.2 × 73 mmLangmuirProbePCB v2 opa454, the printed circuit board in 3D

    LangmuirProbePCB v2 opa454

    meldddiiiii/aspen-langmuir-pcb

    KiCad redesign of the USC ASPEN single Langmuir probe sweep board, for the Fall 2026 ASPEN PCB competition.

    31 parts1
  • 4 layers128 × 72.5 mmFlyback Driver V1, the printed circuit board in 3D

    Flyback Driver V1

    Operationorange01/Flyback-Driver

    driver for high voltage flyback transformer

    120 parts1
  • 4 layers165 × 80 mmThermostat, the printed circuit board in 3D

    Thermostat

    bquangDinh/diy-esp32-thermostat

    Design custom thermostat with ESP32, using 24VAC, battery management for backup, USB, etc

    143 parts
  • 2 layers281.6 × 255.2 mmSynthia, the printed circuit board in 3D

    Synthia

    Engineering-House/Project-Synthia

    The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)

    236 parts
  • 2 layers78 × 42.4 mmAnti tartre, the printed circuit board in 3D

    Anti tartre

    FredM67/Misc-Projects

    Some projects around PIC-microcontrollers

    38 partsCC-BY-4.0
  • 4 layers200 × 130 mmHVAC STM32F7 PCB, the printed circuit board in 3D

    HVAC STM32F7 PCB

    Jopolle/INZYNIERKA

    W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu

    110 parts
  • 2 layers213.5 × 130.5 mmZX Spider-48, the printed circuit board in 3D

    ZX Spider-48

    liveboxandy/ZX-Spider-48

    ZX Spider 48K by 'Skoti' https://github.com/konkotgit/ZX-48-Spider recreated in Kicad 10 to get a full ibom including tracks and vias. The gerbers in the Gerbers folder are those from Skoti.

    150 parts
  • 2 layers261.3 × 165.2 mmLaser driver v3 Power, the printed circuit board in 3D

    Laser driver v3 Power

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    280 parts
  • 2 layers96.5 × 98 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    78 parts59
  • 2 layers110.1 × 68.8 mmEHVGenerator, the printed circuit board in 3D

    EHVGenerator

    Firestorm108/Bipolar-EHV-Generator

    An extreme high voltage generator that utilizes a bipolar setup to effectively create a 300kV+ voltage difference.

    20 parts
  • 2 layers150 × 100 mmPuente h doble rev8.1.5, the printed circuit board in 3D

    Puente h doble rev8.1.5

    impatrq/bias

    BIAS es un proyecto innovador que busca mejorar la movilidad de las personas con discapacidades motrices a través de una silla de ruedas controlada por señales cerebrales.

    24 parts
  • 2 layers150 × 100 mmPuente h doble rev8.1.7, the printed circuit board in 3D

    Puente h doble rev8.1.7

    impatrq/bias

    BIAS es un proyecto innovador que busca mejorar la movilidad de las personas con discapacidades motrices a través de una silla de ruedas controlada por señales cerebrales.

    26 parts
  • 2 layers160 × 100 mmMains 18V TEC, the printed circuit board in 3D

    Mains 18V TEC

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    88 parts
  • 2 layers160 × 100 mmPm22V, the printed circuit board in 3D

    Pm22V

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    28 parts
  • 2 layers160 × 100 mmPm22V, the printed circuit board in 3D

    Pm22V

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    28 parts