
Max48 ISSUE4
alvaroalea/all-spectrum-clones
Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

ZX Spider 48K by 'Skoti' https://github.com/konkotgit/ZX-48-Spider recreated in Kicad 10 to get a full ibom including tracks and vias. The gerbers in the Gerbers folder are those from Skoti. I would NOT generate gerbers from this pcb and have boards made without fully checking every track and via for position.
ZX Spider-48 is an open-source printed circuit board by liveboxandy, from the liveboxandy/ZX-Spider-48 repository on GitHub. It is a 2-layer board of 213.5 × 130.5 mm with 150 parts on 218 nets, routed with 10,373 tracks and 207 vias.
It is built around the 74HCT240D, 27C256-17/J and 74HC04D, with the 74LS00SC, 74LS32SC and BC560 among its other parts. Its parts include 68 resistors, 26 capacitors, 16 connectors, 13 ICs and 10 transistors. It belongs with the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 470R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R41, R42 +11 |
| 16 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C5, C6, C7, C8, C9, C10, C11, C12, C22, C23, C24, C25, C29, C32, C37 |
| 16 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R18, R38, R39, R40, R52, R55, R59, R60, R61, R62, R63, R67, R68, R69, R70, R71 |
| 8 | BC560 | Package_TO_SOT_THT:TO-92_Inline | Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15 |
| 6 | 150R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R15, R16, R17, R19, R36, R76 |
| 4 | 1K0 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8, R9, R10, R11 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4, D5, D15 |
| 3 | 10K | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4, C21 |
| 3 | 180R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C17, C18 |
| 2 | 150K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13, R14 |
| 2 | 2K2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7 |
| 2 | 33K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R65, R66 |
| 2 | 470K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R58, R72 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C39 |
| 2 | HM62256 | Package_DIP:DIP-28_W15.24mm_Socket | U5, U7 |
| 1 | 0R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R64 |
| 1 | 100pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C20 |
| 1 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C15 |
| 1 | 14.000 Mhz | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | 1N4742A | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 270R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R21 |
| 1 | 27C256 | Package_DIP:DIP-28_W15.24mm_Socket | U10 |
| 1 | 3.3nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C16 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R56 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 74HC04 | Package_DIP:DIP-14_W7.62mm_Socket | U6 |
| 1 | 74HCT240 | Package_DIP:DIP-20_W7.62mm_Socket | U11 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm_Socket | U18 |
| 1 | 74LS138 | Package_DIP:DIP-16_W7.62mm_Socket | U16 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket | U9 |
| 1 | 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | AUDIO | MOD:SJ13525NGPI | J4 |
| 1 | AY-3-8910 | Package_DIP:DIP-40_W15.24mm_Socket | U4 |
| 1 | AY-3-8912 | Package_DIP:DIP-28_W15.24mm_Socket | U1 |
| 1 | BC517 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | BottomLeft3.302mm | MountingHole:MountingHole_3.2mm_M3 | HBL1 |
| 1 | BottomRight3.302mm | MountingHole:MountingHole_3.2mm_M3 | HBR1 |
| 1 | DB9_Pins | Connector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J16 |
| 1 | Diode_Bridge | Diode_THT:Diode_Bridge_Round_D8.9mm | D1 |
| 1 | EAR/MIC | MOD:SJ13525NGPI | J11 |
| 1 | EPM7128SLC84-10 | Package_LCC:PLCC-84_THT-Socket | U2 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | KB_CONN_05 | MOD:CONN_5-520315-5_TYC | J12 |
| 1 | KB_CON_08 | MOD:CONN_5-520315-8_TYC | J8 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | LeftMiddle_5mm | MountingHole:MountingHole_5.3mm_M5 | HLM1 |
| 1 | ON/OFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | PWR LED | LED_THT:LED_D3.0mm | D6 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | ROM_SW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | RightMiddle_5mm | MountingHole:MountingHole_5.3mm_M5 | HRM1 |
| 1 | SPK+ | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J9 |
| 1 | SPK- | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J10 |
| 1 | SPK_ON_OFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Speaker_15mm | MOD:MountingHole_15mm | HSpeaker1 |
| 1 | TE Mini-DIN-8 1658998-1 | MOD:1658998-1 | J6 |
| 1 | TopMiddle_3.302mm | MountingHole:MountingHole_3.2mm_M3 | HTM1 |
| 1 | Z80 | Package_DIP:DIP-40_W15.24mm_Socket | U8 |
| 1 | ZX_48K_EDGE | MOD:ZX_BUS_A_TOP | J15 |

alvaroalea/all-spectrum-clones
Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics


alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics



It measures 213.5 × 130.5 mm and has 2 copper layers, 1.6 mm thick.
150 parts, built around the 74HCT240D, 27C256-17/J, 74HC04D and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the liveboxandy/ZX-Spider-48 repository on GitHub, at the commit this page was made from: the board is ZXSpider48.kicad_pcb and its schematic AY2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask liveboxandy before reusing the design.