
HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu

W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
HVAC STM32F7 PCB is an open-source printed circuit board by Jopolle, from the Jopolle/INZYNIERKA repository on GitHub. It is a 4-layer board of 200 × 130 mm with 110 parts on 100 nets, routed with 826 tracks and 944 vias.
It is built around the ADS8688IDB, DAC7568IAPW and LM2596S-3.3, with the LM2596S-5.0, SK56 and 1N4742A among its other parts. Its parts include 34 capacitors, 24 resistors, 18 connectors, 7 diodes and 6 ICs. It belongs with the STM32 boards of this library.
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
Folder HVAC_STM32F7_PCB zawiera schematy projektowanego PCB jak i projekt samej płytki
Folder dokumentacja zawiera pliki LaTeX pracy inżynierskiej i ostatnią skompilowaną wersję
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R17, RG1, RG2, RG3, RG4, RG5, RG6, RG7, RG8 |
| 10 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12, C18, C19, C20, C21, C22, C23, C24, C25 |
| 8 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 |
| 8 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RF1, RF2, RF3, RF4, RF5, RF6, RF7, RF8 |
| 8 | OUT_Signal_connector | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J21, J22, J23, J24, J25, J26, J27, J28 |
| 8 | Signal_connector | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C32, C33 |
| 3 | 100u/63V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C2, C5, C15 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11X7R1, C13 |
| 3 | LED | LED_THT:LED_D5.0mm_Clear | D5, D6, D7 |
| 2 | 100u/20V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C3, C8 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C14 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 33uH | Inductor_SMD:L_6.3x6.3_H3 | L2, L3 |
| 2 | 470n/100V | Capacitor_SMD:C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C1, C6 |
| 2 | 470n/120V | Capacitor_SMD:C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C4, C7 |
| 2 | GND | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3, TP4 |
| 2 | SK56 | Diode_SMD:D_SMB-SMC_Universal_Handsoldering | D1, D2 |
| 2 | TLV9304xPW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U5, U6 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 100n | Capacitor_SMD:C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C26 |
| 1 | 100n/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 150nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 1N4742A | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D4 |
| 1 | 1u | Capacitor_SMD:C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C16 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 3.3V | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 4.7u/50V | Capacitor_SMD:C_2220_5750Metric_Pad1.97x5.40mm_HandSolder | C29 |
| 1 | 47u | Capacitor_SMD:C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C27 |
| 1 | 5V | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | 65uH | Inductor_SMD:L_12x12mm_H4.5mm | L1 |
| 1 | 75K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ADS8688 | Package_SO:TSSOP-38_4.4x9.7mm_P0.5mm | U7 |
| 1 | AO4407A | własne:PowerPAK_SO-8_Single | Q1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J18 |
| 1 | DAC7568IAPW | własne:dac | U3 |
| 1 | DC_Jack_5.5x2.1mm | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Ferrite | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | FB1 |
| 1 | Fuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2 |
| 1 | LM2596S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | ON/OFF | slide_switches:SLW-1276864-4A-D_FOOTPRINT | SW1 |
| 1 | PPTC 1.1A/30V | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | SMBJ33A | Diode_SMD:D_SMB_Handsoldering | D3 |
| 1 | STM32F746NG DISCO | własne:STM32F7_DISCO | A1 |

Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu

jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp

Eryk-Mozdzen/hogger2
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them

ginomcfino/smart-fan-controller
Dual-fan controller with temperature sensing, tachometer monitoring, overtemperature alarm, and manual override. Designed in KiCad.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

venatarch/regenerative_braking
Recover braking energy from a BLDC motor using bidirectional MOSFET switching.

AMOVFC/PanTilt
Three projects live in this folder. They share NewLibrary.kicadsym, TMC2209.pretty and the same philosophy: nothing on the board needs precision placement, every active part is a module in a socket.

It measures 200 × 130 mm and has 4 copper layers, 1.6 mm thick.
110 parts, built around the ADS8688IDB, DAC7568IAPW, LM2596S-3.3 and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jopolle/INZYNIERKA repository on GitHub, at the commit this page was made from: the board is HVAC_STM32F7_PCB/HVAC_STM32F7_PCB.kicad_pcb and its schematic HVAC_STM32F7_PCB/HVAC_STM32F7_PCB-backups/HVAC_STM32F7_PCB-2025-11-12_002341/HVAC_STM32F7_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jopolle before reusing the design.