4 layers409.6 × 20 mm
UniMixFeeders
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
105 parts6
4 layers130.5 × 171 mm
UniMixBase
jarekkt/UniController6This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
- Size
- 130.5 × 171 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 157
- Nets
- 362
- Pads
- 806
- Tracks, vias
- 1,467, 227
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Dec 2020
- Updated
- 28 May 2025
Overview
UniMixBase is an open-source printed circuit board by jarekkt, from the jarekkt/UniController repository on GitHub. It is a 4-layer board of 130.5 × 171 mm with 157 parts on 362 nets, routed with 1,467 tracks and 227 vias.
It is built around the TMC2209SILENTSTEPSTICK, TLE9251VSJ and VNN3NV04PTR-E, with the 74AHC04D, SK56 and 05200101Z among its other parts. Its parts include 51 resistors, 31 capacitors, 24 ICs, 24 connectors and 12 diodes.
Main components
7TMC2209SILENTSTEPSTICK
-Power Management - Modules ROHSTRINAMIC Motion Control GmbHModules
TLE9251VSJ
DSO-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 60mA CAN Transceiver DSO-8 CAN Transceivers ROHSInfineon TechnologiesCAN Transceivers
VNN3NV04PTR-E
SOT-223-4-40℃~+150℃ 100uA 250ns 250ns MOSFET Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) SOT-223-4 Gate Drivers ROHSSTMicroelectronicsGate Drivers
74AHC04D
SOIC-14-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、4.4V 2V~5.5V 2uA 500mV~1.65V 6 7.5ns@5V,50pF 74AHC 8mA 8mA SOIC-14 Inverters ROHSNexperiaInverters
SK56
SMBG-50℃~+150℃ 150A 500uA@60V 5A 60V 700mV@5A Independent SMCG Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
05200101Z
-10A 20mm 5mm 600V Clip Cylindrical - Fuseholders ROHSLittelfuseFuseholders
BAV99S
SOT-3631.25V@150mA 150mA 1uA@75V 2 Pair Series Connection 2.5A 200mW 6ns 85V SOT-363 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdUniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
Parts
157| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +13 |
| 14 | 220R | Resistor_SMD:R_0603_1608Metric | R25, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R44, R45 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C7, C14, C16, C18, C20, C22, C24, C26, C27, C29, C30, C32 |
| 12 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1, J2, J3, J4, J5, J7, J8, J9, J14, J18, J20, J21 |
| 11 | SK56 | Diode_SMD:D_SMB | D1, D2, D4, D5, D6, D7, D8, D9, D10, D11, D14 |
| 9 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 9 | VNN3NV04PTR-E | footprints:SOT230P700X180-4N | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC11 |
| 8 | 100uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4, C5, C6, C8, C9 |
| 6 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C15, C17, C19, C21, C23, C25 |
| 6 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11, J12, J13, J31, J32, J33 |
| 6 | TMC2209_SILENTSTEPSTICK | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U2, U3, U4, U6, U7, U13 |
| 4 | 120R | Resistor_SMD:R_1206_3216Metric | R48, R49, R50, R51 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 74AHC04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5, U9, U10 |
| 3 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6, J10, J22 |
| 2 | 05200101Z | footprints:05200101Z | F1, F2 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R10 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R26, R27 |
| 2 | Conn_01x06_Male | Connector_JST:JST_XH_B6B-XH-AM_1x06_P2.50mm_Vertical | J15, J16 |
| 2 | MP1584 DC/DC | footprints:MP1584_mod | U8, U11 |
| 1 | 100n / 16V | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C28 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | AM26LV32xD | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U14 |
| 1 | AP7375-50W5-7 | footprints:SOT95P285X140-5N | IC9 |
| 1 | BAV99S | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D3 |
| 1 | Conn_01x04_Male | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J24 |
| 1 | NUCLEO-H755 | footprints:MODULE_NUCLEO-H753ZI | U1 |
| 1 | TLE9251VSJ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
More from jarekkt/UniController
3- 4 layers82.5 × 75.5 mm
UniMixHeadFd
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
83 parts6 - 2 layers80 × 45 mm
UniMixHead
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
26 parts6
Similar boards
- 8 layers85 × 55 mm
Dadu 8L 2side 85x55
comedy1982-spec/pcb-viewer
Dadu 기반 ELD 솔레노이드 ECU. 12 V 입력, TC364 · CAN-FD · PMIC, PCB 위 센서는 NTC 하나. A4911(3상 드라이버)의 A·B 레그로 H-브리지(하프브리지 IAUC60N04S6N050H ×2, 레그 션트 2 mΩ ×2), C 레그는 비워 두고 SPI로 그 고장(VC · CHO · CLO · OC3)을 마스크.
130 parts - 2 layers125 × 145 mm
MPPT
lhr-solar/Power-Generation-Sunscatter
The current maintainer of this project is Matthew Yu as of 07/16/2023. His email is matthewjkyu@gmail.com.
134 parts - 4 layers100 × 70 mm
Controller
Eryk-Mozdzen/hogger2
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them
208 parts2 - 4 layers200 × 130 mm
HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
110 parts - 4 layers110.7 × 69.8 mm
Sgb mbc5 1-4
MouseBiteLabs/Super-Game-Boy-Plus
A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.
95 parts41CC-BY-SA-4.0 - 4 layers126 × 66 mm
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers
634 parts25 - 2 layers55 × 25 mm
Headless tef lite
FMDX-org/headless-tef-lite
Small low cost Headless TEF variant.
97 parts10CERN-OHL-W-2.0 - 2 layers20.8 × 31.4 mm
OneMoreThermistor
cbc02009/OneMoreStupidThermistor
For when you need just one (or two) more stupid thermistor ports on your printer. This board takes an MCU of the Xiao or adafruit QT PY formfactor
13 parts7GPL-3.0
Questions
How big is the UniMixBase PCB?
It measures 130.5 × 171 mm and has 4 copper layers, 1.6 mm thick.
What parts does the UniMixBase use?
157 parts, built around the TMC2209SILENTSTEPSTICK, TLE9251VSJ, VNN3NV04PTR-E and 74AHC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UniMixBase KiCad files?
From the jarekkt/UniController repository on GitHub, at the commit this page was made from: the board is hardware/12_mixture/UniMixBase/UniMixBase.kicad_pcb and its schematic hardware/12_mixture/UniMixBase/UniMixBase.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UniMixBase design in my own project?
Its repository states no licence, so its author keeps all rights: ask jarekkt before reusing the design.