4 layers110.7 × 69.8 mm
Sgb mbc5 1-4
MouseBiteLabs/Super-Game-Boy-Plus
A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.
95 parts41CC-BY-SA-4.0
2 layers20.8 × 31.4 mm
OneMoreThermistor
cbc02009/OneMoreStupidThermistor7For when you need just one (or two) more stupid thermistor ports on your printer. This board takes an MCU of the Xiao or adafruit QT PY formfactor
- Size
- 20.8 × 31.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 18
- Pads
- 40
- Tracks, vias
- 36, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 May 2022
- Updated
- 12 Jun 2022
Overview
OneMoreThermistor is an open-source printed circuit board by cbc02009, from the cbc02009/OneMoreStupidThermistor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 20.8 × 31.4 mm with 13 parts on 18 nets, routed with 36 tracks and 12 vias.
It is built around the BAV99S. Its parts include 6 resistors, 4 connectors, 2 capacitors and 1 diode.
Main components
1README
README.mdOneMoreStupidThermistor
For when you need just one (or two) more stupid thermistor ports on your printer. This board takes an MCU of the Xiao or adafruit QT PY formfactor
Images
Seeduino Xiao Config Example
[mcu jomt]
serial: /dev/serial/by-id/usb-Klipper_samd21g18a_F6407A985733535020312E322A090CFF-if00
restart_method: command
#If using T1
[temperature_sensor chamber]
sensor_type: Generic 3950
sensor_pin: jomt:PA2
#If using T2
[temperature_sensor chamber]
sensor_type: Generic 3950
sensor_pin: jomt:PA5Adafruit QT Py rp2040 Config Example
[mcu jomt]
serial: /dev/serial/by-id/usb-Klipper_rp2040_DF60BCA003201A39-if00
restart_method: command
#If using T1
[temperature_sensor chamber]
sensor_type: Generic 3950
sensor_pin: jomt:gpio28
#If using T2
[temperature_sensor chamber]
sensor_type: Generic 3950
sensor_pin: jomt:gpio29Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2.37K | Resistor_SMD:R_0805_2012Metric | R2, R3, R5, R6 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J4 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2, J3 |
| 1 | BAV99S | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D1 |
Similar boards
- 4 layers126 × 66 mm
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers
634 parts25 - 2 layers55 × 25 mm
Headless tef lite
FMDX-org/headless-tef-lite
Small low cost Headless TEF variant.
97 parts10CERN-OHL-W-2.0 - 4 layers130.5 × 171 mm
UniMixBase
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
157 parts6 - 2 layers40 × 40 mm
PN532
mgalea/ESP32-PN532
PN532 (HSU) drivers for ESP32 using ESP-IDF, and full PCB design for NFC reader.
55 parts1GPL-3.0 - 2 layers14 × 28 mm
Shelly
AndreTeixeira1998/Shelly-Tasmotizer-PCB
PCB design for serial Tazmotizer programmer for Shelly power modules
26 parts - 6 layers343.6 × 83.8 mm
PFM Controller V4
everettpenne/PFMV4_Prelim_Files
PFM Controller V4 files for independent design review. For application controlling the Limiter, HVPS, and Transrex supplies.
514 parts - 4 layers100 × 100 mm
Questions
How big is the OneMoreThermistor PCB?
It measures 20.8 × 31.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OneMoreThermistor use?
13 parts, built around the BAV99S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OneMoreThermistor KiCad files?
From the cbc02009/OneMoreStupidThermistor repository on GitHub, at the commit this page was made from: the board is OneMoreThermistor.kicad_pcb and its schematic OneMoreThermistor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OneMoreThermistor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).