

Controller
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them
- Size
- 100 × 70 mm
- Copper layers
- 4
- Thickness
- 1.65 mm
- Parts
- 208
- Nets
- 188
- Pads
- 776
- Tracks, vias
- 1,543, 483
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Oct 2024
- Updated
- 24 Jun 2025
Overview
Controller is an open-source printed circuit board by Eryk-Mozdzen, from the Eryk-Mozdzen/hogger2 repository on GitHub. It is a 4-layer board of 100 × 70 mm with 208 parts on 188 nets, routed with 1,543 tracks and 483 vias.
It is built around the ESP32-C3-WROOM-02-H4, LM2105D and MCP6541R, with the TXS0101DBV, HMC5883L and LM1117MP-3.3 among its other parts. Its parts include 76 capacitors, 63 resistors, 21 ICs, 14 connectors and 13 transistors. It belongs with the robots and motor control boards and the ESP32, STM32 and RISC-V boards of this library.
Main components
12ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM2105D
SOIC-8SOIC-8 Gate Drivers ROHSTexas InstrumentsGate DriversMCP6541R
UncategorisedMicrochip TechnologyTXS0101DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~3.6V 2.3V~5.5V 24Mbps Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersHMC5883L
LGA-16_L3.0-W3.0-P0.50LPCC-16(3x3) New Arrivals ROHSHoneywellUncategorisedLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLV14340DDA
HSOICHSOIC Pre-ordered Chips ROHSTexas InstrumentsPre-Ordered ChipsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)IPD90N04S4L-04-VB
TO-252MOSFETsVBsemi ElecDMPH4013SK3
TO-252(DPAK)-55℃~+175℃ 1 P-Channel 15mΩ@10V 2.1W 229pF 31nC@4.5V 3V 4.004nF 40V 55A TO-252(DPAK) MOSFETs ROHSDiodes IncorporatedMOSFETsSK56
SMBG-50℃~+150℃ 150A 500uA@60V 5A 60V 700mV@5A Independent SMCG Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdTwo HOG wheel robot Hogger^2
Hogger^2 is mobile robot with two HOG (Hemispherical Omnidirectional Gimbaled) wheels.
- kinematic models were derived by Paweł Joniak in his engineering thesis (2014)
- chassis was originally created by Damian Góral in his engineering thesis (2017)
- control algorithms were designed by Paweł Joniak in his master thesis (2017)
- code generation technique was proposed by Jędrzej Boczar in his master thesis (2019)
- JSON based communication was proposed by Tomasz Lubelski in his engineering thesis (2023)
CAD project
CAD files are developed using Onshape here.
Hardware overview
Software overview
Parts
208| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C15, C20, C22, C25, C30, C31, C33, C34, C36, C40, C44, C49 +12 |
| 19 | 47k | Resistor_SMD:R_0603_1608Metric | R11, R22, R25, R27, R28, R34, R36, R37, R40, R42, R43, R46, R48, R49, R55, R57 +3 |
| 13 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R8, R10, R13, R24, R30, R38, R45, R51, R59 |
| 12 | 68 | Resistor_SMD:R_0603_1608Metric | R23, R26, R32, R35, R39, R41, R44, R47, R53, R56, R60, R62 |
| 12 | IPD90N04S4L04 | Package_TO_SOT_SMD:TO-252-2 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13 |
| 8 | 47u/50V | Capacitor_SMD:CP_Elec_6.3x7.7 | C43, C48, C53, C58, C63, C68, C71, C75 |
| 7 | 100n/50V | Capacitor_SMD:C_0603_1608Metric | C21, C41, C47, C52, C56, C62, C67 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric | C42, C46, C50, C57, C61, C65 |
| 6 | 1u/50V | Capacitor_SMD:C_0603_1608Metric | C39, C45, C51, C54, C60, C66 |
| 6 | 220k | Resistor_SMD:R_0603_1608Metric | R29, R31, R33, R50, R52, R54 |
| 6 | Conn_01x01 | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm | J5, J6, J7, J9, J10, J11 |
| 6 | LM2105D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9, U11, U13, U15, U17, U19 |
| 6 | MCP6541 | Package_TO_SOT_SMD:SOT-23-5 | U8, U10, U12, U14, U16, U18 |
| 6 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 5 | 100u | Capacitor_SMD:C_1206_3216Metric | C10, C11, C12, C13, C14 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R9, R12, R17 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C23, C24, C38 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 10u/50V | Capacitor_SMD:C_1206_3216Metric | C26, C32 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C18, C19 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 47u/16V | Capacitor_SMD:C_1210_3225Metric | C27, C28 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J8, J12 |
| 2 | Mini-SPOX | hogger2:Molex-MiniSPOX-22057035-5268 | J13, J14 |
| 2 | TXS0101DBV | Package_TO_SOT_SMD:SOT-23-6 | U20, U21 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 17.8k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.2n | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C37 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 6.8u/4.5A | hogger2:PA4341.XXXNLT | L1 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J4 |
| 1 | DMPH4013SK3 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | HMC5883L | hogger2:HMC5883L_handsolder | U7 |
| 1 | IDC-10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LV14340 | hogger2:LV14340 | U5 |
| 1 | MPU-6050 | hogger2:MPU6050_handsolder | U6 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | SK56 | Diode_SMD:D_SMB | D3 |
| 1 | STM32H523RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | hogger2:spst_6x3mm | SW1 |
| 1 | SW_SPST | hogger2:JS102011SAQN | SW2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | XT-60 | hogger2:XT60PW-M | J3 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D1 |
Similar boards
- 4 layers188 × 110 mm

- 4 layers130.5 × 171 mm

UniMixBase
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
157 parts6 - 4 layers200 × 130 mm

HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
110 parts - 4 layers77.3 × 48.5 mm

ESP32 IOT
WasikeIsaac/ESP32_IOT-PCB-
ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.
87 parts1 - 2 layers347.7 × 123.8 mm

- 4 layers45 × 89 mm

- 2 layers96.6 × 100 mm

- 4 layers26.5 × 57.4 mm

MotorDriver
Kmshanley/MiniRobots
Firmware and PCB desgin for mini robots with UWB localization and lidar mapping
50 parts1
Questions
How big is the Controller PCB?
It measures 100 × 70 mm and has 4 copper layers, 1.65 mm thick.
What parts does the Controller use?
208 parts, built around the ESP32-C3-WROOM-02-H4, LM2105D, MCP6541R and TXS0101DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the Eryk-Mozdzen/hogger2 repository on GitHub, at the commit this page was made from: the board is hardware/controller/controller.kicad_pcb and its schematic hardware/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eryk-Mozdzen before reusing the design.