
ESP32 BME690
andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.

ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.
ESP32 IOT is an open-source printed circuit board by WasikeIsaac, from the WasikeIsaac/ESP32_IOT-PCB- repository on GitHub. It is a 4-layer board of 77.3 × 48.5 mm with 87 parts on 75 nets, routed with 626 tracks and 141 vias.
It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the CP2102N-A02-GQFN20, MAX4466EXK+T and W25Q32JVSSIQ among its other parts. Its parts include 32 resistors, 21 capacitors, 8 ICs, 6 diodes and 5 connectors. It belongs with the home automation and IoT and audio and music boards and the ESP32 and RISC-V boards of this library.
ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C8, C9, C13, C14, C16, C17, C18, C19, C20 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R11, R12 |
| 5 | 10u | T491A106M016AT:RESC3216X125N | C3, C6, C7, C10, C12 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R28, R30, R31, R32 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R6, R19, R23 |
| 4 | 50 | Resistor_SMD:R_0805_2012Metric | R14, R15, R18, R20 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C11, C21 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric | R4, R24, R25 |
| 3 | LTST-C170KRKT | LTST-C170KRKT:DIOC200X125X110 | D3, D4, D5 |
| 3 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170GKT | LTST-C170GKT:LED_LTST-C170GKT | D1, D6 |
| 2 | USLPT2819DT2TR | USLPT2819DT2TR:SW_USLPT2819DT2TR | S1, S2 |
| 1 | 0.1 | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 0ZCH0110AF2E | 0ZCH0110AF2E:FUSC3225X100N | F1 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 22k1 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 47k5 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | B2B-PH-SM4-TB | B2B-PH-SM4-TB:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | BME280:PSON65P250X250X100-8N | U7 |
| 1 | CMC-5042PF-AC | CMC-5042PF-AC:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-A02-GQFN20 | CP2102N-A02-GQFN20 (1):WFQFN-20 | U3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U4 |
| 1 | GSD090012SEU | GSD090012SEU:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LTST-C170TBKT | LTST-C170TBKT:DIOC200X125X110 | D2 |
| 1 | MAX4466EXK | MAX4466EXK:SOT65P210X110-5N | U8 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | SS-52400-002 | SS-52400-002:BELFUSE_SS-52400-002 | J1 |
| 1 | TEMT6000X01 | TEMT6000X01:TRANS_TEMT6000X01 | Q1 |
| 1 | Test CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Test CS_SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Test MISO | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Test MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | Test SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U6 |

andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.

BBIkal/ESP32_IOT_Project
A compact 4-layer mixed-signal PCB designed in KiCad 9, built around the ESP32-C3 module for IoT sensor applications.

chopda15/ESP32-sensor-board
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.



Kaushalyasamantha/ESP32-C3-IoT-Dev-Board
"A custom 4-layer IoT development board built around the ESP32-C3 in KiCad 9"

pasensiojimenez/esp32-sensor-board
4-layer ESP32-C3 IoT development board designed in KiCad 10. Onboard power management (USB-C/LiPo), environmental sensors (BME280, light, sound), and SD/flash storage.

KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.
It measures 77.3 × 48.5 mm and has 4 copper layers, 1.6 mm thick.
87 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and CP2102N-A02-GQFN20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WasikeIsaac/ESP32_IOT-PCB- repository on GitHub, at the commit this page was made from: the board is ESP32_IOT.kicad_pcb and its schematic ESP32_IOT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WasikeIsaac before reusing the design.