
Route
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

Recover braking energy from a BLDC motor using bidirectional MOSFET switching.
Regenerative braking is an open-source printed circuit board by venatarch, from the venatarch/regenerative_braking repository on GitHub. It is a 4-layer board of 145.8 × 130.1 mm with 217 parts on 121 nets, routed with 843 tracks and 62 vias.
It is built around the LM2596S-5.0, LM339DT and BAT54T1G, with the SMBJ33A, SS34 and SS34H among its other parts. Its parts include 83 resistors, 41 capacitors, 27 connectors, 19 diodes and 8 transistors.
Recover braking energy from a BLDC motor using bidirectional MOSFET switching.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R16, R23, R27, R34, R38, R45, R49, R55, R56, R57, R59, R60, R61, R65, R66 +5 |
| 14 | BAT54T1G | Regen_braking:SODFL3718X115 | D_OV1, D_OV2, D_OV3, D_OV4, D_OV5, D_OV6, D_OV7, D_UV1, D_UV2, D_UV3, D_UV4, D_UV5, D_UV6, D_UV7 |
| 12 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R10, R21, R25, R32, R36, R43, R47, Rbias1, Rbias2, Rbias3, Rbias4 |
| 10 | 1000uf | Capacitor_THT:C_Radial_D12.5mm_H25.0mm_P5.00mm | C4, C5, C6, C7, C8, C10, C11, C12, C13, C14 |
| 8 | 1nf_snubber | Capacitor_SMD:C_1206_3216Metric | C16, C18, C21, C24, C25, C30, C33, C36 |
| 8 | 22ohm_snubber | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R7, R17, R22, R28, R33, R41, R44 |
| 8 | 33p | Capacitor_SMD:C_0805_2012Metric | C_Hi1, C_Li1, C20, C23, C26, C29, C31, C35 |
| 8 | 4.7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R11, R19, R26, R30, R37, R40, R48 |
| 8 | 47 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R9, R20, R24, R31, R35, R42, R46 |
| 8 | ~ | Regen_braking:IRLR3705ZPBF | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 7 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R50, R52, R58, R63, R64, R70, R74 |
| 6 | 10nf_rcFilter | Capacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mm | C37, C38, C40, C42, C43, C44 |
| 5 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R51, R53, R62, R68, R71 |
| 5 | 100nf_rcFilter | Capacitor_SMD:C_1206_3216Metric | C39, C41, C45, C46, C47 |
| 4 | 0.47uf_50v_BScap | Regen_braking:0.47uf_50v_BScap | C15, C19, C27, C32 |
| 4 | 2.2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R18, R29, R39 |
| 4 | 22 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12, R13, R14, R15 |
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R54, R72, R75, R78 |
| 4 | 4.7uf_50v_VDDcap | Regen_braking:4.7uf_50v_VDDcap | C17, C22, C28, C34 |
| 4 | D_boot | Regen_braking:boot_diode | D4, D11, D14, D17 |
| 4 | LED | LED_THT:LED_D5.0mm | D7, D8, D9, D10 |
| 4 | NetTie_4_Cross | NetTie:NetTie-4_SMD_Pad2.0mm | NT2, NT3, NT4, NT5 |
| 4 | UCC27710DR | Regen_braking:UCC27710DR | IC1, IC2, IC3, IC4 |
| 2 | ~ | Regen_braking:ACS_pad | INOUT_A1, INOUT_B1 |
| 1 | 120uf | Regen_braking:120uf_cap_5v_buck | C3 |
| 1 | 12V | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J13 |
| 1 | 1N5822 | Regen_braking:DIOAD1990W125L900D530 | D3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R76 |
| 1 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R77 |
| 1 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 330uf | Regen_braking:330uf_25v_cap_5v_buck | C9 |
| 1 | 33uh | Regen_braking:L_bdc | L2 |
| 1 | 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J20 |
| 1 | 3V3_ports | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | 4628 | Regen_braking:FUSE_4628 | F1 |
| 1 | 47uH | Regen_braking:CDRH8D43NP220NC | L1 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | 5V_ports | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | ACS1_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J21 |
| 1 | BAT_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J29 |
| 1 | BUS | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J23 |
| 1 | CAP_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J30 |
| 1 | COMP_EXTI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | GND_ports | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | GPIO_ports | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | HALL_EXTI | Regen_braking:Hall_UVW | J17 |
| 1 | HALL_EXTI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | LM2596S-5.0 | Regen_braking:5v_buck | VR1 |
| 1 | LM339DT | Regen_braking:SOIC127P600X175-14N | IC5 |
| 1 | L_in | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J4 |
| 1 | MOTOR_UVW | Regen_braking:CUI_TB004-508-03BE | J14 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
| 1 | Q_PWM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J26 |
| 1 | SMBJ33A | Regen_braking:DIOM5336X244N | D2 |
| 1 | SS34 | Regen_braking:DIO_SS34 | D1 |
| 1 | SS34_H | Regen_braking:DIO_SS34 | D5 |
| 1 | SS34_L | Regen_braking:DIO_SS34 | D6 |
| 1 | SS34_UH | Regen_braking:DIO_SS34 | D12 |
| 1 | SS34_UL | Regen_braking:DIO_SS34 | D13 |
| 1 | SS34_VH | Regen_braking:DIO_SS34 | D15 |
| 1 | SS34_VL | Regen_braking:DIO_SS34 | D16 |
| 1 | SS34_WH | Regen_braking:DIO_SS34 | D18 |
| 1 | SS34_WL | Regen_braking:DIO_SS34 | D19 |
| 1 | U | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J15 |
| 1 | U_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | U_PWM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | V | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J18 |
| 1 | V_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J27 |
| 1 | V_PWM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | W | Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mm | J19 |
| 1 | W_ADC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J28 |
| 1 | W_PWM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J25 |
| 1 | XT60PB-M | Regen_braking:XT60PBM | J1 |
| 1 | ~ | Regen_braking:Switch_Rocker_KCD3-101N | KCD3-101N1 |

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.



willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels


AMOVFC/PanTilt
Three projects live in this folder. They share NewLibrary.kicadsym, TMC2209.pretty and the same philosophy: nothing on the board needs precision placement, every active part is a module in a socket.

Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu

rein-baremetal/REIN_R1_KiCad
Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration
It measures 145.8 × 130.1 mm and has 4 copper layers, 1.6 mm thick.
217 parts, built around the LM2596S-5.0, LM339DT, BAT54T1G and SMBJ33A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the venatarch/regenerative_braking repository on GitHub, at the commit this page was made from: the board is Hardware/Regenerative_Braking/Regenerative_Braking.kicad_pcb and its schematic Hardware/Regenerative_Braking/BMS_supeCapBuffer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask venatarch before reusing the design.