

LandyGauge
Open-source ESP32-S3 vehicle instrument gauge
- Size
- 84.5 × 94.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 86
- Pads
- 391
- Tracks, vias
- 956, 156
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2026
- Updated
- 23 Apr 2026
Overview
LandyGauge is an open-source printed circuit board by paulrbarnard, from the paulrbarnard/LandyGauge repository on GitHub. It is a 2-layer board of 84.5 × 94.5 mm with 129 parts on 86 nets, routed with 956 tracks and 156 vias.
It is built around the ADS1115IDGS, LIS3MDL and LM2596S-3.3, with the LM2596S-5.0, EL817S1(C)(TU) and IN4148W among its other parts. Its parts include 28 resistors, 14 ICs, 14 diodes, 8 transistors and 7 connectors.
Main components
12ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorisedLIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsLM2596S-3.3
TO-263-5L-20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSGRDC-DC ConvertersLM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersEL817S1(C)(TU)
SOP-4-2.54mm-55℃~+110℃ 1 1.2V 100mV@1mA,20mA 18us@2mA,100Ω 18us@2mA,100Ω 35V 50mA 5kV 6V DC Phototransistor SOP-4-2.54mm Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output OptoisolatorsIN4148W
SOD-123SOD-123 New Arrivals ROHSWorldUncategorisedSMBJ16A
DO-214AA(SMB)16V 19.7V 23.08A 26V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SMBJ24CA
DO-214AA(SMB)ESD And Surge Protection (TVS/ESD)hongjiachengSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching DiodesSRN6045-330M
SMD,6x6mm1.4A 1.5A 188mΩ 33uH ±20% SMD,6x6mm Power Inductors ROHSBournsPower InductorsMF-MSMF110-2
1812-40℃~+85℃ 100A 210mΩ 3.2mm 40mΩ 5.4mm 6V 800mW 1812 Resettable Fuses ROHSBournsResettable Fuses
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100K | Resistor_SMD:R_0805_2012Metric | R10, R12, R14, R16, R18, R20, R22, R24 |
| 8 | 100R | Resistor_SMD:R_0805_2012Metric | R9, R11, R13, R15, R17, R19, R21, R23 |
| 8 | 10K | Resistor_SMD:R_1206_3216Metric | R_PULL0, R_PULL1, R_PULL2, R_PULL3, R_PULL4, R_PULL5, R_PULL6, R_PULL7 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 2K2 | Resistor_SMD:R_1206_3216Metric | R_IN0, R_IN1, R_IN2, R_IN3, R_IN4, R_IN5, R_IN6, R_IN7 |
| 8 | AOZ1304N | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | EL817S1(C) | Package_SO:SO-4_4.4x3.6mm_P2.54mm | U4, U5, U6, U7, U8, U9, U10, U11 |
| 8 | IN4148W | Diode_SMD:D_SOD-123 | D_IN0, D_IN1, D_IN2, D_IN3, D_IN4, D_IN5, D_IN6, D_IN7 |
| 8 | SMBJ16A | Diode_SMD:D_SMA | D_TVS0, D_TVS1, D_TVS2, D_TVS3, D_TVS4, D_TVS5, D_TVS6, D_TVS7 |
| 8 | SMBJ24CA | Diode_SMD:D_SMB | D13, D14, D15, D16, D17, D18, D19, D20 |
| 5 | 100n | Capacitor_SMD:C_1206_3216Metric | C_12V2, C_U1, C_U2, C_U3, C_U12 |
| 3 | 01x02 5.08 pitch horizontal screw terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J4, J5, J7 |
| 3 | 47u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C_3V3, C_5V1, C_12V1 |
| 3 | SS34 | Diode_SMD:D_SMB | D2, D3, D4 |
| 2 | 01x08 5.08 pitch horizontal screw terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J3, J6 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric | R_SCL1, R_SDA1 |
| 2 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D5, D6 |
| 2 | JST_SH_1x04_1.0 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1, J2 |
| 2 | SRN6045-330M | Inductor_SMD:L_6.3x6.3_H3 | L1, L2 |
| 2 | TestPoint_Keystone_5015_Micro_Mini | TestPoint:TestPoint_Keystone_5015_Micro_Mini | 3V3, 5V |
| 1 | 01x03 5.08 pitch horizontal screw terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J_MAP1 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R25 |
| 1 | 330K | Resistor_SMD:R_1206_3216Metric | R27 |
| 1 | 33K | Resistor_SMD:R_1206_3216Metric | R28 |
| 1 | 47K | Resistor_SMD:R_1206_3216Metric | R26 |
| 1 | AD Add | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP6 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | IO Add0 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5 |
| 1 | IO Add1 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP4 |
| 1 | IO Add2 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP3 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U3 |
| 1 | LM2596S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U14 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U13 |
| 1 | MAG Add | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP7 |
| 1 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | MCP9600-I_MX | fp_lib:QFN65P500X500X100-21N | U12 |
| 1 | MF-MSMF110 | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | SCL PU | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | SDA PU | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | SMBJ33A | Diode_SMD:D_SMB | D1 |
| 1 | THERM Add | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP8 |
More from paulrbarnard/LandyGauge
2- 2 layers27.6 × 45.1 mm

- 2 layers110 × 100 mm

Similar boards
- 4 layers125 × 92 mm

Carradio peripheral rev03
gschuurman/android_vendor_gschuurman_vehicle_interfaces
vehicle interfaces for android automotive for a custom headunit
269 parts - 2 layers73.7 × 23.4 mm

ROV Light Module
PhilipMcGaw/robot-NautiPi
NautiPi is the physical hardware and embedded-project repository for the robot projects. It contains electronics, PCB and KiCad work, Arduino projects, component records, mechanical references, photographs, and retained…
57 parts - 2 layers95 × 75 mm

Smart Cabinet Fan
ginomcfino/smart-fan-controller
Dual-fan controller with temperature sensing, tachometer monitoring, overtemperature alarm, and manual override. Designed in KiCad.
61 parts - 4 layers200 × 130 mm

HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
110 parts - 2 layers190 × 109 mm

IOB v3.2.1
ADFTech/xtec-uc-ip-main-pcb
KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.
538 parts - 4 layers160 × 99.5 mm

High Current Driver
Strathclyde-EQOP/Vernier-Current-Driver
The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:
248 parts9CC-BY-SA-4.0 - 2 layers168.8 × 95.8 mm

- 2 layers70 × 40 mm

LoRaptor
smegg99/LoRaptor
LoRaptor is an open-source LoRa P2P mesh messaging platform with custom hardware, firmware and a chat app.
40 parts5MIT
Questions
How big is the LandyGauge PCB?
It measures 84.5 × 94.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LandyGauge use?
129 parts, built around the ADS1115IDGS, LIS3MDL, LM2596S-3.3 and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LandyGauge KiCad files?
From the paulrbarnard/LandyGauge repository on GitHub, at the commit this page was made from: the board is static/downloads/pcb-expansion-board/LandyGauge.kicad_pcb and its schematic static/downloads/pcb-expansion-board/LandyGauge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LandyGauge design in my own project?
Its repository states no licence, so its author keeps all rights: ask paulrbarnard before reusing the design.