
NixieSupply5vto170vDCMBoostMini
drkmsmithjr/NixiePowerSupply
170v Nixie Tube Power Supply from 5v Supply

ИН-12 Nixie Tube Clock built with Pico W and k155id1
Nixie clock is an open-source printed circuit board by alx-alexpark, from the alx-alexpark/nixie-clock repository on GitHub. It is a 2-layer board of 168.8 × 95.8 mm with 75 parts on 125 nets, routed with 1,051 tracks and 91 vias.
It is built around the EL817S1(C)(TU)-F, UCC3803D and PESD5V5C1BLYL, with the MH2029-600Y, MF-MSMF110-2 and BAT54WS-7-F-CN among its other parts. Its parts include 22 resistors, 19 capacitors, 9 ICs, 9 diodes and 3 transistors. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
A nixie tube clock made using ИН-12 (IN-12) tubes. Uses k155id1 drivers and a boost converter made using this reference design. Time is synchronized over WiFi using NTP (<1sec inaccuracy), and all firmware is written using CircuitPython.
Read more at https://parkalex.dev/posts/nixieclock
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF 16v | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C15, C16, C17, C18, C20 |
| 6 | 10.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R14, R15, R16, R17, R18 |
| 6 | IN-12A | nixies-us:nixies-us-IN-12-DSUB | NX1, NX2, NX3, NX4, NX5, NX6 |
| 6 | K155NA1 | Package_DIP:DIP-16_W7.62mm_LongPads | U2, U4, U5, U6, U7, U8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R13, R19, R21 |
| 3 | PESD5V5C1BLYL | Diode_SMD:D_SOD-882 | D6, D7, D8 |
| 2 | 0.1uF 250v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 2 | 100uF 16v | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C7 |
| 2 | 140 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R22 |
| 2 | 1uF 250v | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C11, C12 |
| 2 | 60ohm 100Mhz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1, L3 |
| 2 | M2 | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H1, H2 |
| 2 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 0 Ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 0.1 1/2W | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | R10 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 1.1A/2.2A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | 100pF 250v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 33uH | 7447709330:WE-PD_1210 | L2 |
| 1 | 4.12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 430pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47uF 16v | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 560pF 250v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 60.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 634k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 7.68k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | BAT54 | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | EL817S1(C)(TU)-F | easyeda2kicad:OPTO-SMD-4_L4.6-W6.5-P2.54-LS10.3-TL | U9 |
| 1 | ES1D | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | FDS2672CT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | Green LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | MMBTA42 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | PicoW | RPi_Pico:RPi_PicoW_SMD_TH | U3 |
| 1 | SM2T3V3A | easyeda2kicad:DO-216AA_L1.9-W1.9-LS3.8-FD | D9 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | TestPoint_Probe | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP2 |
| 1 | UCC3803 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

drkmsmithjr/NixiePowerSupply
170v Nixie Tube Power Supply from 5v Supply

mbelanger0/nixie-tube-clock
A nixie tube clock as a final PCB design project for ENGR3430: Eclectronics at Olin College of Engineering


fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources


crexodon/LED-Window-Matrix-Neo
Turning the campus building into a led display


karlp/kcell-faker
fake a load cell, for testing functional behaviour with changing loads.
It measures 168.8 × 95.8 mm and has 2 copper layers, 1.6 mm thick.
75 parts, built around the EL817S1(C)(TU)-F, UCC3803D, PESD5V5C1BLYL and MH2029-600Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alx-alexpark/nixie-clock repository on GitHub, at the commit this page was made from: the board is nixieclock.kicad_pcb and its schematic nixieclock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alx-alexpark before reusing the design.