Skip to the content
12345678

UCC3803D

Texas InstrumentsExtended

-40℃~+125℃ 1A 3.6V~12V 31kHz 4V 650mW 99% Boost、Flyback、Buck、Forward Isolation Over Current Protection、Soft-start、Under-voltage lockout、Leading edge blanking PWM Modulation Primary-side feedback SOIC-8 AC-DC Controllers and Regulators ROHS

Part id
ti/UCC3803D
Category
AC DC Controllers And Regulators
Package
SOIC-8
Pins
8
In stock
1 at JLCPCB (C701477)
Used on
4 open-source boards

Overview

The UCC3803D is an AC DC Controllers And Regulator made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1A 3.6V~12V 31kHz 4V 650mW 99% Boost、Flyback、Buck、Forward Isolation Over Current Protection、Soft-start、Under-voltage lockout、Leading edge blanking PWM Modulation Primary-side feedback SOIC-8 AC-DC Controllers and Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Controller:UCC3803, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C701477). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1COMP2FB3CS4RC5GND6OUT7VCC8REF
Regulator_Controller:UCC3803From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the UCC3803D
PinNameType
1COMPPassive
2FBInput
3CSInput
4RCPassive
5GNDPower in
6OUTOutput
7VCCPower in
8REFPower in

Open-source boards using it

4
  • 2 layers38.2 × 37.9 mmNixieSupply5vto160vDCMBoost, the printed circuit board in 3D

    NixieSupply5vto160vDCMBoost

    drkmsmithjr/NixiePowerSupply

    170v Nixie Tube Power Supply from 5v Supply

    47 parts98MIT
  • 2 layers168.8 × 95.8 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    alx-alexpark/nixie-clock

    ИН-12 Nixie Tube Clock built with Pico W and k155id1

    75 parts8
  • 2 layers165 × 51 mmCNIX V2 Control Board, the printed circuit board in 3D

    CNIX V2 Control Board

    Stustup/C-Nixie_CNIX

    Nixie Tube Clock with flexible tube driver

    112 parts

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the UCC3803D?

Yes. The symbol is Regulator_Controller:UCC3803 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UCC3803D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the UCC3803D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the UCC3803D?

JLCPCB lists it as part C701477, with 1 in stock; the sellers' links on this page open their listings.

What can replace the UCC3803D?

Parts like it in the library: the UCC3813DTR-5 by Texas Instruments, the UCC3813DTR-3 by Texas Instruments, the UCC2803QDRQ1 by Texas Instruments and the UCC3813PWTR-5 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UCC3803D?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.