
NixieSupply5vto170vDCMBoostMini
drkmsmithjr/NixiePowerSupply
170v Nixie Tube Power Supply from 5v Supply

170v Nixie Tube Power Supply from 5v Supply
NixieSupply5vto160vDCMBoost is an open-source printed circuit board by drkmsmithjr, from the drkmsmithjr/NixiePowerSupply repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.2 × 37.9 mm with 47 parts on 22 nets, routed with 356 tracks and 45 vias.
It is built around the UCC3803D, BAT54 and ES1D, with the MMBT4240 among its other parts. Its parts include 16 capacitors, 13 resistors, 6 connectors, 3 inductors and 2 diodes. It belongs with the lEDs and displays and power boards of this library.
See www.surfncircuits.com for a complete description. This github repository contains the Kicad Schematic, Spice Simulation, Efficiency Calculations of the 5v to 170v DCM Boost Converter for Powering your Nixie Tubes.

KC_NixieSupply5vto160v: Kicad schematic, PCB layout, BOM. The footprint is 1.5" x 1.5" and was described and optimized in Part 2 of the blog. The Board can be ordered from oshpark.com.
KC_NixieSupply5vto170vMini: KiCad schematic, PCB Layout, BOM of the "mini" version of the supply. This has a footprint of 1.5" x 1" by using smaller output capacitors and using the KiCad power tools to shrink the layout. This is the system defined by part 3 of the blog. The layout has all the same constraints as in Part 2. It still has four mounting holes, a USB input connector and a Terminal output connector. You can order the board from oshpark.com. 
SimCalcFiles: Spice simulation files and DCM Efficiency Calculations. NOTE: The LTSPICE (TM) simulation has trouble finding an initial operating point. To get the simulation to start, use the ESC key and press it twice to skip the initial operating point. This allows the simulation to continue and will provide a good transient response.
Datasheeets: Datasheets for different inductors and the power fet. In the Kicad Schematic, the part numbers and Digikey (TM) links are listed already. Also the complete BOM is located in the KICAD Directory.
See the complete blogs entry at www.surfncircuits.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF 250v | Capacitors_SMD:C_0805 | C3, C12, C13 |
| 3 | 100uF 16v | Capacitors_SMD:C_1210 | C4, C8, C16 |
| 2 | 0 Ohm | Resistors_SMD:R_0805 | R5, R6 |
| 2 | 100k | Resistors_SMD:R_0805 | R4, R9 |
| 2 | 1k | Resistors_SMD:R_0805 | R1, R8 |
| 2 | 1uF 250v | Capacitors_SMD:C_2220_HandSoldering | C1, C2 |
| 2 | 60ohm 100Mhz | Resistors_SMD:R_0805 | L2, L5 |
| 2 | CONN_01X01 | Mounting_Holes:MountingHole_2.2mm_M2 | J4, J5 |
| 2 | CONN_01X01 | Mounting_Holes:MountingHole_2.2mm_M2_Pad | J2, J3 |
| 1 | +160v | Connect:PINTST | TP14 |
| 1 | 0.1 1/2W | Resistors_SMD:R_0805 | R10 |
| 1 | 0.1uF | Capacitors_SMD:C_0805 | C18 |
| 1 | 0.1uF 16v | Capacitors_SMD:C_0805 | C10 |
| 1 | 100pF 250v | Capacitors_SMD:C_0805 | C6 |
| 1 | 1nF | Capacitors_SMD:C_0805 | C11 |
| 1 | 220pF | Capacitors_SMD:C_0805 | C5 |
| 1 | 2k | Resistors_SMD:R_0805 | R7 |
| 1 | 33uH | NixieSupply5vto160vDCMBoost_socket:Choke_SMD_12x12mm_Wurth_WE-PD | L3 |
| 1 | 4.12k | Resistors_SMD:R_0805 | R12 |
| 1 | 430pF | Capacitors_SMD:C_0805 | C7 |
| 1 | 47uF 16v | Capacitors_SMD:C_1206 | C14 |
| 1 | 560pF 250v | Capacitors_SMD:C_0603 | C15 |
| 1 | 60.4k | Resistors_SMD:R_0805 | R2 |
| 1 | 634k | Resistors_SMD:R_0805 | R15 |
| 1 | 7.68k | Resistors_SMD:R_0805 | R16 |
| 1 | BAT54 | Diodes_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | ES1D | Diodes_SMD:D_SMA_Handsoldering | D1 |
| 1 | FDS2672CT | etaclock:SOIC-8-N | Q1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MMBT42 | TO_SOT_Packages_SMD:SOT-23 | Q26 |
| 1 | N.U. | Resistors_SMD:R_0805 | R3 |
| 1 | OSHW_logo_silkscreen-front_5mm | OSHW_logo_silkscreen-front_5mm | G*** |
| 1 | SW_B | Connect:PINTST | TP12 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-3.5mm_4pol | J1 |
| 1 | UCC3803 | NixieSupply5vto160vDCMBoost_socket:SOIC-8-N | U1 |
| 1 | USB_OTG | NixieSupply5vto160vDCMBoost_socket:USB_Micro-B_Wurth_3A_Non-OVAL-Drill | P1 |

drkmsmithjr/NixiePowerSupply
170v Nixie Tube Power Supply from 5v Supply







pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve

It measures 38.2 × 37.9 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the UCC3803D, BAT54, ES1D and MMBT4240. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the drkmsmithjr/NixiePowerSupply repository on GitHub, at the commit this page was made from: the board is KC_NixieSupply5vTo160v/NixieSupply5vto160vDCMBoost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).