4 layers120 × 90 mm
Minstro combined board
benvonhandorf/minstro
Remote control head for SDRs using the SoapyRemote server
143 partsApache-2.0
4 layers100 × 75 mm
IMX6ULL tryout
cebrax/iMX6ULL_tryout8iMX6ULL development board
- Size
- 100 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 223
- Nets
- 276
- Pads
- 855
- Tracks, vias
- 9,191, 354
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210623)
- Created
- 12 Jul 2021
- Updated
- 14 Jul 2021
Overview
IMX6ULL tryout is an open-source printed circuit board by cebrax, from the cebrax/iMX6ULL_tryout repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 75 mm with 223 parts on 276 nets, routed with 9,191 tracks and 354 vias.
It is built around the ATSAMD10D13A-MN, TPS61169DCK and 78L05, with the F60C1A0004-M79R, DS1095-WNR0 and BAT54T1G among its other parts. Its parts include 81 capacitors, 45 resistors, 12 connectors, 8 ICs and 3 diodes. It belongs with the computers and single-board computers boards and the SAM D and SAM boards of this library.
Main components
8
ATSAMD10D13A-MN
HVQFN-24-EP(4x4)-40℃~+105℃ 1.62V~3.63V 10bit 12bit 22 32 Bit 48MHz 4KB 8KB ARM Cortex-M0+ Built-in FLASH HVQFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPS61169DCK
SC-70-5-40℃~+125℃ 1 1.2MHz 1.8A 2.7V~38V 2.7V~5.5V Boost Built-in DC-DC PWM Short Circuit Protection、Over Voltage Protection、Over-Temperature Protection (OTP)、LED open-circuit protection、Built-in soft-start SC-70-5 LED Drivers ROHSTexas InstrumentsLED Drivers
78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
F60C1A0004-M79R
FBGA-960℃~+85℃ 1.283V~1.45V 12mA 4Gbit 59mA 933MHz Auto precharge function、Data mask function、Dynamic on-chip termination、ZQ calibration function、Asynchronous reset function、Auto self-refresh DDR3L SDRAM FBGA-96 DDR SDRAM ROHSFORESEEDRAM
DS1095-WNR0
弯插-40℃~+85℃ 1 1.5A 14mm 1500 Cycles 30V Female Right Angle Type-A White 弯插 USB Connectors ROHSCONNFLY ElecUSB Connectors
BAT54T1G
SOD-123-55℃~+125℃ 1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
ES1D
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1A 1V@1A 200V 35ns 5uA@200V SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSMDDDiodes - Rectifiers - Fast Recovery
X1E0000210065
SMD3225-4P-40℃~+85℃ 19.2MHz 60Ω 7pF Crystal Oscillator ±10ppm SMD3225-4P Crystals ROHSSeiko EpsonCrystals
README
README.mdiMX6ULL_tryout
This is a test board to get iMX6ULL up and running using KiCad 5.99
The board has:
- iMX6ULL 900MHz MCIMX6Y2DVM09AB
- 512MB DDR3L RAM
- An SD card slot
- 2 x USB connector
- An ethernet PHY and connector with magnetics
- A 40-pin LCD connector
- Various pinouts of GPIO, RS232 and such..
Parts
223| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | G*** | svg2mod | svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod +34 |
| 46 | 1uF | new-abdullah:IPC-SMD-C-0402 | C1, C2, C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22, C23, C24 +30 |
| 17 | 240R | new-abdullah:IPC-SMD-R-0402 | R1, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46 +1 |
| 14 | TEST_POINT | new-abdullah:TP-40th-Without-Silkscreen | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 |
| 11 | 10k | new-abdullah:IPC-SMD-R-0402 | R2, R3, R4, R9, R10, R11, R25, R27, R28, R30, R31 |
| 7 | 22uF | new-abdullah:IPC-SMD-C-0603 | C4, C35, C39, C40, C51, C65, C69 |
| 6 | 10uF | new-abdullah:IPC-SMD-C-0805 | C15, C71, C74, C76, C78, C80 |
| 6 | 10uF | new-abdullah:IPC-SMD-C-0402 | C6, C41, C44, C46, C59, C70 |
| 5 | 100nF | new-abdullah:IPC-SMD-C-0805 | C63, C64, C73, C75, C79 |
| 5 | 18pF | new-abdullah:IPC-SMD-C-0402 | C47, C48, C49, C50, C62 |
| 4 | 1k5 | new-abdullah:IPC-SMD-R-0603 | R6, R7, R24, R47 |
| 4 | SCREW | new-abdullah:M3-Screw-Front | MS1, MS2, MS3, MS4 |
| 3 | 220uF | new-abdullah:ELKO-DIA-6.5mm-PS-2.54mm | C72, C77, C81 |
| 2 | 10R | new-abdullah:IPC-SMD-R-0402 | R16, R22 |
| 2 | 10k | new-abdullah:IPC-SMD-R-0603 | R12, R13 |
| 2 | 10uH | new-abdullah:Inductor-SMD-FPI0403S-100M | L1, L3 |
| 2 | 1k | new-abdullah:IPC-SMD-R-0805 | R17, R18 |
| 2 | 1uF | new-abdullah:IPC-SMD-C-0603 | C3, C5 |
| 2 | 2k49 | new-abdullah:IPC-SMD-R-0603 | R20, R21 |
| 2 | DS1095-WNR0 | new-abdullah:Connector-USB-A-Female-DS1095-WNR0 | P4, P5 |
| 2 | TPS56x200 | new-abdullah:IPC-SOT-23-6 | U7, U8 |
| 1 | 10R | new-abdullah:IPC-SMD-R-0805 | R23 |
| 1 | 10uF | new-abdullah:IPC-SMD-C-1206 | C67 |
| 1 | 33k2 | new-abdullah:IPC-SMD-R-0402 | R26 |
| 1 | 4.7uH | new-abdullah:IPC-SMD-R-0805 | L2 |
| 1 | 470R | new-abdullah:IPC-SMD-R-0402 | R5 |
| 1 | 47352-1001 | new-abdullah:Connector-uSD-Molex-47352-1001 | P1 |
| 1 | 6k49 | new-abdullah:IPC-SMD-R-0603 | R19 |
| 1 | 78L05 | new-abdullah:TO92 | U6 |
| 1 | 7k68 | new-abdullah:IPC-SMD-R-0402 | R29 |
| 1 | ATSAMD10D13 | new-abdullah:IPC-SOIC-20 | U9 |
| 1 | BAT54T1G | new-abdullah:IPC-SOD-123 | D1 |
| 1 | Connector-RJ45-J1B1211CCD | new-abdullah:Connector-RJ45-J1B1211CCD | P2 |
| 1 | DP83825 | new-abdullah:IPC-WQFN-24 | U4 |
| 1 | ECSPI4 | new-abdullah:Connector-Male-Breakaway-7pins | P10 |
| 1 | ES1D | new-abdullah:IPC-DO-214AC(SMA) | D2 |
| 1 | F60C1A0004-M79R | new-abdullah:BGA96C80P9X16_1400X800X120 | U2 |
| 1 | FC-135 32.7680KA-E3 | new-abdullah:CRYSTAL-EPSON-FC-135 | X2 |
| 1 | GPIO2 | abdullah:Connector-Male-Breakaway-2pins | P11 |
| 1 | I2S | abdullah:Connector-Male-Breakaway-5pins | P9 |
| 1 | LCD-40 | new-abdullah:Connector-SMD-ZIF-40-pin | P3 |
| 1 | LED | new-abdullah:IPC-SMD-LED-0805 | D3 |
| 1 | LOGO | LOGO | G*** |
| 1 | POWER IN | new-abdullah:Connector-DG127-5.08-02P | P6 |
| 1 | SWD Programmer | new-abdullah:TC2030-IDC-NL-FP-6-pin | P12 |
| 1 | TPS61169 | new-abdullah:IPC-SC-70-5 | U5 |
| 1 | UART1 | abdullah:Connector-Male-Breakaway-4pins | P7 |
| 1 | UART3 | abdullah:Connector-Male-Breakaway-5pins | P8 |
| 1 | X1E0000210065 | new-abdullah:XTAL-SMD-3.2mm-2.5mm | X1 |
| 1 | iMX6ULL | new-abdullah:BGA289C80P17X17_1400X1400X132N | U1 |
Similar boards
- 2 layers150 × 100 mm
- 2 layers99.1 × 99.1 mm
Vent
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve
113 parts5 - 4 layers86 × 34 mm
Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 4 layers121.9 × 44.4 mm
- 2 layers26.6 × 14.9 mm
- 6 layers76 × 78 mm
- 4 layers138 × 93.2 mm
Chroma pixel zeta
rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application
190 parts
Questions
How big is the IMX6ULL tryout PCB?
It measures 100 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IMX6ULL tryout use?
223 parts, built around the ATSAMD10D13A-MN, TPS61169DCK, 78L05 and F60C1A0004-M79R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IMX6ULL tryout KiCad files?
From the cebrax/iMX6ULL_tryout repository on GitHub, at the commit this page was made from: the board is imx6ull_tryout/imx6ull_tryout.kicad_pcb and its schematic imx6ull_tryout/ETHERNET.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IMX6ULL tryout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).