4 layers55 × 55 mm
Overview
The ES1D is a diodes Rectifiers Fast Recovery made by MDD in a SMA(DO-214AC) package with 2 pins. -55℃~+150℃ 1 Independent 1A 1V@1A 200V 35ns 5uA@200V SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 287,865 are in stock at JLCPCB (part C445494). 29 open-source boards in 23 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
5- Reverse voltage, most
- 200 V · Maximum repetitive peak reverse voltage · p. 1
- Forward current, most
- 1 A · Maximum average forward rectified current at TL=55 C · p. 1
- Forward voltage
- 950 mV · Maximum instantaneous forward voltage at 1.0A · p. 1
- Junction to air (DO-214AC/SMA)
- 60 K/W · Typical junction to ambient thermal resistance, PCB mounted with 5.0x5.0mm copper pad areas · p. 1
- Junction, hottest
- 150 °C · Maximum operating junction temperature · p. 1
What it is and has
3- Package
- DO-214AC/SMA · p. 1
- Junction
- Glass passivated chip junction · p. 1
- Polarity marking
- Color band denotes cathode end · p. 1
Specifications
12| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum repetitive peak reverse voltage VRRM | ES1D; ratings at 25 C ambient temperature unless otherwise specified | max 200 VOLTS | 1 |
| Maximum RMS voltage VRMS | ES1D | max 140 VOLTS | 1 |
| Maximum DC blocking voltage VDC | ES1D | max 200 VOLTS | 1 |
| Maximum average forward rectified current I(AV) | ES1D; at TL=55 C; single phase half-wave 60Hz, resistive or inductive load; for capacitive load current derate by 20% | max 1 Amp | 1 |
| Peak forward surge current IFSM | ES1D; 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | max 30 Amps | 1 |
| Maximum instantaneous forward voltage at 1.0A VF | ES1D; at 1.0A | max 0.95 Volts | 1 |
| Maximum DC reverse current at rated DC blocking voltage IR | ES1D; TA=25 C | max 5 uA | 1 |
| Maximum DC reverse current at rated DC blocking voltage IR | ES1D; TA=100 C | max 50 uA | 1 |
| Maximum reverse recovery time trr | ES1D; IF=0.5A, IR=1.0A, Irr=0.25A | max 35 ns | 1 |
| Typical junction capacitance CJ | ES1D; measured at 1MHz and applied reverse voltage of 4.0V D.C. | typ 15 pF | 1 |
| Typical thermal resistance RθJA | ES1D; DO-214AC/SMA; P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas | typ 60 C/W | 1 |
| Operating junction and storage temperature range TJ,TSTG | ES1D | min -50 · max 150 C | 1 |
Parameters
15- Current - Rectified
- 1A
- Diode Configuration
- 1 Independent
- Forward Current(If)
- 1A
- Forward Voltage (Vf@If)
- 950mV@1A
- Junction Temperature(Max)
- 150℃
- Operating Junction Temperature Range
- -55℃~+150℃
- Operating Temperature
- -55℃~+150℃@(Tvj)
- Reverse Leakage Current
- 5μA@200V
- Reverse Leakage Current (Ir)
- 5uA@200V
- Reverse Recovery Time (trr)
- 35ns
- Reverse Voltage
- 200V
- Thermal Resistance(Junction to Ambient)
- 60℃/W
- Voltage - DC Reverse(Vr)
- 200V
- Voltage - Forward(Vf)
- 950mV
- Voltage - Forward(Vf@If)
- 1V@1A
Order codes
2- ES1DLCSC C13829
- ES1DLCSC C445494
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | K | Passive |
| 2 | A | Passive |
Open-source boards using it
All 29- 2 layers38.2 × 37.9 mm
NixieSupply5vto160vDCMBoost
drkmsmithjr/NixiePowerSupply
170v Nixie Tube Power Supply from 5v Supply
47 parts98MIT - 4 layers80 × 60 mm
- 2 layers168.8 × 95.8 mm
- 4 layers100 × 75 mm
- 2 layers319.7 × 58.4 mm
- 2 layers99.1 × 99.1 mm
Vent
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve
113 parts5 - 4 layers182.5 × 62 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/mdd/ES1D" title="ES1D in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/mdd/ES1D.jpg" alt="ES1D" width="1200" height="900">[](https://pcbkit.io/parts/mdd/ES1D)Questions
Is there a KiCad symbol and footprint for the ES1D?
Yes. The symbol is Device:D and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ES1D?
SMA(DO-214AC), with 2 pins. Its footprint is drawn on this page.
Where is the ES1D datasheet?
MDD publishes it: the Datasheet link on this page opens it.
Where can I order the ES1D?
JLCPCB lists it as part C445494, with 287,865 in stock; the sellers' links on this page open their listings.
What can replace the ES1D?
Parts like it in the library: the ES1J by MDD, the RS1G by MDD, the US1G by MDD and the US1J-A by FMS. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ES1D?
29 boards in 23 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
ES1J
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1.7V@1A 1A 35ns 5uA@600V 600V SMA Fast Recovery / High Efficiency Diodes ROHSMDDDiodes Rectifiers Fast RecoveryRS1G
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1.3V@1A 150ns 1A 30A 400V 5uA@400V SMA Fast Recovery / High Efficiency Diodes ROHSMDDDiodes Rectifiers Fast RecoveryUS1G
SMA,DO-214AC-55℃~+150℃ 1 Independent 1.3V@1A 1A 30A 400V 50uA 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDDiodes Rectifiers Fast RecoveryUS1J-A
DO-214AC(SMA)1.7V@1A 1A 600V 75ns DO-214AC(SMA) Fast Recovery / High Efficiency Diodes ROHSFMSDiodes Rectifiers Fast RecoveryES1D
SMA,DO-214AC1A 200V 35ns 920mV@1A SMA Fast Recovery / High Efficiency Diodes ROHSYenji ElecDiodes Rectifiers Fast RecoveryES1J
SMA,DO-214AC1.7V@1A 1A 35ns 600V SMA Fast Recovery / High Efficiency Diodes ROHSYenji ElecDiodes Rectifiers Fast RecoveryRS1M
SMA,DO-214AC1.3V@1A 1A 1kV 500ns SMA Fast Recovery / High Efficiency Diodes ROHSYenji ElecDiodes Rectifiers Fast RecoveryUS1M
SMA,DO-214AC1.7V@1A 1A 1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSYenji ElecDiodes Rectifiers Fast Recovery