Skip to the content
PCBKitNew board
2 layers99.1 × 99.1 mmVent, the printed circuit board in 3D

A Simple, Open-Source Ventilator using a Proportional Solenoid Valve

Size
99.1 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
113
Nets
120
Pads
437
Tracks, vias
1,510, 229
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 May 2020
Updated
4 May 2020

Overview

Vent is an open-source printed circuit board by pandemiaplan, from the pandemiaplan/OP-Vent repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 113 parts on 120 nets, routed with 1,510 tracks and 229 vias.

It is built around the ATMEGA1284P-AU, CP2102N-A01-GQFN24 and LMV358, with the MAX3232ID, MPXV5010GP and NBPMANN150PGUNV among its other parts. Its parts include 26 capacitors, 24 resistors, 18 connectors, 17 ICs and 6 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

11

README

README.md

OP-Vent

A Simple, Open-Source Ventilator using a Proportional Solenoid Valve

Information gathered from https://op-vent.stanford.edu/ check it out! Article about information at https://www.engadget.com/nvidia-open-source-ventilator-design-165732445.html

Video Introduction

OP-Vent Video Introduction

Parts

113
QtyValueFootprintReferences
17100nFCapacitor_SMD:C_0805_2012MetricC3, C4, C5, C10, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23 +1
610kResistor_SMD:R_0805_2012MetricR9, R12, R14, R18, R20, R22
4330Resistor_SMD:R_0805_2012MetricR2, R5, R6, R7
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
32.2KResistor_SMD:R_0805_2012MetricR1, R3, R4
3470pFCapacitor_SMD:C_0805_2012MetricC24, C25, C26
35.1kResistor_SMD:R_0805_2012MetricR17, R19, R21
3LEDDiode_SMD:D_0805_2012MetricD2, D3, D4
210uFCapacitor_SMD:C_0805_2012MetricC7, C16
21uFCapacitor_SMD:C_0805_2012MetricC8, C9
2220kResistor_SMD:R_0805_2012MetricR8, R13
24.7uFCapacitor_SMD:C_0805_2012MetricC1, C2
2ES1DDiode_SMD:D_SMAD5, D6
2MCP6N11Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU10, U14
2MP3V5010GPSensor_Pressure:NXP_Pressure_SensorU5, U11
1100kResistor_SMD:R_0805_2012MetricR11
110k 0.1%Resistor_SMD:R_0805_2012MetricR16
110k 1%Resistor_SMD:R_0805_2012MetricR24
110uHInductor_SMD:L_0805_2012MetricL1
126.4K 1%Resistor_SMD:R_0805_2012MetricR23
12SMPP-03Sensor_Pressure:2SMPPU13
1330kResistor_SMD:R_0805_2012MetricR10
135.7k 0.1%Resistor_SMD:R_0805_2012MetricR15
178L05Package_TO_SOT_SMD:SOT-223-3_TabPin2U16
178M33Package_TO_SOT_SMD:SOT-223-3_TabPin2U15
1ATmega1284P-AUPackage_QFP:TQFP-44_10x10mm_P0.8mmU2
1BattConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ4
1CMI-1295IC-0385TBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1CP2102N-A01-GQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU1
1D_SchottkyDiode_SMD:D_SOD-323D1
1Func_SelDigiKey:Rotary_Encoder_Switched_EN11EN1
1G5V-1Relay_THT:Relay_SPDT_Omron_G5V-1K1
1HoneywellConnector_JST:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_VerticalJ8
1I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1LEDsConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ16
1LMV358Package_SO:SO-8_3.9x4.9mm_P1.27mmU12
1LP1_3P3VJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP7
1LP1_5VJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP6
1LP2_3P3VJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP9
1LP2_5VJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP8
1MAX3232Package_SO:TSSOP-16_4.4x5mm_P0.65mmU4
1MC24CM02Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1MCP9700AT-ETTPackage_TO_SOT_SMD:SOT-23U6
1MPXV5010GPSensor_Pressure:NXP_Pressure_SensorU9
1MX10GPDigiKey:SIP-4_W3.81mmU17
1NBPMANN150PGUNVSensor_Pressure:Honeywell_NBPU7
1P12VConnector:JWT_A3963_1x02_P3.96mm_VerticalJ18
1P12V_Horiz_FrontConnector_BarrelJack:BarrelJack_CUI_PJ-036AH-SMT_HorizontalJ11
1P12V_Vert_BackConnector_BarrelJack:BarrelJack_CUI_PJ006AJ17
1PMV20XNEPackage_TO_SOT_SMD:SOT-23Q1
1Parm_SelDigiKey:Rotary_Encoder_Switched_EN11EN2
1PowerJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP10
1ProgramConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ3
1RS232Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ9
1RS232Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP3
1RS232BJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP2
1RS232BConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10
1RelayConnector_JST:JST_VH_B3P-VH_1x03_P3.96mm_VerticalJ15
1ResonatorCrystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mmY1
1SW_SPDTDigiKey:Toggle_Switch_100SP1T1B4M2QESW1
1Serial 3.3VConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1SiargoConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ7
1Siargo SerialJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP4
1Sol1Connector:JWT_A3963_1x02_P3.96mm_VerticalJ12
1Sol2Connector:JWT_A3963_1x02_P3.96mm_VerticalJ13
1Sol3Connector:JWT_A3963_1x02_P3.96mm_VerticalJ14
1Test & SpareConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical_SMDJ6
1ULN2003Package_SO:TSSOP-16_4.4x5mm_P0.65mmU8
1USBJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP5
1USB Power JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1USB_B_MiniConnector_USB:USB_Mini-B_Lumberg_2486_01_HorizontalJ1

Questions

How big is the Vent PCB?

It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vent use?

113 parts, built around the ATMEGA1284P-AU, CP2102N-A01-GQFN24, LMV358 and MAX3232ID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vent KiCad files?

From the pandemiaplan/OP-Vent repository on GitHub, at the commit this page was made from: the board is OPVentPCB_V2.2/SRC/Vent.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vent design in my own project?

Its repository states no licence, so its author keeps all rights: ask pandemiaplan before reusing the design.

Similar boards

  • 2 layersPiCam PCB, the printed circuit board in 3D

    PiCam PCB

    MilesCoMedia/PiCam

    PiCam is an affordable, and easy to setup dashcam system that can be run on any Raspberry Pi and a Raspberry Pi-compatible camera.

    6 parts2Apache-2.0
  • 4 layers70.9 × 71.2 mmFrameGuard, the printed circuit board in 3D

    FrameGuard

    ahmeda-42/FrameGuard

    FrameGuard PCB - Bike Theft Deterrent

    43 parts
  • 2 layers101.1 × 70.8 mmProjektElektronikaV6, the printed circuit board in 3D

    ProjektElektronikaV6

    Nom27/Projekt-elektronika

    Projekt elektroniczny (schemat + PCB) inteligentnego termostatu opartego na mikrokontrolerze STM32, z łącznością WiFi (moduł ESP-12E), pomiarem temperatury czujnikiem LM335AZ, sygnalizacją dźwiękową (buzzer) oraz…

    42 parts
  • 2 layersDigsax1, the printed circuit board in 3D

    Digsax1

    Setok24/Digital-Saxophone

    this is just a copy

    55 parts
  • 2 layers105.4 × 215.6 mmMIDI Sax, the printed circuit board in 3D

    MIDI Sax

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    75 parts915
  • 2 layers30 × 28 mmDirectPressureSensor 2.0, the printed circuit board in 3D

    DirectPressureSensor 2.0

    artur-erik/Manikin_Hardware

    Sensors and SensorHub PCB Modules. Based on RA4E2

    13 parts
  • 4 layers100 × 75 mmIMX6ULL tryout, the printed circuit board in 3D

    IMX6ULL tryout

    cebrax/iMX6ULL_tryout

    iMX6ULL development board

    223 parts8GPL-3.0
  • 2 layers85.7 × 85.7 mmAttiny85 time switch, the printed circuit board in 3D

    Attiny85 time switch

    UCSIG/attiny85_time_switch

    Low-power time switch using the ATtiny85 microcontroller.

    32 parts1MIT