

Esper v1
Esp32 based eurorack module.
- Size
- 80.8 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 75
- Pads
- 299
- Tracks, vias
- 457, 311
- Pours
- 232
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Aug 2025
- Updated
- 6 Oct 2025
Overview
Esper v1 is an open-source printed circuit board by Antonio-Ciociola, from the Antonio-Ciociola/esper repository on GitHub. It is a 2-layer board of 80.8 × 99.1 mm with 82 parts on 75 nets, routed with 457 tracks and 311 vias.
It is built around the ADS8688IDB, TL072 and ME6211C33M5G-N, with the PCM5102APW, SMF16A and BAT43 among its other parts. Its parts include 35 capacitors, 13 resistors, 11 connectors, 7 diodes and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
7ADS8688IDB
TSSOP-38-40℃~+125℃ 0.75LSB 10.24V 12mA 16 17MHz 4.75V~5.25V 500kHz 6ppm/℃ 8 92dB Built-in No SAR SPI Support TSSOP-38 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeSMF16A
SOD-123FL-65℃~+150℃ 17V 19.7V 1uA 200W 26V 7.2A@10/1000us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)BAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesB340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdEsper
An esp32 based eurorack module.

Specifications
- 8HP width
- 4 CV inputs
- 2 Audio Outputs
- Oled Display with LVGL GUI
- Rotary Encoder with Push Button
- Esp32s3 has 2 cores, Bluetooth and Wifi support
Photos

Future Plans and Issues
- Better alternative to external adc for cv inputs
- Codec chip for both audio in and out, to allow for audio processing
- The esp32s3 floating point performance is not great
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Library:C_0603_1608Metric | C13, C21, C24, C30, C31, C32, C34 |
| 6 | 10k | Library:R_0603_1608Metric | R1, R2, R3, R4, R7, R8 |
| 6 | 1n | Library:C_0603_1608Metric | C6, C7, C15, C16, C17, C18 |
| 5 | 10u | Library:C_0603_1608Metric | C19, C23, C25, C27, C28 |
| 4 | 10u | Library:CP_Radial_D5.0mm_P2.50mm | C11, C12, C14, C26 |
| 4 | SMF16A | Library:D_SMF | D1, D2, D3, D4 |
| 3 | 1u | Library:C_0603_1608Metric | C20, C22, C29 |
| 3 | BLM18R | Library:L_0603_1608Metric | FB1, FB2, FB3 |
| 2 | 0.1u | Library:C_0603_1608Metric | C4, C5 |
| 2 | 10nF | Library:C_0603_1608Metric | C1, C2 |
| 2 | 1k | Library:R_0603_1608Metric | R11, R12 |
| 2 | 2.2k | Library:R_0603_1608Metric | R5, R6 |
| 2 | 2.2u | Library:C_0603_1608Metric | C33, C35 |
| 2 | 33k | Library:R_0603_1608Metric | R9, R10 |
| 2 | BAT43 | Library:D_SOD-123 | D6, D7 |
| 2 | LOGO | Library:Sonic | G***, G*** |
| 2 | M3 | Library:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | _10p | Library:C_0603_1608Metric | C8, C9 |
| 1 | 220n | Library:C_0603_1608Metric | C10 |
| 1 | ADS8688 | Library:TSSOP-38_4.4x9.7mm_P0.5mm | U4 |
| 1 | B340A | Library:D_SMA | D5 |
| 1 | Conn_02x08_Odd_Even | Library:IDC-Header_2x08_P2.54mm_Vertical | J11 |
| 1 | Dac1 | Library:Jack | J9 |
| 1 | Dac2 | Library:Jack | J10 |
| 1 | ESP32_S3_zero | Library:Esp32-S3 Zero | U2 |
| 1 | In1 | Library:Jack | J5 |
| 1 | In2 | Library:Jack | J6 |
| 1 | In3 | Library:Jack | J7 |
| 1 | In4 | Library:Jack | J8 |
| 1 | LM78M05_TO252 | Library:TO-252-3_TabPin2 | U3 |
| 1 | ME6211C33M5 | Library:SOT-23-5 | U5 |
| 1 | PCM5102A | Library:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | RotaryEncoder_Switch_MP | Library:RotaryEncoder_Switch | SW1 |
| 1 | SSD1306 | Library:128x64OLED | Brd1 |
| 1 | SolderJumper_3_Open | Library:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | TL072 | Library:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | _ | Library:R_0603_1608Metric | R13 |
| 1 | _10pF | Library:C_0603_1608Metric | C3 |
| 1 | c_In_Con | Library:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | c_Out_Con | Library:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | m_Out_Con | Library:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | m_in_Con | Library:PinSocket_1x09_P2.54mm_Vertical | J2 |
More from Antonio-Ciociola/esper
2- 2 layers39.6 × 99.1 mm

- 2 layers39.6 × 99.1 mm

Similar boards
- 2 layers112 × 57 mm

Caravansensor
MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.
226 parts17 - 4 layers85 × 50 mm

- 2 layers156.5 × 145.5 mm

- 4 layers58.9 × 48.4 mm

Apppd
chithigun23/ANUFS-APPPD
An update to the Accelerator Pedal Position Plausibility Device to remain compliant with the use of a paddle shift system.
103 parts - 4 layers285 × 94.6 mm

- 2 layers51.5 × 63 mm

Sensor Reader V4
Inverated/Proa-II-Electrical-Setup
Complete electical design and microcontroller code
70 parts - 4 layers200 × 130 mm

HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
110 parts - 4 layers58.2 × 74.6 mm

ESP-32-DSP board
MarkusVLA/Suunnattava-suuntamikrofoni
Suunnattava suuntamikrofoni on laite, jolla voidaan elektronisesti ohjata äänityksen suuntaa käännettävän suuntauksen avulla.
85 parts
Questions
How big is the Esper v1 PCB?
It measures 80.8 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esper v1 use?
82 parts, built around the ADS8688IDB, TL072, ME6211C33M5G-N and PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esper v1 KiCad files?
From the Antonio-Ciociola/esper repository on GitHub, at the commit this page was made from: the board is pcb/esper_v1/esper_v1.kicad_pcb and its schematic pcb/esper_v1/Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esper v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Antonio-Ciociola before reusing the design.