Skip to the content
2 layers156.5 × 145.5 mmPDB 2.0, the printed circuit board in 3D

-

Size
156.5 × 145.5 mm
Copper layers
2
Thickness
1.74 mm
Parts
89
Nets
55
Pads
296
Tracks, vias
405, 188
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Oct 2026
Updated
5 Nov 2026

Overview

PDB 2.0 is an open-source printed circuit board by ailakshmeesha01-coder, from the ailakshmeesha01-coder/PDB_HW_FILES repository on GitHub. It is a 2-layer board of 156.5 × 145.5 mm with 89 parts on 55 nets, routed with 405 tracks and 188 vias.

It is built around the TPSI3050QDWZRQ1, IPB017N10N5ATMA1 and 74HC74D, with the SN74HC08D, SN74HC14DR(LX) and SS310 among its other parts. Its parts include 30 resistors, 21 capacitors, 15 connectors, 12 ICs and 8 diodes.

Main components

11

README

README.md

PDB Hardware Files

KiCad hardware design files for the NEXUS Power Distribution Board (PDB) V2.0. The board takes power from a 12S battery (50.4 V max) and distributes it to the humanoid's actuators through 12 XT60 outputs. It precharges the bus, discharges it when powered off, and has a charging input.

Status: schematic complete, PCB routed, Gerbers and BOM generated.

Repository contents

File / folderDescription
PDB_2.0.kicad_proKiCad project file (open this one)
PDB_2.0.kicad_schSchematic
PDB_2.0.kicad_pcbPCB layout (2 layers, 4 oz copper)
PDB_2.0_BOM.xlsxBill of materials
PDB_2.0 Gerber files.zipGerber and drill files for fabrication
NEXUS_PDB_V2_power_simulation.pdfPower copper simulation report (current and temperature)
fp-lib-table, sym-lib-tableProject footprint and symbol library tables
Libraries/Symbols, footprints and 3D models used by the project

Work done

  • Schematic: full wiring with ERC; precharge, discharge and charging circuits; precharge and charging indicator LEDs added; C21 increased to 1 µF for a reliable power-on reset.
  • PCB layout: placement, routing and branding; power tracks widened; solid copper pours on the power nets.
  • Main current path: fixed the via bottleneck between the top-layer MOSFETs and the bottom-layer pours. Added a solid BUS+ pour on F.Cu and more vias on the MOSFET drain and source sides; removed stacked duplicate vias.
  • Connectors: fixed the XT30 footprint mismatch; added the QS8-S battery connector (J13) and XT90 footprints to Libraries/.
  • Assembly: thermal relief on small SMD GND pads for easier hand soldering; large power pads stay solid.
  • Simulation: checked the power copper at 100 A continuous and 300 A pulses (see the PDF).
  • Outputs: Gerbers, 3D models and BOM generated.
  • Project: files renamed from PDC_new to PDB_2.0; libraries moved into Libraries/.

Simulation results (summary)

  • 100 A continuous works with a small fan (~1 m/s airflow): peak rise about +36 K. In still air the hottest spots reach about +65 K, which is too hot in a warm enclosure.
  • 300 A pulses of up to ~20 ms are fine (≤ +22 K extra). Avoid 300 A for longer than ~50 ms.
  • Hottest areas: MOSFET tabs (U14 most), the J13 battery input, and a narrow BATT+ neck on the bottom layer.

Open items

  • U4A run latch: check that it is clocked from TIMEOUT with D = PC_DONE, so the board can't get stuck in precharge-only mode.
  • Fuses: F1 and F4 must be rated for ≥ 58 V DC. Size F1 to the real peak current.
  • Overvoltage: set the ODrive regen limits and overvoltage trip (or add a brake chopper) to keep BUS+ at or below 50.4 V.
  • Cooling: plan for airflow across the board if it will run near 100 A continuously.

Getting started

Requires KiCad 10.0 or newer.

bash
git clone https://github.com/ailakshmeesha01-coder/PDB_HW_FILES.git

Open PDB_2.0.kicad_pro in KiCad. Libraries in Libraries/ load automatically through ${KIPRJMOD}.

Contributing

  • Save and close KiCad before committing.
  • Lock files, backups, local history and *.kicad_prl are excluded by .gitignore.
  • Put new symbols and footprints in Libraries/.
  • Use clear commit messages, e.g. sch: fix U4A latch or pcb: widen BATT+ neck.

Parts

89
QtyValueFootprintReferences
12Conn_01x02_PinConnector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_HorizontalJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J14, J15
910kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R11, R12, R13, R21, R22, R23, R25, R26
510Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R14, R15, R16, R17
5100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC18, C22, C23, C25, C26
41Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P30.48mmR1_A1, R1_A2, R1_A3, R1_A4
41000uF/100VCapacitor_THT:CP_Radial_D18.0mm_P7.50mmC1, C2, C3, C4
4IPB017N10N5ATMA1ul_IPB017N10N5ATMA1:IPB017N10N5ATMA1_INFU6, U11, U12, U14
3LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4, D6, D8
2100uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC5, C6
21µFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9, C16
220kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR18, R20
222kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7, R8
2470nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11
2SS310Diode_SMD:D_SMAD1, D3
2TPSI3050QDWZRQ1ul_TPSI3050QDWZRQ1:DWZ0008A-MFGU1, U2
10.47 µFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC19
11 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21
1100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR31
1100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR27
110nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17
1150kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
1158kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
11MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24
11N4148WDiode_SMD:D_SOD-123D5
12.2 µFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20
12kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR19
13.3kResistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P30.48mmR5
13568-15Fuse:Fuseholder_Blade_Mini_Keystone_3568F4
14.7 µFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC13
14.7µFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC12
147kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3
1500kPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
174HC74Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU4
1Conn_01x02_PinQS8_S_Connectors:QS8-S-M_Vertical_DirectCupJ13
1Conn_01x02_PinConnector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_HorizontalJ12
1IRF540NSTRLPBFIRF540NSTRLPBF:TRANS_IRF540NSTRLPBFQ2
1LM393LVDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU10
1SMCJ54ASMCJ54A:DIOM6859X262ND2
1SMF16ADiode_SMD:D_SOD-123FD7
1SN74HC08DSN74HC08D:SOIC127P600X175-14NU8
1SN74HC14DRPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU9
1TLC555CDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU7
1URB4805LD-60WR3URB4805LD-60WR3:URB48_LD-60WR3U5
1XT90PW(2+2)-M.G.YXT90PW(2+2)-M.G.Y:CONN-TH_XT90PW2X2-MGYJ11

Similar boards

  • 4 layers972.2 × 655 mmLifeSequencer, the printed circuit board in 3D

    LifeSequencer

    acastles91/lifeSequencer

    569 parts
  • 2 layersEBS logic SMD, the printed circuit board in 3D

    EBS logic SMD

    PUT-Motorsport/PUTM_DV_EBS_control

    15 parts
  • 2 layers94 × 48.1 mmDaanmem esp32 board FO2DABBFD842, the printed circuit board in 3D

    Daanmem esp32 board FO2DABBFD842

    manhoosbilli1/smart-peltier-driver-esp32-v1

    Smart Peltier driver, ESP32 (v1 - v2 in active development)

    89 parts
  • 4 layers75.3 × 58.9 mmTritonECU, the printed circuit board in 3D

    TritonECU

    alpauna/TritonECU

    ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry

    83 parts10
  • 4 layers170 × 74.5 mmSupply power, the printed circuit board in 3D

    Supply power

    GarryBGoode/VibeSupply

    USB PD based powersupply developed on vibes (claude)

    253 parts
  • 6 layers46 × 46 mmTercio B1, the printed circuit board in 3D

    Tercio B1

    Kerol-Dev/Tercio-B1

    Tercio B1 brushless FOC driver (planning)

    163 partsApache-2.0
  • 4 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    183 parts

Questions

How big is the PDB 2.0 PCB?

It measures 156.5 × 145.5 mm and has 2 copper layers, 1.74 mm thick.

What parts does the PDB 2.0 use?

89 parts, built around the TPSI3050QDWZRQ1, IPB017N10N5ATMA1, 74HC74D and SN74HC08D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PDB 2.0 KiCad files?

From the ailakshmeesha01-coder/PDB_HW_FILES repository on GitHub, at the commit this page was made from: the board is PDB_2.0.kicad_pcb and its schematic PDB_2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PDB 2.0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ailakshmeesha01-coder before reusing the design.