
Lipo drainer schematic
mattwach/battery_drainer
Hardware to safely discharge LIPO batteries to storage levels
Boards in 28 GitHub repositories, designed in KiCad, that use the TPS70933DBVR-MS by MSKSEMI (SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TPS70933DBVR-MS’s symbol, footprint and pinout are on its own page.

mattwach/battery_drainer
Hardware to safely discharge LIPO batteries to storage levels

Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.

Tinkerforge/evse-bricklet
This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger

iamdarshg/drone-arm
Reworked cheaper, maybe faster but less redundant drone controller.

peteEH/remote-temp-msp430-rs422
Remote Temperature Sensor Node - TMP10 - RS-422 or RS-485 based - MSP430G2553

Wild-Spy/OSTBoardHardware
Hardware design for the Open Source Timer board.

chirauki/open-rally-remote
Open-source Bluetooth handlebar remote for motorcycle navigation and roadbooks. Compact, rugged, and designed for anyone to build.

dan-stefanov/locatof-hw
Open-source localization project based on UWB Time-of-Flight ranging

Harshavar8jdm/USB-PD-Power-Supply
A 4-layer custom printed circuit board designed around the WCH CH224A USB Power Delivery sink controller. This board requests discrete voltage profiles from 5V up to 28V (USB PD 3.0 / 3.1 EPR) at power levels up to…

JocoPippo/nrf_FanFrigo
progetto per il controllo delle ventole frigo con controllo via bluethooth basato su NRF52832 della nordic semiconductor e basato su Zephyr O.S.

juicebox6030/Nova-Link
NOVA-LINK is an open, low-latency wireless communication protocol and firmware stack designed for use in real-time live event environments.

Kraad25/USB-C-Advanced-Power-Supply
USB-C PD trigger board (CH224A) — KiCad schematic and PCB layout, selectable 5/9/12/20/28V output


nickyandre/MINEFIELD-BLE-MODULE-PCB-v1.0
This repository is for MINEFIELD BLE Module PCB v1.0 which consist of NRF52840 BLE chip and BME280 temperature, humidity, and air pressure sensor.

nmatic00/kicad-usbc-pd-psu
Based on Robert Feranec design. USB-C PD power supply based on CH224K sink controller

PFMRLIB/Surtr-LM
Precision Reference with 10.5V/1.05V Output Based on LM399/ADR1399

slonket/c92-decoder
An MM1/MM2/Lenz decoder for classic Märklin locomotives and the pre-mfx digital systems.


tangles-0/cyberdeck-scout
// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

tangles-0/cyberdeck-scout
// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.


MSTRocketDesignTeam/Liquid-Engine-Controller
Evolution of the RDT's Custom Liquid Engine Control Unit!