2 layers30 × 31.3 mm
Wild Spy Open Source Timer 3ch 16mm coin REV0
Wild-Spy/OSTBoardHardware
Hardware design for the Open Source Timer board.
60 parts1Apache-2.0
2 layers30 × 32.8 mm
Wild Spy Open Source Timer
Wild-Spy/OSTBoardHardware1Hardware design for the Open Source Timer board.
- Size
- 30 × 32.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 54
- Pads
- 220
- Tracks, vias
- 499, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Apr 2017
- Updated
- 13 Aug 2017
Overview
Wild Spy Open Source Timer is an open-source printed circuit board by Wild-Spy, from the Wild-Spy/OSTBoardHardware repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30 × 32.8 mm with 88 parts on 54 nets, routed with 499 tracks and 41 vias.
It is built around the ATSAMD21E16B-MU, UM6K33NTN and DS3232SN#T&R, with the TPS70933DBVR-MS, AO3415 and BSH103 among its other parts. Its parts include 12 resistors, 7 capacitors, 7 transistors, 5 ICs and 2 switches. It belongs with the SAM D and SAM boards of this library.
Main components
7
ATSAMD21E16B-MU
QFN-32-EP(5x5)-40℃~+85℃ 1.62V~3.6V 10bit 12bit 26 32 Bit 48MHz 64KB 8KB ARM Cortex-M0+ Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
UM6K33NTN
SOT-363-55℃~+150℃ 150mW 1V 2 N-Channel 2.2Ω@4.5V 200mA 25pF 3pF 50V 9pF SOT-363 MOSFETs ROHSROHM SemiconductorMOSFETs
DS3232SN#T&R
SO-20-300mil-40℃~+85℃ 100nA 2.3V~5.5V 200uA Built-in I2C Temperature compensation、Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output、Alarm function Yes SO-20-300mil Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
TPS70933DBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorised
AO3415
SOT-23-55℃~+150℃ 1 P-Channel 1.2W 1.45nF 160pF 17.2nC@4.5V 1V 205pF 20V 4A 50mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETsBSH103
SOT-23-55℃~+150℃ 1 N-channel 1.2V 14.8pF 146pF 30V 36.6pF 360mW 5.2nC@4.5V 650mΩ@2.5V 850mA SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdParts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | AO3415 | OSTFootprints:SOT-23-HandSoldering | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100k | Resistors_SMD:R_0603_HandSoldering | R4, R5, R6, R7, R12 |
| 4 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4 |
| 4 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | CH1, CH2, CH3, CH4 |
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R8 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R9, R11 |
| 2 | UM6K33N | OSTFootprints:SC88(SOT363) | U3, U4 |
| 1 | 150k | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C6 |
| 1 | 2k | Resistors_SMD:R_0603_HandSoldering | R10 |
| 1 | ATSAMD21E16B | OSTFootprints:QFN-32-1EP_5x5mm_Pitch0.5mm | U5 |
| 1 | BSH103 | OSTFootprints:SOT-23-HandSoldering | Q7 |
| 1 | CL10A105KB8NNNC | Capacitors_SMD:C_0805 | C5 |
| 1 | CL10B225KQ8NFNC | Capacitors_SMD:C_0603 | C8 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | Battery1 |
| 1 | CONN_01X04 | OSTFootprints:Pin_Header_Straight_1x04_Pitch2.54mm | PBus1 |
| 1 | CONN_01X05 | OSTFootprints:SWD_PROG_HEADER_L | SWD1 |
| 1 | DS3232SN | OSTFootprints:SOIC-20_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | JUMPER3 | OSTFootprints:SOLDER-JUMPER_2-WAY | JP1 |
| 1 | LED | OSTFootprints:LED_0603 | D1 |
| 1 | LOGO | WS_LOGO:WS_logo_6 | G*** |
| 1 | ORD213 | OSTFootprints:ORD213S-1 | SW2 |
| 1 | SW_PUSH | OSTFootprints:KMT071NGJLHS_3x2.6mm_switch | SW1 |
| 1 | Symbol_OSHW-Logo_SilkScreen | Symbols:Symbol_OSHW-Logo_SilkScreen | |
| 1 | TPS70933DBVR | OSTFootprints:SOT-23-5_HandSoldering | U2 |
| 1 | micro_USB | OSTFootprints:micro_USB | USB1 |
The 45 most common of 88 parts.
More from Wild-Spy/OSTBoardHardware
1Similar boards
- 4 layers68.6 × 52.1 mm
Roadrunner
jakeson21/Roadrunner-TM4C123G
Arduino clone based on TI's TM4C123G, an ARM M4F running at 80 MHz.
104 parts3GPL-3.0 - 2 layers22.5 × 21 mm
- 2 layers91.2 × 56.1 mm
- 8 layers150 × 160 mm
V3a scattered
Infinionist/krt-timiq-trial
KiCadRoutingTools placement trial on the CERN TimIQ RF board: raw working material
458 parts - 4 layers26 × 26 mm
- 4 layers65 × 61 mm
Serberus
suddenabnormalsecrets/Serberus
Multi-headed and Multi-Protocol embedded system hacking tool.
108 partsApache-2.0 - 2 layers98 × 56 mm
Thermal pcb
Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera
68 parts59MIT - 2 layers182.6 × 130.9 mm
Blackmacro base
KipJM/blackmacro-hardware
An open source, smaller, more configurable, and more capabable video editing keyboard based on the raspberry Pi Pico 2W.
189 parts29CERN-OHL-W-2.0
Questions
How big is the Wild Spy Open Source Timer PCB?
It measures 30 × 32.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wild Spy Open Source Timer use?
88 parts, built around the ATSAMD21E16B-MU, UM6K33NTN, DS3232SN#T&R and TPS70933DBVR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wild Spy Open Source Timer KiCad files?
From the Wild-Spy/OSTBoardHardware repository on GitHub, at the commit this page was made from: the board is Wild Spy Open Source Timer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wild Spy Open Source Timer design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).