Skip to the content
HDR-TH_3P-P2.54-L7.6-W2.5

JUMPER3

Würth ElektronikExtended

HDR-TH-3P-2.54mm New Arrivals ROHS

Part id
wurth/JUMPER3
Category
Uncategorised
Package
HDR-TH_3P-P2.54-L7.6-W2.5
Pins
3
In stock
0 at JLCPCB (C2940050)
Used on
133 open-source boards

Overview

The JUMPER3 is an uncategorised made by Würth Elektronik in a HDR-TH_3P-P2.54-L7.6-W2.5 package with 3 pins. HDR-TH-3P-2.54mm New Arrivals ROHS.

PCBKit's library has its KiCad symbol (freetronics_schematic:JUMPER3, from Freetronics), ready for a KiCad board. JLCPCB lists it (part C2940050). 133 open-source boards in 101 repositories on GitHub use it.

Symbol

123
freetronics_schematic:JUMPER3From Freetronics

Footprint

The library has no footprint for this part yet.

Pinout

3
The pins of the JUMPER3
PinNameType
11Passive
22Passive
33Passive

Open-source boards using it

133See all 133
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers49 × 49 mmOSBMS Balancer Rev 0.9, the printed circuit board in 3D

    OSBMS Balancer Rev 0.9

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    76 parts248
  • 4 layers137 × 86 mmCIAA K60, the printed circuit board in 3D

    CIAA K60

    ciaa/Hardware

    Hardware de la CIAA

    467 parts216
  • 2 layers100 × 90 mmRiser, the printed circuit board in 3D

    Riser

    zeldin/iceGDROM

    An FPGA based GDROM emulator for the Sega Dreamcast

    29 parts173GPL-3.0
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers86 × 54 mmD50mram, the printed circuit board in 3D

    D50mram

    dojoe/roland-mram-card

    A multi-bank MRAM based memory card for Roland instruments

    44 parts75
  • 2 layers54.4 × 43.2 mmReprom, the printed circuit board in 3D

    Reprom

    hbekel/reprom64

    rom replacement board for the C64

    21 parts34GPL-2.0
  • 2 layers146.1 × 53.3 mmWatersens, the printed circuit board in 3D

    Watersens

    whitebox-labs/tentacle

    An arduino shield to host and individually isolate up to 4 Atlas Scientific sensor circuits. Measure pH, conductivity, dissolved oxygen, ORP, temperature

    77 parts32

Questions

Is there a KiCad symbol and footprint for the JUMPER3?

Yes. The symbol is freetronics_schematic:JUMPER3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the JUMPER3?

HDR-TH_3P-P2.54-L7.6-W2.5, with 3 pins.

Where can I order the JUMPER3?

JLCPCB lists it as part C2940050, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the JUMPER3?

133 boards in 101 repositories on GitHub; the most starred are listed on this page, with their KiCad files.