
Out
Infinionist/krt-timiq-trial
KiCadRoutingTools placement trial on the CERN TimIQ RF board: raw working material

KiCadRoutingTools placement trial on the CERN TimIQ RF board: raw working material
V3a scattered is an open-source printed circuit board by Infinionist, from the Infinionist/krt-timiq-trial repository on GitHub. It is an 8-layer board of 150 × 160 mm with 458 parts on 414 nets.
It is built around the GP2Y+, LT1012ACS8#PBF and PMA2-43LN+, with the SIM-73L+, GAT-5+ and HMC1097LP4E among its other parts. Its parts include 201 capacitors, 165 resistors, 42 ICs, 14 inductors and 8 diodes. It belongs with the radio and wireless boards and the FPGA and CPLD boards of this library.
A placement trial of KiCadRoutingTools (KRT) v0.23.7 (commit db056e03) on the CERN TimIQ RF board. @edgehero suggested the board. The work was done by a designer (Infinionist) driving Claude Code. The board has 465 parts, 8 layers, 6 shield cans (J7-J12) and sits in a Hammond 1590Q lid.
This is raw working material, not a polished report. Point your own model at it.
Start with notes/timiq.md, then runs/v6/REPORT.md.
v6 is the run done the skill's way: the model reads the schematic, gets the physical facts and the designer's intent, and runs the skill's rounds (3, 3 and 12 seeds). The earlier runs were our own scripted variants and show where our setup went wrong.
Board source (CERN open hardware): https://gitlab.com/ohwr/project/timiq/timiq-hw
notes/: feedback notes for KRT (timiq.md: gaps, workarounds, where we leaned on the human board,
results) and plans (PLAN.md, PLAN-v2.md).scripts/: small helper scripts shared by several runs.runs/run1/: first attempt, KRT's skill driven by Claude Opus with an empty design brief. 12 seeds, judge,
final board with 557 blocking nets after routing.runs/run2/: second attempt. Plan v2 (see notes/PLAN-v2.md), prompt, inputs, and the can/hole/membership work files.runs/v2/: placer-only variant with our KRT patch. Scripts, intent, seeds, renders, human-board render.runs/v3/: loose anchor zones per can, courtyards synthesized, flippable faces. All 12 seeds illegal
(our input bugs: a fixed LED in a hole keep-out, DAC bigger than its zone, overlapping zones). KRT flagged
them only after 4 h of placing.runs/v4/: tight power strip and cans placed inside fixed zones, 6 seeds of 42 min. All 6 illegal
(15-25 parts with no legal pose, mostly power). Our tiles were too tight.runs/v5/: holds seeds-run1 (v5-1: all 282 can members inside their can, not DONE: 76 proximity misses,
power entry split from regulators), seeds-v4, seeds-run2 and seeds (v5b: power as loose groups, ICs locked
on F; 3 seeds, all illegal, 7-9 parts with no legal pose). cmp/ has the human-board comparison renders
(human vs seed vs routed seed). movie/ has the 3D placement movie.runs/v6/: the skill as written. REPORT.md, final.kicad_pcb (+ .kicad_pro, final_intent.json),
groups.json, rounds r1/r2/r3 (seed reports, logs, judge files, renders, best board per round),
best_* renders, quick-route renders, movie_r1..r3/placed_3d.mp4, ledger.jsonl, start board, build scripts.
Round 3: 6 of 12 seeds legal with 0 floorplan errors, the first legal placement of this board. Kept seed 7:
buildable with BOX1 waivers, quick route 88 blocking (39 unrouted, 49 broken). Not DONE by the skill's table.runs/retest/: the #1457 retest (2026-10-30) at KRT main 8f0c7ef4 (v0.23.7), with the cans kept on the board as
cans[] rows. REPORT.md (the run's own report), compare.json (vs v6), final.kicad_pcb, intent.json, TimIQ_RF.design-brief.json (the six cans[] rows),
seed3_with_cans.mp4 (the kept seed, with the can walls drawn in by repro/add_cans.py), placed_3d.mp4
(make_movie as run), repro/ (wall check, board_score repro). 12 of 12 seeds legal; kept seed 3.s*_route/) were dropped except runs/v6/r3/s7_route..json reports and logs are all there.*.kicad_prl files and movie frame directories (placed_movie3d/) were dropped; the .mp4 files are kept.runs/v6/preflight_r1.txt was over 5 MB in the original; it keeps its first and last 300 lines only.Infinionist and home paths with ~.The runs say as much about our setup as about KRT. The cans were taken off the board as a workaround (KRT has no
way to place parts inside a fixed can). J7-J10 poses, can membership and hole clearances follow the human board.
See "Where we cheated or leaned on the human board" in notes/timiq.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 10nF-25V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C114, C115, C116, C117, C118, C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133 +26 |
| 36 | 10k-0.125W-1P-0603 | RCL_SMD:SOLEIL-0603 | R24, R26, R28, R109, R111, R113, R128, R132, R134, R136, R138, R140, R142, R144, R149, R151 +20 |
| 35 | 10uF-16V-10p-Ceramic-0805 | RCL_SMD:SOLEIL-0805 | C146, C147, C151, C152, C153, C154, C158, C159, C160, C161, C175, C176, C177, C180, C181, C182 +19 |
| 34 | 4K7-0.100W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R13, R22, R25, R133, R135, R137, R139, R141, R143, R145, R146, R147, R148, R150, R152, R153 +18 |
| 28 | 100pF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C16, C20, C23, C27, C28, C42, C43, C47, C48, C63, C101, C103, C105, C107, C108, C109 +12 |
| 22 | 1K-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R1, R2, R38, R39, R44, R45, R48, R49, R110, R112, R114, R125, R127, R129, R130, R131 +6 |
| 16 | 100nF-50V-10p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C2, C3, C7, C9, C11, C12, C13, C15, C24, C51, C52, C55, C56, C57, C58, C119 |
| 15 | 50R5-0.150W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R8, R10, R70, R71, R73, R74, R77, R82, R85, R92, R95, R100, R101, R108, R165 |
| 14 | 1uF-25V-10p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C5, C10, C33, C34, C37, C38, C120, C141, C142, C170, C171, C172, C173, C174 |
| 13 | 4.7uF-6.3V-10p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C14, C69, C71, C78, C79, C86, C87, C94, C95, C100, C102, C104, C106 |
| 12 | 10pF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C1, C4, C6, C8, C65, C66, C74, C75, C82, C83, C90, C91 |
| 9 | 1nF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C21, C67, C68, C76, C77, C84, C85, C92, C93 |
| 9 | TEST-22 | passives:SOLEIL-TEST-22 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 8 | D_3mm1 | holes:SOLEIL-D_3mm1 | FIX1, FIX2, FIX3, FIX4, FIX5, FIX6, FIX7, FIX8 |
| 8 | LG_M67K-G1J2-24 | LED:SOLEIL-M67K | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | 10uF-25V-10p-Ceramic-1210 | RCL_SMD:SOLEIL-1210 | C139, C140, C165, C166, C167, C168, C169 |
| 7 | BLM18AG102SN1D | RCL_SMD:SOLEIL-0603 | L1, L2, L3, L4, L5, L6, L7 |
| 6 | 100nF-50V-10p-Ceramic-0805 | RCL_SMD:SOLEIL-0805 | C148, C149, C150, C162, C163, C164 |
| 5 | 0R-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R15, R54, R55, R106, R107 |
| 5 | TPS7A4700 | QFP:SOLEIL-VQFN20 | U39, U40, U41, U42, U43 |
| 4 | 132430 | SMA_connectors:SOLEIL-SMA-132430 | J1, J2, J3, J4 |
| 4 | 22nF-50V-10p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C17, C19, C22, C25 |
| 4 | 330R-0.250W-1P-0603 | RCL_SMD:SOLEIL-0603 | R14, R17, R19, R23 |
| 4 | 976R-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R58, R59, R62, R64 |
| 4 | SN74LV4T125PWR | TSSOP:SOLEIL-TSSOP14-0.65 | U33, U35, U36, U37 |
| 3 | 100uF-16V-20p-Al-TypeE | RCL_SMD:SOLEIL-TYPEE | C143, C144, C145 |
| 3 | 10K-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R119, R120, R126 |
| 3 | 10R-0.125W-1P-0603 | RCL_SMD:SOLEIL-0603 | R11, R46, R47 |
| 3 | 10uF-16V-20p-Al-TypeB | RCL_SMD:SOLEIL-TYPEB | C155, C156, C157 |
| 3 | 10uF-6.3V-10p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C53, C54, C122 |
| 3 | 18R-0.250W-1P-0603 | RCL_SMD:SOLEIL-0603 | R16, R20, R21 |
| 3 | 1K5-0.125W-1P-0805 | RCL_SMD:SOLEIL-0805 | R154, R155, R163 |
| 3 | GP2Y+ | QFP:SOLEIL-DQ1225 | U3, U17, U25 |
| 3 | HMC705LP4E | QFP:SOLEIL-WQFN24 | U18, U19, U20 |
| 3 | NFM41PC155B1H3L | RCL_SMD:SOLEIL-NFM41P | L12, L13, L14 |
| 3 | SN75LVDT388ADBT | TSSOP:SOLEIL-TSSOP38-0.5 | U31, U32, U34 |
| 2 | 1.5nF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C112, C113 |
| 2 | 10M-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R121, R122 |
| 2 | 10nH-1.4A-2p-4.3GHz-0603 | RCL_SMD:SOLEIL-0603 | L8, L9 |
| 2 | 14K-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R117, R118 |
| 2 | 1K-0.125W-1P-0805 | RCL_SMD:SOLEIL-0805 | R160, R161 |
| 2 | 1K2-0.100W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R68, R69 |
| 2 | 1K5-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R66, R67 |
| 2 | 330pF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C110, C111 |
| 2 | 49R9-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R103, R105 |
| 2 | 4K02-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R56, R57 |
| 2 | 4K7-0.125W-1P-0805 | RCL_SMD:SOLEIL-0805 | R162, R164 |
| 2 | 4R7-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R9, R12 |
| 2 | 576R-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R60, R61 |
| 2 | 5K11-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R102, R104 |
| 2 | 62R-0.200W-1P-0603 | RCL_SMD:SOLEIL-0603 | R63, R65 |
| 2 | 7K5-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R115, R116 |
| 2 | 8.2nH-700mA-2p-4.2GHz-0603 | RCL_SMD:SOLEIL-0603 | L10, L11 |
| 2 | 88K7-0.166W-0.1P-0603 | RCL_SMD:SOLEIL-0603 | R123, R124 |
| 2 | LT1012ACS8 | SO:SOLEIL-SOIC8NB | U5, U6 |
| 2 | LT1360CS8 | SO:SOLEIL-SOIC8NB | U10, U11 |
| 2 | LT6600CS8-2.5 | SO:SOLEIL-SOIC8NB | U14, U15 |
| 2 | LTC2054HVCS5 | SOT23:SOLEIL-SOT23-5 | U7, U8 |
| 2 | LTC6655BHMS8-1.25 | MSOP:SOLEIL-MSOP8 | U12, U13 |
| 2 | PMA2-43LN+ | SO:SOLEIL-MC1631 | U21, U22 |
| 2 | SIM-73L+ | SO:SOLEIL-HV1195 | U26, U27 |
| 2 | TPS7A3301 | QFP:SOLEIL-VQFN20 | U44, U45 |
| 1 | 102K-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R157 |
| 1 | 105K-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R159 |
| 1 | 1590Q | passives:SOLEIL-1590Q | BOX1 |
| 1 | 1M24-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R158 |
| 1 | 2.2nF-50V-5p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C18 |
| 1 | 22uF-10V-20p-Ceramic-0603 | RCL_SMD:SOLEIL-0603 | C121 |
| 1 | 332K-0.100W-1P-0603 | RCL_SMD:SOLEIL-0603 | R156 |
| 1 | 39-30-1061 | PSU_connectors:SOLEIL-39-30-1061 | J6 |
| 1 | 820R-0.250W-1P-0603 | RCL_SMD:SOLEIL-0603 | R18 |
| 1 | ADS8694IDBT | TSSOP:SOLEIL-TSSOP38-0.5 | U29 |
| 1 | BSH103 | SOT23:SOLEIL-SOT23-3 | Q1 |
| 1 | CVHD-950M-108.3681 | OSC_SMD:SOLEIL-SMD9x14 | U2 |
| 1 | GAT-5+ | passives:SOLEIL-FG873 | U23 |
| 1 | HMC1097LP4E | QFP:SOLEIL-WQFN24 | U16 |
| 1 | LMX2541SQ2690E | QFP:SOLEIL-WQFN36 | U1 |
| 1 | LTC2758ACLX | QFP:SOLEIL-LQFP48 | U4 |
| 1 | LTC6241HVCS8 | SO:SOLEIL-SOIC8NB | U9 |
| 1 | LTC6655BHMS8-4.096 | MSOP:SOLEIL-MSOP8 | U30 |
The 454 most common of 458 parts.

bcancinov/4-channel-adc-module
4 Channel ADC module for detector controller prototype


Wild-Spy/OSTBoardHardware
Hardware design for the Open Source Timer board.

suddenabnormalsecrets/Serberus
Multi-headed and Multi-Protocol embedded system hacking tool.

loxodes/vna
Under development open hardware microwave vector network analyzer

es-ude/eeg-hardware
Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller


dubnubdubnub/Giris
open source 32 key/half (64 total) analog TMR split ortholinear keyboard w/ 8kHz USB HS
It measures 150 × 160 mm and has 8 copper layers, 1.19 mm thick.
458 parts, built around the GP2Y+, LT1012ACS8#PBF, PMA2-43LN+ and SIM-73L+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Infinionist/krt-timiq-trial repository on GitHub, at the commit this page was made from: the board is runs/v3/out/v3a_scattered/s6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Infinionist before reusing the design.