6 layers200 × 75 mm
Boards using the MMC5983MA
95 boardsBoards in 73 GitHub repositories, designed in KiCad, that use the MMC5983MA by MEMSIC (-40℃~+105℃ 18bit 2.8V~3.6V 450uA I2C、SPI ±8Gs ±8Gs LGA-16(3x3) 3D Magnetic Sensors ROHS). See how each wires it, with its parts, size, README and files; the MMC5983MA’s symbol, footprint and pinout are on its own page.
- 4 layers33 × 90 mm
Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers70.8 × 100 mm
- 4 layers47 × 21.6 mm
Rotini Hardware
AlfredoSystems/Rotini-Hardware
📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)
116 parts3MIT - 4 layers31 × 100 mm
Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 2 layers120 × 80 mm
MainBoard v1
shimotoriharuki/2021RoboTrace_Kicad
This repository contains circuit data for line-following robot (UnderBird).
166 parts3GPL-3.0 - 6 layers90 × 45 mm
Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 4 layers50 × 100 mm
- 4 layers92 × 88.9 mm
Cubesat obc
ephemeridis/cubesat_obc
A small CubeSat On-Board Computer with lots of processing headroom, utilizing a low power ARM Cortex M33 processor at its core.
311 parts2MIT - 6 layers100 × 37 mm
PickleRick
icl-rocketry/Ricardo-PickleRick
A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.
223 parts2MIT - 4 layers40 × 100 mm
NNCpro
PlanAndBuild/NoNameComputer-2.0
The NoNameComputer 2.0 AKA NNCpro is being designed for mid-high power rockets and other flying vehicle. It will be equipped with various sensors like barometers, IMUs, magnetometer, current sensing etc.
263 parts2 - 4 layers79 × 76.7 mm
- 4 layers88.4 × 62.4 mm
- 4 layers55 × 154.1 mm
GPS module
Dizzerin/Rocket-Flight-Data-Computer
This project uses an STM32H743VGT6 MCU along with some innertial measurement units (IMU)s and barometric pressure sensors to and an SD card to record flight data from a model rocket and for later analysis, graphing, and…
161 parts1 - 4 layers50 × 37 mm
- 4 layers54.5 × 18 mm
- 2 layers60 × 60 mm
- 8 layers
FIRM v1.1
NCSU-High-Powered-Rocketry-Club/FIRM-KiCad
Full and open hardware design for FIRM
108 parts1MIT - 4 layers60 × 84 mm
StratosCore Claude
pantojinho/StratosCore
StratosCore is an open-source portable field, aviation, meteorological, navigation and radio computer based on the ESP32-S3-WROOM-1-N16R8.
277 parts1 - 4 layers58.4 × 54 mm
- 6 layers50 × 50 mm
- 2 layers30.2 × 77.8 mm
- 2 layers76 × 74.9 mm
Low Power Instrument
ahoang205/--MagneticField---Acceleration-Sensors
Dự án thiết kế hệ thống phần cứng và phần mềm nhúng (Embedded IoT System) công suất thấp dùng để đo đạc, thu thập dữ liệu Từ Trường 3 Trục và Gia Tốc / Góc Quay 6 Trục, truyền dữ liệu đo từ xa qua mạng không dây Wi-Fi…
106 partsMIT - 6 layers29 × 29 mm
