Boards using the SS54

347 boards

Boards in 253 GitHub repositories, designed in KiCad, that use the SS54 by MDD (-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the SS54’s symbol, footprint and pinout are on its own page.

2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98
2 layers43 × 43 mm
TurboCAN
henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.
88 parts82
4 layers285.1 × 48.1 mm
Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0
4 layers106 × 63.5 mm
Brineomatic
hoeken/brineomatic
Open Source Watermaker Controller.
323 parts47LGPL-2.1
2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44
6 layers50 × 50 mm
Osc dev m007
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
100 parts39Apache-2.0
4 layers170.2 × 141.9 mm
[DFR1142]Lite Carrier for LattePanda Mu
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu
308 parts37MIT
2 layers49.1 × 49.1 mm
Roborock CPAP
jniebuhr/roborock-pcb
This repository contains a custom PCB for use with the awesome work at Roborock CPAP. The PCB shields the controller board from any back flow that might occur from the brushless controller.
31 parts34
2 layers40 × 80 mm
Splitflappcb
codingcatgirl/split-flap-fae-pcb
Alternative drop-in replacement PCB for David Kingsman's split-flap display
46 parts31Apache-2.0
6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30
2 layers76.8 × 23.5 mm
SommerESP
exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors
41 parts29MIT
2 layers182.6 × 130.9 mm
Blackmacro base
KipJM/blackmacro-hardware
An open source, smaller, more configurable, and more capabable video editing keyboard based on the raspberry Pi Pico 2W.
189 parts29CERN-OHL-W-2.0
4 layers105 × 55 mm
MotorKit
zhbi98/ODriveX
【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件，最高电压 60V 单通道电流可达 100A，可以驱动 1.2kW 以内 BLDC 或 PMSM（有中文注释）。
184 parts22MIT
2 layers262.5 × 107.9 mm
Econopet
DLehenbauer/econopet
Mainboard replacement for Commodore PET/CBM series machines
305 parts19CC0-1.0
4 layers91.7 × 66.8 mm
Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project
68 parts18GPL-3.0
2 layers68.5 × 84.2 mm
Am32stc8051u
Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…
110 parts17
2 layers140 × 90 mm
PicoIndustrial
feecat/PicoIndustrial
Industrial Control Module Based on RPI PICO
163 parts14GPL-3.0
4 layers105 × 30 mm
Better Klipper Expander
Fisheiyy/Better-Klipper-Expander
A RP2040 based 3D Printer Port Expander
95 parts14
4 layers100 × 100 mm
SDR TRX
frohro/SDR-TRX
SDR-TRX is an experimental low-cost digital mode ham radio HF transceiver.
141 parts14
4 layers144 × 127 mm
Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0
4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT
2 layers135 × 90 mm
Edgeberry
Edgeberry/Edgeberry-Baseboard
Edgeberry Base Board for Raspberry Pi model B
57 parts12CERN-OHL-W-2.0
4 layers170.2 × 170.2 mm
Nvme Carrier all M2
El-Luhb/nvme-Carrier-for-LattePanda-Mu
nvme Carrier PCB for the LattePanda Mu compute module
400 parts12MIT
2 layers80.9 × 92.7 mm
Evo Borne
SRA-VJTI/Evo-Borne
This repository focuses on building an open-source morphobot.
126 parts12MIT