Boards using the HC-05

74 boards

Boards in 65 GitHub repositories, designed in KiCad, that use the HC-05 by GENERIC (Bluetooth to Serial Port Module). See how each wires it, with its parts, size, README and files; the HC-05’s symbol, footprint and pinout are on its own page.

4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
2 layers100 × 100 mm
Main board V2
Resaj/cyclops-project
Robot de carreras open source con cámara
31 parts53
2 layers90.9 × 38.4 mm
Snaaur v1
duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.
58 parts7
2 layers56.8 × 68.6 mm
Emg
leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.
84 parts6MIT
2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0
2 layers33 × 58.8 mm
Fusion
chungyu710/Fusion
Capstone Design Project
36 parts4
4 layers160 × 117.5 mm
Daveecu2
miata-bot/daveecu2
Speeduino Mainboard designed for NA Maita chassis
249 parts3
2 layers
UltransonicHumidifier
anuj-dangi/iot-and-automation
Repo for IOT and automation projects
19 parts2
2 layers80 × 100 mm
Arduino v2.0
arlethmichellopez/Curso-de-KiCad
En esta sección integraré el diseño de las PCB's que cree durante el transcurso de mi curso en KiCad
101 parts2
2 layers114.7 × 86.2 mm
Project 2 PCB
Dygore/4013_Project2_Group2
Micro controller: Raspberry Pi Pico GPS: Adafruit Mini GPS PA1010D Radio: HC05 IMU: Adafruit BNO055 SD Card: HW-125 SPI Micro SD Board Battery: LP103454
22 parts2GPL-3.0
2 layers145 × 118 mm
M52
rusefi/hw_legacy
In this repo we archive rusEfi-related abandoned hardware files
230 parts2
2 layers150 × 47 mm
Line follower Fallout
ZIZO932/Line-follower-Bot
A line follower robot i built from scratch, schematic, PCB, and all. it uses an 8 channel sensor array to track the line and a PID loop to stay on it and handle sharp turns without freaking out.
23 parts2
2 layers70.9 × 41 mm
KeyboardSecurity
aykutozdemir/K810_Security
The compiled firmware will be placed in the .pio/build/promicro16/ directory.
28 parts1
2 layers82.7 × 56.6 mm
Kedtracker
doc22940/self.kedtracker.drone
Based on design by glidernet.org project: http://wiki.glidernet.org/ogn-tracker-diy.
86 parts1
2 layers
ELSUMOQUESUMA
eliasheila/eeeee-eee-e

15 parts1
2 layers
Velocimetro
julioflima/Controle-Tanque-de-Nivel
Projeto destinado a disciplina de Controle Analógico - Engenharia Elétrica - UFC
15 parts1MIT
2 layers
IKEA Samtid mood light
madworm/IKEA-Samtid_mood-light
LAYOUT FILES: Circular extension board for IKEA Samtid lamps.
146 parts1
2 layers148.1 × 86.8 mm
DiyMEFI
mattmon/diyMEFI

91 parts1
2 layers53 × 68 mm
In Board Gnia
MbFredys/PCB-designs-for-PLATZI-course
PCB design exercises completed during a structured training course, documenting schematic capture, layout, and manufacturing outputs.
99 parts1MIT
2 layers99.7 × 98.4 mm
Core
Salakorte/Robot-velocista
Robot velocista echo con Kikad
58 parts1
2 layers50 × 70 mm
Pcb01
sheffieldhackspace/balancing-bot
code and designs for the self-balancing robot
18 parts1GPL-3.0
2 layers130 × 119 mm
Velocista
zarattee/velocista
robot seguidor de linea
63 parts1
2 layers79.6 × 83.7 mm
Car
0529003/2023EC8T6
2024电赛训练题2023E
97 parts
2 layers68.6 × 53.3 mm
Autonomous PCB
adithyashok/Autonomous_Systems_Drone_PCB
PCB Design files for my Research lab
24 parts