
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition

Micro controller: Raspberry Pi Pico GPS: Adafruit Mini GPS PA1010D Radio: HC05 IMU: Adafruit BNO055 SD Card: HW-125 SPI Micro SD Board Battery: LP103454
Project 2 PCB is an open-source printed circuit board by Dygore, from the Dygore/4013_Project2_Group2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 114.7 × 86.2 mm with 22 parts on 57 nets, routed with 100 tracks and 3 vias.
It is built around the HC-05 and BNO055. Its parts include 5 ICs, 4 resistors, 4 diodes, 2 connectors and 1 transistor. It belongs with the RP2040 boards of this library.
This project is for Group 2's ECEN 4013 project 2, all of the code contained will be documented and cited if needed. The goal of this project is to create a circuit that can transmit IMU and GPS data through 3 means of communication (USB, UHF RF, and SD Card). This Github project will be used to store all of the code architecture, the details of the project are still being finalized and will be updated soon!
The current plan is to have two seperate circuits based on difficulty. The first circuit will be the main focus with the details contained below, the second circuit details have not been finalized yet.
Micro controller: Raspberry Pi Pico
GPS: Adafruit Mini GPS PA1010D
Radio: HC05
IMU: Adafruit BNO055
SD Card: HW-125 SPI Micro SD Board
Battery: LP103454
-https://microcontrollerslab.com/neo-6m-gps-module-raspberry-pi-pico-micropython/
Dylan Gore 10/24/2022
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4_Pad_TopBottom | H1, H2, H3 |
| 2 | D_Schottky | Diode_SMD:D_1206_3216Metric | D1, D2 |
| 1 | 180 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 60 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 800 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | BNO055 | MCU_RaspberryPi_and_Boards:BNO055 | U3 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Buzzer | KiCad:CMT8585397SMTTR | BZ1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | GT-U7 | MCU_RaspberryPi_and_Boards:GT-U7 | U4 |
| 1 | Green | LED_THT:LED_D5.0mm | D3 |
| 1 | HC-05 | MCU_RaspberryPi_and_Boards:HC-05 | U5 |
| 1 | HW-125 | MCU_RaspberryPi_and_Boards:HW-125 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | Red | LED_THT:LED_D5.0mm | D4 |
| 1 | SW_Reed | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | SW1 |

NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition


duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.

leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.

xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.



It measures 114.7 × 86.2 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the HC-05 and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dygore/4013_Project2_Group2 repository on GitHub, at the commit this page was made from: the board is PCB/Project_2_PCB.kicad_pcb and its schematic PCB/Project_2_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).