Skip to the content

Boards using the FD6288Q

24 boards

Boards in 18 GitHub repositories, designed in KiCad, that use the FD6288Q by Fortior Tech (-40℃~+125℃ 1.5A 1.8A 100ns 12ns 12ns 2.7V 3 300ns 330uA 5V~20V 800mV IGBT、MOSFET Three Phase Under Voltage Protection QFN-24-EP(4x4) Gate Drivers ROHS). See how each wires it, with its parts, size, README and files; the FD6288Q’s symbol, footprint and pinout are on its own page.

  • 4 layers63.1 × 63.5 mmAIO, the printed circuit board in 3D

    AIO

    ErBWs/CH32-Bike-Overland

    十八届智能车单车越野

    157 parts36GPL-3.0
  • 4 layers45.9 × 42.1 mmRoboMotor GIM6010, the printed circuit board in 3D

    RoboMotor GIM6010

    baoqi-zhong/RoboMotor

    A fully open-sourced motor controller project

    130 parts6MIT
  • 2 layers45.3 × 46.1 mmFd6288 stm32 ver1.0, the printed circuit board in 3D

    Fd6288 stm32 ver1.0

    bharathajay51/bldc_sensorlessDrive

    Development of a 3-Phase Brushless Motor Driver.

    64 parts4
  • 4 layers64.6 × 57.3 mmDragonfly, the printed circuit board in 3D

    Dragonfly

    Broccoliux/dragonfly

    A very cool, drone that can perform maneuvers.

    246 parts2MIT
  • 4 layers100 × 100 mmFOC driver, the printed circuit board in 3D

    FOC driver

    Froggy111/foosball-bot

    228 parts1
  • 6 layers46 × 55.8 mmF051-ESC-6L V1, the printed circuit board in 3D

    F051-ESC-6L V1

    jpwolfe9912/F051-ESC-6L-V1

    228 parts1
  • 4 layers20 × 50 mmPiESC S1 PCB20x50, the printed circuit board in 3D

    PiESC S1 PCB20x50

    CoPYGolF97/PiESC

    Open-source 3-phase BLDC ESC firmware and hardware for RP2350-based multirotor aircraft.

    28 partsGPL-3.0
  • 4 layers16.2 × 23.2 mmAART11, the printed circuit board in 3D

    AART11

    ImbaNagibator/slot-car-ecom

    This repo contains a KiCad design, documentation and ancillary artifacts for a slot car brushless motor electronic commutator or "eCom", also known as an Electronic Speed Controller (ESC).

    82 partsCC0-1.0
  • 4 layers46 × 47 mmSTMF051 Electric Speed controller, the printed circuit board in 3D

    STMF051 Electric Speed controller

    MatthiasGeorgImhof/STMF051_Electric_Speed_controller

    An ESC (electronic speed controller) and serveo breakout board using 8 PWM inputs lines (1&2 ESC, 3-8 servos 1-6)

    164 parts
  • 4 layers48.3 × 56.6 mm4 in 1 ESC, the printed circuit board in 3D

    4 in 1 ESC

    Triso01/FPV-Stack

    Making my own FPV Stack for Stardance (Hackclub)

    176 parts
  • 4 layers39 × 43 mmEsc, the printed circuit board in 3D

    Esc

    vili111111p/Self-made-drone

    206 parts
  • 4 layers76.9 × 70.3 mmSTC mainboard, the printed circuit board in 3D

    STC mainboard

    wargod1029/PCB-design

    Brief - Dual brushed motor driver board using BTS7960b half bridge IC. Designed for large power motor (24V, 15A)

    175 parts
  • 2 layersHalf bridge fd6288 v1.0, the printed circuit board in 3D

    Half bridge fd6288 v1.0

    bharathajay51/bldc_sensorlessDrive

    Development of a 3-Phase Brushless Motor Driver.

    60 parts4
  • 2 layersHalf bridge fd6288 v2.0, the printed circuit board in 3D

    Half bridge fd6288 v2.0

    bharathajay51/bldc_sensorlessDrive

    Development of a 3-Phase Brushless Motor Driver.

    48 parts4
  • 2 layers45.3 × 37.1 mmHalf bridge fd6288 v3.0, the printed circuit board in 3D

    Half bridge fd6288 v3.0

    bharathajay51/bldc_sensorlessDrive

    Development of a 3-Phase Brushless Motor Driver.

    48 parts4
  • 4 layers100 × 100 mmBLDC FOC, the printed circuit board in 3D

    BLDC FOC

    Froggy111/foosball-bot

    122 parts1
  • 2 layers14 × 21 mmFMESC-1-C, the printed circuit board in 3D

    FMESC-1-C

    apachecn/fm01

    胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.

    40 parts
  • 4 layers56.9 × 43.8 mmBHL S1 copied, the printed circuit board in 3D

    BHL S1 copied

    eluluke/Quadruped-Robot

    Open-source, 3D-printable, modular quadruped robot designed as a hardware platform for robotics education, controls development, kinematics, reinforcement learning, robotic vision, and future semi-commercial research…

    93 partsApache-2.0
  • 2 layers35 × 33 mmMalenki brushless, the printed circuit board in 3D

    Malenki brushless

    goktugh/robotbits

    Some bits for robots or other control applications

    36 parts
  • 4 layers21.9 × 39.2 mmESC, the printed circuit board in 3D

    ESC

    Triso01/FPV-Stack

    Making my own FPV Stack for Stardance (Hackclub)

    41 parts
  • 4 layers75.9 × 50.4 mmSTC ESC, the printed circuit board in 3D

    STC ESC

    wargod1029/PCB-design

    Brief - Dual brushed motor driver board using BTS7960b half bridge IC. Designed for large power motor (24V, 15A)

    80 parts