2 layers
Half bridge fd6288 v1.0
bharathajay51/bldc_sensorlessDrive
Development of a 3-Phase Brushless Motor Driver.
60 parts4
2 layers45.3 × 46.1 mm
Fd6288 stm32 ver1.0
bharathajay51/bldc_sensorlessDrive4Development of a 3-Phase Brushless Motor Driver.
- Size
- 45.3 × 46.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 65
- Pads
- 220
- Tracks, vias
- 523, 60
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Aug 2020
- Updated
- 18 Aug 2020
Overview
Fd6288 stm32 ver1.0 is an open-source printed circuit board by bharathajay51, from the bharathajay51/bldc_sensorlessDrive repository on GitHub. It is a 2-layer board of 45.3 × 46.1 mm with 64 parts on 65 nets, routed with 523 tracks and 60 vias.
It is built around the FD6288Q, MURA110T3 and AMS1117-3.3. Its parts include 24 capacitors, 20 resistors, 6 ICs, 6 transistors and 2 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
3
FD6288Q
QFN-24-EP(4x4)-40℃~+125℃ 1.5A 1.8A 100ns 12ns 12ns 2.7V 3 300ns 330uA 5V~20V 800mV IGBT、MOSFET Three Phase Under Voltage Protection QFN-24-EP(4x4) Gate Drivers ROHSFortior TechGate Drivers
MURA110T3
SMA(DO-214AC)-65℃~+175℃ 100V 2A 2uA 875mV@1A SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency Diodes
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdbldc_sensorlessDrive
Development of a 3-Phase Brushless Motor Driver.
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C10, C11, C12, C13, C15, C16, C17, C20 |
| 6 | 3.3 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R12, R13, R20, R21 |
| 6 | Q_NMOS_DGS | half_bridge_fd6288_v1:NTMS5C430 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C8, C9, C18 |
| 3 | 120K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R15, R18 |
| 3 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R16, R19 |
| 3 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R14, R17 |
| 3 | MURA110T3 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | U2, U3, U4 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C22, C24 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C21, C23 |
| 2 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R5 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 32k768 | Crystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering | X2 |
| 1 | 330uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C19 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | X1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BOOT0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | BOOT1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | FD6288 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PROG_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | PWR_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SWD |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
More from bharathajay51/bldc_sensorlessDrive
3- 2 layers
Half bridge fd6288 v2.0
bharathajay51/bldc_sensorlessDrive
Development of a 3-Phase Brushless Motor Driver.
48 parts4 - 2 layers45.3 × 37.1 mm
Half bridge fd6288 v3.0
bharathajay51/bldc_sensorlessDrive
Development of a 3-Phase Brushless Motor Driver.
48 parts4
Similar boards
- 4 layers64.6 × 57.3 mm
- 4 layers35 × 85 mm
Vimdrones esc development board
VimDrones/AM32_esc_development_board
Open Source AM32 ESC development board
95 parts44GPL-3.0 - 4 layers63.1 × 63.5 mm
- 4 layers46 × 55.8 mm
- 4 layers45.9 × 42.1 mm
- 4 layers100 × 100 mm
- 6 layers46 × 55.8 mm
- 4 layers20 × 50 mm
PiESC S1 PCB20x50
CoPYGolF97/PiESC
Open-source 3-phase BLDC ESC firmware and hardware for RP2350-based multirotor aircraft.
28 partsGPL-3.0
Questions
How big is the Fd6288 stm32 ver1.0 PCB?
It measures 45.3 × 46.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fd6288 stm32 ver1.0 use?
64 parts, built around the FD6288Q, MURA110T3 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fd6288 stm32 ver1.0 KiCad files?
From the bharathajay51/bldc_sensorlessDrive repository on GitHub, at the commit this page was made from: the board is hardware/fd6288_stm32_ver1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fd6288 stm32 ver1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bharathajay51 before reusing the design.