

FOC driver
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 228
- Nets
- 168
- Pads
- 786
- Tracks, vias
- 2,008, 509
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Nov 2024
- Updated
- 20 Nov 2025
Overview
FOC driver is an open-source printed circuit board by Froggy111, from the Froggy111/foosball-bot repository on GitHub. It is a 4-layer board of 100 × 100 mm with 228 parts on 168 nets, routed with 2,008 tracks and 509 vias.
It is built around the STM32G431RBT6, GS8557-TR and TCAN1057AVDRQ1, with the MX27517, AP63205WU and FD6288Q among its other parts. Its parts include 74 resistors, 68 capacitors, 22 connectors, 11 transistors and 7 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
12STM32G431RBT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 32KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)GS8557-TR
SOT-23-5-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.3mA 100dB 100pA 109mA 10pA 13MHz 2.5V~5.5V 27nV/℃ 5uV 8V/us EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHSGainsilPrecision Op AmpsTCAN1057AVDRQ1
SOIC-8-40℃~+150℃ 300uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversMX27517
SOT-23-6L-40℃~+125℃ 1 1.9V~2.3V 10ns 15ns 4A 4A 4V~18V 6ns 6ns 80uA 950mV~1.25V Enable shutdown、Interleaved conduction protection Low Side MOSFET SOT-23-6L Gate Drivers ROHSWuxi MaxinmicroGate DriversAP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersFD6288Q
QFN-24-EP(4x4)-40℃~+125℃ 1.5A 1.8A 100ns 12ns 12ns 2.7V 3 300ns 330uA 5V~20V 800mV IGBT、MOSFET Three Phase Under Voltage Protection QFN-24-EP(4x4) Gate Drivers ROHSFortior TechGate DriversMST8A50QA-15A1YD
QFN-20(5x5)1 150kHz 500uA 5A 9V~100V Adjustable Buck Built-in Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes QFN-20(5x5) DC-DC Converters ROHSMSTDC-DC ConvertersBSP48520AS
SOIC-8RS-485 / RS-422 ICsBORNB2B-XH-A
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorBSC093N15NS5
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 139W 150V 26pF 3.23nF 4.6V 40.7nC@10V 87A 9.3mΩ@10V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsBAT46W
SOD-123Schottky DiodeshongjiachengS2B-XH-A
弯插,P=2.5mm-25℃~+85℃ 1 11.5mm 1x2P 2 2.5mm 250V 2P 3A 6.1mm 7.4mm Brass K Pin PA66 Right Angle Tin UL94V-0 White XH 弯插,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdFoosball robot
Small simple foosball robot
Parts
228| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 100nF 50V | Capacitor_SMD:C_0402_1005Metric | C10, C11, C17, C18, C19, C20, C21, C24, C25, C26, C28, C33, C34, C35, C39, C40 +17 |
| 19 | 10K | Resistor_SMD:R_0402_1005Metric | R12, R15, R17, R20, R26, R29, R50, R55, R56, R57, R58, R59, R68, R69, R70, R71 +3 |
| 11 | 100 | Resistor_SMD:R_0402_1005Metric | R2, R37, R61, R62, R63, R64, R65, R66, R67, R75, R76 |
| 11 | BSP48520AS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | DIFF_DRV1, DIFF_DRV2, DIFF_DRV3, DIFF_DRV4, DIFF_RECV1, DIFF_RECV2, DIFF_RECV3, DIFF_RECV4, DIFF_RECV5, DIFF_RECV6, DIFF_RECV7 |
| 10 | 10 | Resistor_SMD:R_0402_1005Metric | R13, R16, R18, R21, R27, R30, R38, R39, R40, R41 |
| 10 | 1uF 200V | Capacitor_SMD:C_1812_4532Metric | C5, C22, C23, C29, C30, C36, C37, C47, C48, C65 |
| 10 | B2B-XH-A | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3, J4, J5, J6, J17, J18, J19, J20, J21, J22 |
| 8 | PinHeader 1x1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | 10K 1% | Resistor_SMD:R_0402_1005Metric | R42, R43, R44, R45, R46, R47, R48 |
| 7 | 10uF 25V | Capacitor_SMD:C_0603_1608Metric | C7, C16, C66, C67, C68, C69, C71 |
| 6 | 1K 0.1% | Resistor_SMD:R_0402_1005Metric | R8, R9, R22, R23, R31, R32 |
| 6 | 60.4K 0.1% | Resistor_SMD:R_0402_1005Metric | R10, R11, R24, R25, R33, R34 |
| 6 | BSC093N15NS5 | EasyEDA:DFN-8_L5.5-W5.2-P1.27-LS6.1-BL | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 10pF | Capacitor_SMD:C_0402_1005Metric | C53, C54, C55, C56 |
| 4 | 40N05 | Package_TO_SOT_SMD:SOT-23 | Q8, Q9, Q10, Q11 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | MX27517 | Package_TO_SOT_SMD:SOT-23-6 | GDRV2, GDRV3, GDRV4, GDRV5 |
| 3 | 1m 3W | Resistor_SMD:R_2512_6332Metric | R14, R19, R28 |
| 3 | 1uF 16V | Capacitor_SMD:C_0402_1005Metric | C14, C15, C27 |
| 3 | 22uF 25V | Capacitor_SMD:C_0805_2012Metric | C12, C13, C51 |
| 3 | 820uF 100V (C443165) | Capacitor_THT:C_Radial_D18.0mm_H35.5mm_P7.50mm | C1, C2, C3 |
| 3 | C7420332 | Diode_SMD:D_SOD-123F | D1, D2, D3 |
| 3 | GS8557-TR | EasyEDA:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | OPAMP1, OPAMP2, OPAMP3 |
| 3 | S2B-XH-A | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J7, J14, J16 |
| 3 | S5B-XH-A | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J8, J13, J15 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R7 |
| 2 | 300 | Resistor_SMD:R_0402_1005Metric | R54, R60 |
| 2 | 43K | Resistor_SMD:R_0805_2012Metric | R1, R49 |
| 2 | 60.4 | Resistor_SMD:R_0402_1005Metric | R35, R36 |
| 2 | C965799 | LED_SMD:LED_0603_1608Metric | LED1, LED2 |
| 2 | S4B-XH-A | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J9, J10 |
| 1 | 10uF 35V | Capacitor_SMD:C_0603_1608Metric | C46 |
| 1 | 25m 1W | Resistor_SMD:R_1206_3216Metric | R51 |
| 1 | 3K | Resistor_SMD:R_0402_1005Metric | R53 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7nF 50V | Capacitor_SMD:C_0402_1005Metric | C41 |
| 1 | 43K | footprints:R_0805_2012Metric | R52 |
| 1 | 470uF 35V | Capacitor_SMD:CP_Elec_10x10.5 | C50 |
| 1 | 47pF 50V | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 47uF 100V | Capacitor_SMD:CP_Elec_10x10.5 | C38 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | BUCK2 |
| 1 | AZ1117EH-3.3TRG1 | EasyEDA:SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | LDO1 |
| 1 | C19674287 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C41384052 | EasyEDA:IND-SMD_L13.5-W12.6 | L1 |
| 1 | C48615 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | C76884 | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | DSHP04TSGER_C3293144 | EasyEDA:SW-SMD_8P-L6.7-W5.4-P1.27-LS8.4 | DIP1 |
| 1 | FD6288Q | Snapeda:FD6288Q_QFN50P400X400X90-25N | GDRV1 |
| 1 | HB9500-3 | EasyEDA:CONN-TH_3P-P9.50_HB9500-9.5-3P | J2 |
| 1 | HB9500M-9.5-2P | EasyEDA:CONN-TH_HB9500M-9.5-2P | J1 |
| 1 | JFC1032-2600FS | EasyEDA:FUSE-SMD_L10.3-W3.2 | F1 |
| 1 | MSK22D18G2 125 | EasyEDA:SW-TH_SHOU_MSK22D18G2 | SW2 |
| 1 | MST8A50QA-15A1Y | EasyEDA:QFN-20_L5.0-W5.0-P0.80-TL_HP8105QA | BUCK1 |
| 1 | MX74700T_C22468156 | EasyEDA:SOT-23-6_L2.9-W1.6-P0.95-LS2.9-BL | RPOL1 |
| 1 | S10B-XH-A | Connector_JST:JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal | J11 |
| 1 | S8B-XH-A | Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J12 |
| 1 | SL0420-4R7M | EasyEDA:IND-SMD_L4.5-W4.1_IHLP | L2 |
| 1 | SMAJ85CA | Diode_SMD:D_SMA | D4 |
| 1 | SP015N03BGHTO | EasyEDA:TOLL-8_L10.4-W9.9-P1.20-LS11.7-BL | Q7 |
| 1 | SS310FL | Diode_SMD:D_SMA | D5 |
| 1 | STM32G431RBT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | MCU1 |
| 1 | TCAN1057AVDRQ1 | EasyEDA:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | FDCAN_TSCV1 |
| 1 | TS-1088-AR02016 | EasyEDA:SW-SMD_L3.9-W3.0-P4.45 | SW1 |
More from Froggy111/foosball-bot
6- 4 layers100 × 100 mm

- 4 layers80 × 100 mm

- 2 layers43 × 38 mm

- 2 layers100 × 100 mm

- 2 layers50 × 50 mm

- 2 layers52 × 40 mm

Similar boards
- 2 layers76 × 92 mm

- 4 layers43.2 × 62 mm

USBAudioBridge
fsodari/USBAudioBridge
NXP RT1010 based USB to I2S bridge to connect to a Digilent Arty A7.
120 parts - 2 layers38.2 × 11.9 mm

- 2 layers88.3 × 106.8 mm

- 4 layers71.8 × 109.5 mm

MCC22
ZeniteSolar/MCC22
Follow the steps below, if any value differs from the expected, abort the test. Power off and on after each step. Always limit the power source to 18V at 100mA. Use this link to find components on the board.
245 parts1 - 2 layers149.9 × 86.4 mm

SensorBoard
aidangonzales/ECE-445M
This is a collection of all the labs that I did in ECE 445M- Real Time Operating Systems Lab.
76 parts - 4 layers72 × 55 mm

Exhaust mic
HasiKe/Exhaust-Mic
Motorcycle Exhaust and Intake Microphone for best soud on Videos.
135 parts - 2 layers135.4 × 53.3 mm

Battery monitoring board
thongthach/ASME
joined the ASME organization at UCLA to design, test, and solder hardware components for the submarine robot and the battlebot
76 parts
Questions
How big is the FOC driver PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.57 mm thick.
What parts does the FOC driver use?
228 parts, built around the STM32G431RBT6, GS8557-TR, TCAN1057AVDRQ1 and MX27517. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FOC driver KiCad files?
From the Froggy111/foosball-bot repository on GitHub, at the commit this page was made from: the board is v1/hardware/pcbs/FOC-driver/FOC-driver.kicad_pcb and its schematic v0/hardware/pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FOC driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Froggy111 before reusing the design.