
Control board
thongthach/ASME
joined the ASME organization at UCLA to design, test, and solder hardware components for the submarine robot and the battlebot

joined the ASME organization at UCLA to design, test, and solder hardware components for the submarine robot and the battlebot
Battery monitoring board is an open-source printed circuit board by thongthach, from the thongthach/ASME repository on GitHub. It is a 2-layer board of 135.4 × 53.3 mm with 76 parts on 55 nets, routed with 333 tracks and 30 vias.
It is built around the MAX31855KASA+T, S5B-XH-A and PN2222A. Its parts include 26 resistors, 11 capacitors, 10 connectors, 7 diodes and 3 ICs. It belongs with the power boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | A1, A2, A3, A4, B1, B2, B3, B4, cs_temp1, Leak1, Probe1, sck1, so1, TP1 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R9, R10, R11, R21, R23, R25, R28, R30 |
| 8 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C10, C11, C12, C13, C14 |
| 5 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J5, J6, J7, J8, J11 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R29 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R20 |
| 2 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R22 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R24 |
| 2 | Conn_01x05 | Library:1x5 Screw, 39970-0105 MOLEX | J1, J2 |
| 2 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4 |
| 2 | FerriteBead | Capacitor_SMD:C_0805_2012Metric | FB1, FB2 |
| 2 | Green LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D7 |
| 2 | S5B-XH-A | Library:JST_S5B-XH-A | J3, J9 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1N4007 | Diode_SMD:D_SMA | D6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 360 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | Conn_01x02 | Library:TE_282836-2 | J4 |
| 1 | ESP32-DEVKIT-V1 | Library:MODULE_ESP32_DEVKIT_V1 | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP1804x-A002xOT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | P-Channel | PCM_Package_TO_SOT_SMD_AKL:SOT-23 | Q1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92 | Q2 |

thongthach/ASME
joined the ASME organization at UCLA to design, test, and solder hardware components for the submarine robot and the battlebot


HasiKe/Exhaust-Mic
Motorcycle Exhaust and Intake Microphone for best soud on Videos.


rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴


voltlog/Voltlogger
More info about this project in Voltlog #368. If you would like to order one of these boards ready assembled, check out my Tindie store.

walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.

It measures 135.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the MAX31855KASA+T, S5B-XH-A and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thongthach/ASME repository on GitHub, at the commit this page was made from: the board is battery_monitoring_designPCB/pcb/battery monitoring board.kicad_pcb and its schematic battery_monitoring_designPCB/schematic/battery monitoring board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thongthach before reusing the design.