

Esp32-s2 with separate heatbed
PCB based SMD reflow plates
- Size
- 65.5 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 65
- Pads
- 203
- Tracks, vias
- 337, 66
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Mar 2022
- Updated
- 8 Nov 2023
Overview
Esp32-s2 with separate heatbed is an open-source printed circuit board by Johboh, from the Johboh/Solder-Reflow-Plate repository on GitHub, published under the MIT licence. It is a 2-layer board of 65.5 × 50 mm with 58 parts on 65 nets, routed with 337 tracks and 66 vias.
It is built around the ESP32-S2FN4R2, MAX31855KASA+T and ESDL4151MX4T5G-TP, with the RKC2SJF170SMTR LFS, TB003-500-P02BE and BZT52C24-E3-08 among its other parts. Its parts include 22 capacitors, 12 resistors, 6 diodes, 5 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S2FN4R2
QFN-56-EP(7x7)-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 2.8V~3.6V 310mA 63mA ESP32-S2 Chip UART、SPI、I2C、I2S、USB QFN-56-EP(7x7) WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX31855KASA+T
SO-8-40℃~+125℃ 14 1500uA 3V~3.6V Built-in temperature sensor SPI Thermocouple-to-Digital Converter SO-8 ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADCs/DACs - Special PurposeESDL4151MX4T5G-TP
DFN1006-2ESD And Surge Protection (TVS/ESD)TECH PUBLICRKC2SJF170SMTR LFS
SMD-4P,3.5x2.7mm-40℃~+85℃ 1.7mm 100,000 cycles 12V 2.7mm 20mA 3.5mm 5N J-Lead Rectangular Button SPST-NO Surface Mount,Vertical SMD-4P,3.5x2.7mm Tactile Switches ROHSC&KTactile SwitchesTB003-500-P02BE
插件,P=5mmScrew Terminal BlocksCUIBZT52C24-E3-08
SOD-1231 Independent 100nA@18V 22.8V~25.2V 220Ω 24V 300mW 70Ω ±5% SOD-123 Zener Diodes ROHSVishay IntertechnologyZener DiodesECS-400-15-33B-CTN-TR
SMD3225-4P-40℃~+85℃ 15pF 40MHz 40Ω ±10ppm ±20ppm SMD3225-4P Crystals ROHSECSCrystalsPJ-037B
--25℃~+85℃ 2.5A 2.5mm 24V 6.3mm DC Power Jack Right Angle - DC Power Connectors ROHSCUIDC Power ConnectorsPJD25N06A_L2_00001
TO-252MOSFETsPANJIT International
README
README.mdSolder Reflow Plate - ESP32-S2 version with separate heatbed
Forked from AfterEarthLTD/Solder-Reflow-Plate! See upsteam for original Readme.md and documentation!
Join Discord for discussion and project updates.
Originally by AfterEarth Ltd
Versions in this repo
- 80mm x 60mm & 95mm x 95mm
- 12VDC (5A Minimum)
- 5.5mm x 2.5mm Barrel Jack
- ESP32-S2
Disclaimer
We are dealing with heat and high current here. Use at your own risk! Don't leave solder plate unattended.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C8, C14, C15, C17, C18, C19, C20, C22 |
| 4 | , , , | ||
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R10 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11, C16, C21 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C10 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C9, C12 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R6, R9 |
| 2 | D | Diode_SMD:D_SOD-123 | D2, D4 |
| 2 | ESDL4151MX4T5G | library_manager:ESDL4151MX4T5G | D1, D5 |
| 2 | LED | Diode_SMD:D_0603_1608Metric | D3, D6 |
| 2 | RKC2SJF170SMTR_LFS | library_manager:RKC2SJF170SMTRLFS | S1, S2 |
| 2 | TB003-500-P02BE | library_manager:SHDR2W100P0X500_1X2_1000X780X1030P | J3, J4 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 2108832-1 | library_manager:21088321 | ANT1 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 865080545012 | library_manager:CAPAE660X770N | C1 |
| 1 | ? | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | BZT52C24-E3-08 | library_manager:BZT52C24E308 | Z1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ECS-400-15-33B-CTN-TR | library_manager:ECS2501033BCKMTR | Y1 |
| 1 | ESP32-S2FN4R2 | library_manager:QFN40P700X700X90-57N-D | IC1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PJ-037B | library_manager:PJ037B | J1 |
| 1 | PJD25N06A_L2_00001 | library_manager:PJD25N06A_L2_00001 | Q1 |
| 1 | USB_C_Receptacle_USB2.0 | library_manager:TYPE-C-31-M-12 | J2 |
Similar boards
- 2 layers101.6 × 53.3 mm

- 2 layers62.7 × 44.4 mm

DRM Watch v3
drfailov/DRM_Watch_v3
DRM Watch 3 - Наручний годинник з дисплеєм SHARP Memory LCD
116 parts92GPL-3.0 - 2 layers89 × 112 mm

Elf fp
arhefner/elf_mc_fp
Front panel board for Lee Hart's 1802 Membership Card with Raspberry Pi interface
34 parts2MIT - 2 layers160 × 39 mm

RoscoFrontPanel
aowron/RoscoFrontPanelPcb
A frontpanel pcb I made for the rosco m68k computer
33 partsBSD-2-Clause - 4 layers17.8 × 20.7 mm

Qt py esp32-s2-assembled
d4vid-le/qt-py-esp32-s2-experiment
A personal, non-production experiment: reconstruct the Adafruit QT Py ESP32-S2 (Product 5325, Rev C) in KiCad from the authoritative Eagle source, measuring how accurately an AI agent can do it — and documenting every…
47 parts - 2 layers50.8 × 59.8 mm

- 2 layers152.1 × 36 mm

ESProbeScope3300
noahensley/kicad-probe-scope
A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an…
77 partsMIT - 2 layers26.5 × 60.5 mm

MBus to radio
Tobias0110/EVN_Kaifa_ESP_MQTT
Allows you to read the MBus data of a Kaifa smartmeter used by the EVN in Austria, decrypt the packages and send the values over MQTT.
27 parts2GPL-2.0
Questions
How big is the Esp32-s2 with separate heatbed PCB?
It measures 65.5 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-s2 with separate heatbed use?
58 parts, built around the ESP32-S2FN4R2, MAX31855KASA+T, ESDL4151MX4T5G-TP and RKC2SJF170SMTR LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-s2 with separate heatbed KiCad files?
From the Johboh/Solder-Reflow-Plate repository on GitHub, at the commit this page was made from: the board is KiCad/esp32-s2 with separate heatbed/esp32-s2 with separate heatbed.kicad_pcb and its schematic KiCad/esp32-s2 with separate heatbed/esp32-s2 with separate heatbed.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-s2 with separate heatbed design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).