Skip to the content
57

ESP32-S2FN4R2

Espressif SystemsExtended

-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 2.8V~3.6V 310mA 63mA ESP32-S2 Chip UART、SPI、I2C、I2S、USB QFN-56-EP(7x7) WiFi Modules ROHS

Part id
espressif/ESP32-S2FN4R2
Category
WiFi Modules
Package
QFN-56-EP(7x7)
Pins
57
In stock
694 at JLCPCB (C2844252)
Used on
4 open-source boards

Overview

The ESP32-S2FN4R2 is a wiFi Module made by Espressif Systems in a QFN-56-EP(7x7) package with 57 pins. -40℃~+85℃ -97dBm 19.5dBm 2.4GHz 2.8V~3.6V 310mA 63mA ESP32-S2 Chip UART、SPI、I2C、I2S、USB QFN-56-EP(7x7) WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (Espressif:ESP32-S2, from Espressif) and its footprint (Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm, from KiCad's library), ready for a KiCad board. 694 are in stock at JLCPCB (part C2844252). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1VDDA2LNA_IN/RF3VDD3P35GPIO0/BOOT6GPIO1/ADC1_CH07GPIO2/ADC1_CH18GPIO3/ADC1_CH29GPIO4/ADC1_CH310GPIO5/ADC1_CH411GPIO6/ADC1_CH512GPIO7/ADC1_CH613GPIO8/ADC1_CH714GPIO9/ADC1_CH815GPIO10/ADC1_CH916GPIO11/ADC2_CH017GPIO12/ADC2_CH118GPIO13/ADC2_CH219GPIO14/ADC2_CH320VDD3P3_RTC21GPIO15/ADC2_CH4/XTAL_32K_P22GPIO16/ADC2_CH5/XTAL_32K_N23GPIO17/ADC2_CH6/DAC_124GPIO18/ADC2_CH7/DAC_225GPIO19/ADC2_CH8/USB_D-26GPIO20/ADC2_CH9/USB_D+27VDD3P3_RTC_IO28GPIO2129SPI_CS1/GPIO2630VDD_SPI31SPIHD/GPIO2732SPIWP/GPIO2833SPICS0/GPIO2934SPICLK/GPIO3035SPIQ/GPIO3136SPID/GPIO3237GPIO3338GPIO3439GPIO3540GPIO3641GPIO3742GPIO3843MTCK/JTAG/GPIO3944MTDO/JTAG/GPIO4045VDD3P3_CPU46MTDI/JTAG/GPIO4147MTMS/JTAG/GPIO4248U0TXD/GPIO4349U0RXD/GPIO4450GPIO4552XTAL_N53XTAL_P55GPIO4656CHIP_PU/RESET57GND
Espressif:ESP32-S2From Espressif

Footprint

57
Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mmFrom KiCad's library

From the datasheet

12
Supply, least
2.8 V · VDDA, VDD3P3, VDD3P3_RTC, recommended operating, min · p. 35
Supply, most
3.6 V · VDDA, VDD3P3, VDD3P3_RTC, recommended operating, max · p. 35
Supply, least
1.8 V · VDD_SPI, input supply, recommended operating, min · p. 35
Supply, most
3.6 V · VDD_SPI, input supply, recommended operating, max · p. 35
Supply, least
3 V · VDD3P3_RTC_IO, recommended operating, min · p. 35
Supply, most
3.6 V · VDD3P3_RTC_IO, recommended operating, max · p. 35
Supply, least
2.8 V · VDD3P3_CPU, recommended operating, min · p. 35
Supply, most
3.6 V · VDD3P3_CPU, recommended operating, max; 3.3 V maximum when writing eFuse · p. 35
Supply, absolute maximum
3.6 V · VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SPI, VDD3P3_RTC_IO, absolute max · p. 35
Junction, hottest
125 °C · junction temperature, recommended operating, max · p. 35
Takes working
68 mA · RX, 802.11n, 40 MHz, CPU idle, peripherals off, 3.3 V, 25 °C, max (peak) · p. 37
Takes at most
310 mA · TX, 802.11b, 20 MHz, 1 Mbps, 19.5 dBm, 3.3 V, 25 °C, max (peak) · p. 37

Open-source boards using it

4
  • 2 layers62.7 × 44.4 mmDRM Watch v3, the printed circuit board in 3D

    DRM Watch v3

    drfailov/DRM_Watch_v3

    DRM Watch 3 - Наручний годинник з дисплеєм SHARP Memory LCD

    116 parts92GPL-3.0
  • 4 layers17.8 × 20.7 mmQt py esp32-s2-assembled, the printed circuit board in 3D

    Qt py esp32-s2-assembled

    d4vid-le/qt-py-esp32-s2-experiment

    A personal, non-production experiment: reconstruct the Adafruit QT Py ESP32-S2 (Product 5325, Rev C) in KiCad from the authoritative Eagle source, measuring how accurately an AI agent can do it — and documenting every…

    47 parts
  • 2 layers152.1 × 36 mmESProbeScope3300, the printed circuit board in 3D

    ESProbeScope3300

    noahensley/kicad-probe-scope

    A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an…

    77 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESP32-S2FN4R2?

Yes. The symbol is Espressif:ESP32-S2 and the footprint Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP32-S2FN4R2?

QFN-56-EP(7x7), with 57 pins. Its footprint is drawn on this page.

Where is the ESP32-S2FN4R2 datasheet?

Espressif Systems publishes it: the Datasheet link on this page opens it.

Where can I order the ESP32-S2FN4R2?

JLCPCB lists it as part C2844252, with 694 in stock; the sellers' links on this page open their listings.

What can replace the ESP32-S2FN4R2?

Parts like it in the library: the ESP32-S3FH4R2 by Espressif Systems, the ESP32-S2FH2 by Espressif Systems, the ESP32-S2R2 by Espressif Systems and the ESP32-WROOM-32E-N4 by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP32-S2FN4R2?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.