

MatrixLEDcontrol
kicad share data.
- Size
- 76 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 109
- Pads
- 341
- Tracks, vias
- 910, 62
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 May 2021
- Updated
- 9 Nov 2022
Overview
MatrixLEDcontrol is an open-source printed circuit board by hamayanShowa-ele, from the hamayanShowa-ele/kicad_share repository on GitHub. It is a 2-layer board of 76 × 92 mm with 53 parts on 109 nets, routed with 910 tracks and 62 vias.
It is built around the TC74ACT574FTEL, HIF3FC-16PA-2.54DSA(71) and 220UF 10V 5*7, with the MJ-179PH, S4B-XH-A and S8B-XH-A among its other parts. Its parts include 23 resistors, 10 ICs, 8 connectors, 7 capacitors and 1 diode.
Main components
6TC74ACT574FTEL
TSSOP-20-40℃~+85℃ 1 10.1ns@5V,50pF 160MHz 24mA 24mA 4.5V~5.5V 5pF 8 80uA D-Type Rising Edge TC74ACTSeries TSSOP-20 Flip Flops ROHSToshibaFlip FlopsHIF3FC-16PA-2.54DSA(71)
插件Wire To Board ConnectorHirose Electric220UF 10V 5*7
插件,5x7mm1000hrs@105℃ 10V 220uF 2mm 5mm 7mm 插件,5x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - LeadedMJ-179PH
插件插件 DC Power Connectors ROHSMulticompDC Power ConnectorsS4B-XH-A
弯插,P=2.5mm-、- 1x4P、1x2P 1、1 2.5mm、3.96mm 250V、250V 2、4 4P、2P 6.1mm、9.4mm 7.86mm、12.4mm 8.5mm、11.5mm Brass、Brass K Pin PA66、PA66 Right Angle、Through Hole Tin、Tin UL94V-0、UL94V-0 White、White XH、VH Push-Pull,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorS8B-XH-A
弯插,P=2.5mm-25℃~+85℃ 1 11.5mm 1x8P 2.5mm 22.4mm 250V 3A 6.1mm 8 8P Brass K-foot PA66 Right Angle Tin UL94V-0 White XH Push-Pull,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdkicad_share
kicad share data.
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 300 | A01myFootPrint:C_0805 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 6 | 0.1uF | A01myFootPrint:C_0805 | C1, C2, C3, C4, C5, C6 |
| 6 | 10K | A01myFootPrint:C_0805 | R18, R19, R20, R21, R22, R23 |
| 6 | TC74ACT574F | A01myFootPrint:ic_DIP-20_W7.62mm | IC1, IC2, IC3, IC4, IC9, IC10 |
| 4 | TD62083AP | A01myFootPrint:ic_DIP-18_W7.62mm | IC5, IC6, IC7, IC8 |
| 3 | HIF3FC-16PA-2.54DSA | A01myFootPrint:cn_HIF3FC-16PA-254DSA | CN1, CN2, CN4 |
| 1 | 220uF/10V | A01myFootPrint:CP_Radial_D8.25mm_P3.80mm | C7 |
| 1 | 470 | A01myFootPrint:C_0805 | R17 |
| 1 | FH-1x10RG | A01myFootPrint:cn_FH-1x10RG | CN6 |
| 1 | GREEN | A01myFootPrint:C_0805 | LED1 |
| 1 | MJ-179P | A01myFootPrint:MJ-179P | CN3 |
| 1 | PH-1X10RG(2) | A01myFootPrint:cn_PH-1X10RG_2 | CN7 |
| 1 | S4B-XH-A | A01myFootPrint:S4B-XH-A | CN8 |
| 1 | S8B-XH-A | A01myFootPrint:cn_S8B-XH-A | CN5 |
The 49 most common of 53 parts.
More from hamayanShowa-ele/kicad_share
12- 4 layers102 × 86 mm

- 2 layers166 × 180 mm

- 2 layers195 × 70 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers195 × 70 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 148.7 mm

- 2 layers76 × 92 mm

- 2 layers80 × 91 mm

- 2 layers100 × 50 mm

Similar boards
- 4 layers100 × 100 mm

- 4 layers195 × 45 mm

- 2 layers

- 2 layers36 × 48 mm

- 2 layers100 × 100 mm

LEOS flight computer
VIP-LES/flight-computer-pcb
The flight computer PCB stack design. Started Fall '25
38 parts - 2 layers100 × 100 mm

- 2 layers109.9 × 62 mm

- 8 layers100.2 × 55 mm

Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0
Questions
How big is the MatrixLEDcontrol PCB?
It measures 76 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MatrixLEDcontrol use?
53 parts, built around the TC74ACT574FTEL, HIF3FC-16PA-2.54DSA(71), 220UF 10V 5*7 and MJ-179PH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MatrixLEDcontrol KiCad files?
From the hamayanShowa-ele/kicad_share repository on GitHub, at the commit this page was made from: the board is projects/matrixLEDcontrol/matrixLEDcontrol.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MatrixLEDcontrol design in my own project?
Its repository states no licence, so its author keeps all rights: ask hamayanShowa-ele before reusing the design.