

SmartTBBatteryChargerNewTest
- Size
- 80 × 99 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 260
- Nets
- 184
- Pads
- 825
- Tracks, vias
- 1,223, 2,239
- Pours
- 73
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Sep 2024
- Updated
- 25 Jun 2025
Overview
SmartTBBatteryChargerNewTest is an open-source printed circuit board by X-Green, from the X-Green/SmartTBBatteryCharger repository on GitHub. It is a 4-layer board of 80 × 99 mm with 260 parts on 184 nets, routed with 1,223 tracks and 2,239 vias.
It is built around the FD6288Q, RY8411 and BSC070N10NS5, with the K34, SB2045L and WS2812B among its other parts. Its parts include 110 capacitors, 63 resistors, 30 diodes, 12 ICs and 8 connectors. It belongs with the STM32 boards of this library.
Main components
10FD6288Q
QFN-24-EP(4x4)-40℃~+125℃ 1.5A 1.8A 100ns 12ns 12ns 2.7V 3 300ns 330uA 5V~20V 800mV IGBT、MOSFET Three Phase Under Voltage Protection QFN-24-EP(4x4) Gate Drivers ROHSFortior TechGate DriversRY8411
SOT-23-6-40℃~+85℃@(TA) 1 1.2A 400uA 4V~38V 800kHz Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHSRYCHIP Semiconductor Inc.DC-DC ConvertersBSC070N10NS5
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100V 2.7nF 28pF 3.8V 38nC@10V 7mΩ@10V 80A 83W TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsK34
SOD-123FL-65℃~+150℃ 100uA 3A 40V 550mV@3A 80A Independent SOD-123FL Schottky Diodes ROHSGOODWORKSchottky DiodesSB2045L
TO-2771 Independent 200A 200uA@45V 20A 480mV@15A 50V TO-277 Schottky Diodes ROHSWild GooseSchottky DiodesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSMF10A
SOD-123FL-55℃~+150℃ 1 10V 11.8A@10/1000us 12.3V 17V 2.5uA 200W@10/1000us TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSTWGMCESD And Surge Protection (TVS/ESD)SMF3.3A
SOD-123FL200W@10/1000us 25A 3.3V 5.2V 500uA 8V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSDOWOESD And Surge Protection (TVS/ESD)
Parts
260| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 100n | Capacitor_SMD:C_0603_1608Metric | C11, C23, C24, C25, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111 +36 |
| 32 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C2, C16, C17, C18, C19, C22, C33, C45, C46, C48, C49, C59, C61, C63, C64 +16 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R4, R12, R14, R16, R22, R24, R27, R30, R32, R39, R47, R48, R49, R54, R56 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R18, R29, R34, R38, R44, R45, R46 |
| 8 | 33 | Resistor_SMD:R_0603_1608Metric | R13, R17, R26, R31, R53, R55, R57, R64 |
| 8 | LED_BLUE | LED_SMD:LED_0603_1608Metric | D23, D24, D25, D26, D27, D28, D32, D33 |
| 7 | 10n | Capacitor_SMD:C_0603_1608Metric | C10, C60, C62, C68, C87, C88, C89 |
| 7 | 2.2k | Resistor_SMD:R_0603_1608Metric | R58, R59, R60, R61, R62, R63, R65 |
| 7 | 90k | Resistor_SMD:R_0603_1608Metric | R15, R23, R25, R40, R50, R51, R52 |
| 6 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C40, C41, C42, C72, C73, C74 |
| 6 | 10m | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm | R5, R6, R8, R9, R10, R11 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C12, C29, C54, C55, C57, C90 |
| 6 | 3.3 | Resistor_SMD:R_0603_1608Metric | R28, R33, R35, R41, R42, R43 |
| 6 | 47u | Inductor_SMD:L_Coilcraft_MSS1260-XXX | L4, L5, L6, L7, L8, L9 |
| 6 | 5A | Fuse:Fuse_1206_3216Metric | F3, F4, F5, F6, F9, F10 |
| 6 | BSC070N10NS5 | Package_TO_SOT_SMD:TDSON-8-1 | Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U5, U7, U8, U9, U10, U11 |
| 6 | K34 | Diode_SMD:D_SOD-123F | D10, D18, D19, D20, D21, D22 |
| 6 | SB2045L | Diode_SMD:D_PowerDI-5 | D3, D11, D12, D13, D14, D16 |
| 6 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4, D5, D6, D29, D30, D31 |
| 6 | XT60_MALE | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J3, J4, J5, J6, J9, J10 |
| 3 | 100p | Capacitor_SMD:C_0603_1608Metric | C14, C15, C56 |
| 3 | MountingHole_Pad_MP | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3 |
| 2 | 120r | Resistor_SMD:R_0603_1608Metric | R36, R37 |
| 2 | 4.7u | Inductor_SMD:L_Bourns-SRN4018 | L1, L2 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C20, C21 |
| 2 | FD6288Q | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U6, U12 |
| 2 | RY8411 | Package_TO_SOT_SMD:SOT-23-6 | U1, U3 |
| 2 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R66 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 118k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric | F7 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D9 |
| 1 | 220 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 30A | Fuse:Fuse_1206_3216Metric | F8 |
| 1 | 54.7k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Buzzer-9032 | LinkedLibrary:MLT-9032 | BZ1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J8 |
| 1 | Conn_SWD | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J7 |
| 1 | RS3236 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SMF10A | Diode_SMD:D_SMF | D1 |
| 1 | SMF3.3A | Diode_SMD:D_SMF | D15 |
| 1 | SMF5V0A | Diode_SMD:D_SMF | D2 |
| 1 | STM32G474RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
More from X-Green/SmartTBBatteryCharger
2- 2 layers100 × 100 mm

- 4 layers69.2 × 49.9 mm

Similar boards
- 4 layers40.5 × 59.5 mm
/NEWSuperCapacitorController-master/hardware/SuperCap2024_Control_V1.1R_F3_ISOPWR/SuperCap2024Control_V1.1R_F3_ISOPWR.kicad_pcb.jpg?size=s&soon)
- 4 layers45.9 × 42.1 mm

- 4 layers80 × 50 mm

MianCtrl H7
Aiyin4Da-2/Main_Ctrl_H7
STM32H723VGT6 MainCtrlBoard Author: Aiyin4DaGLD · Hardware: v1.2 · Updated: 2026-08-21
153 partsMIT - 4 layers100 × 100 mm

- 4 layers80 × 80 mm

- 4 layers63.7 × 64 mm

WirelessCharger V0.1
htsong-lab/hardware
Hardware engineering portfolio: FPGA high-speed board, RoboMaster power electronics and smart-car projects.
196 parts - 4 layers60 × 52 mm

Dual Head Motor Driver
baoqi-zhong/Awesome-SMT-Machine
A single head 🔥SMT Machine🔥 based on FOC stepper motors. Pure self-developed and fully open-sourced.
98 parts9 - 2 layers45 × 22 mm

Questions
How big is the SmartTBBatteryChargerNewTest PCB?
It measures 80 × 99 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SmartTBBatteryChargerNewTest use?
260 parts, built around the FD6288Q, RY8411, BSC070N10NS5 and K34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartTBBatteryChargerNewTest KiCad files?
From the X-Green/SmartTBBatteryCharger repository on GitHub, at the commit this page was made from: the board is hardware_test_new_2/SmartTBBatteryChargerNewTest.kicad_pcb and its schematic hardware/SmartTBBatteryCharger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartTBBatteryChargerNewTest design in my own project?
Its repository states no licence, so its author keeps all rights: ask X-Green before reusing the design.