Skip to the content
12

SMF3.3A

DOWOExtended

200W@10/1000us 25A 3.3V 5.2V 500uA 8V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHS

Part id
dowo/SMF3.3A
Category
ESD And Surge Protection (TVS, ESD)
Package
SOD-123FL
Pins
2
In stock
235,033 at JLCPCB (C283866)
Used on
7 open-source boards

Overview

The SMF3.3A is an ESD And Surge Protection made by DOWO in a SOD-123FL package with 2 pins. 200W@10/1000us 25A 3.3V 5.2V 500uA 8V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 235,033 are in stock at JLCPCB (part C283866). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123FFrom KiCad's library

Pinout

2
The pins of the SMF3.3A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

7
  • 4 layers70 × 50 mmFinalized bluetooth remote, the printed circuit board in 3D

    Finalized bluetooth remote

    3pnguyen/esp32-bluetooth-media-keyboard

    Electronic project that provides the same control as wireless earbuds.

    62 partsMIT
  • 4 layers68 × 29.3 mmSFP xSPI Bridge, the printed circuit board in 3D

    SFP xSPI Bridge

    bartkepl/SFP-xSPI_Bridge

    Mostek OCTOSPI/QUADSPI/SPI <-> SFP na FPGA Gowin GW1N-9: lacze swiatlowodowe 100 Mbaud 8b/10b z programowym odzyskiem zegara, biblioteka C dla STM32

    53 partsMIT
  • 2 layers61 × 61.2 mmScooter board, the printed circuit board in 3D

    Scooter board

    d0ng3o/esp32_turd_scooter_controller

    Open-source ESP32-C3 replacement control board + ESP-IDF firmware for a decommissioned Bird One e-scooter, plus the reverse-engineered Lishui one-wire bus protocol.

    39 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMF3.3A?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMF3.3A?

SOD-123FL, with 2 pins. Its footprint is drawn on this page.

Where is the SMF3.3A datasheet?

DOWO publishes it: the Datasheet link on this page opens it.

Where can I order the SMF3.3A?

JLCPCB lists it as part C283866, with 235,033 in stock; the sellers' links on this page open their listings.

What can replace the SMF3.3A?

Parts like it in the library: the SMF3.3CA by hongjiacheng, the SMF3.3CA by DOWO, the SMF3.3CA by FUXINSEMI and the SMF3.3A by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMF3.3A?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.