Skip to the content

Boards using the DMN2056U-7

15 boards

Boards in 11 GitHub repositories, designed in KiCad, that use the DMN2056U-7 by Diodes Incorporated (-55℃~+150℃ 1 N-channel 1V 20V 339pF 34pF 4.3nC@4.5V 45mΩ@2.5V 47pF 4A 940mW N-Channel SOT-23 MOSFETs ROHS). See how each wires it, with its parts, size, README and files; the DMN2056U-7’s symbol, footprint and pinout are on its own page.

  • 4 layers46.4 × 99.8 mmTrimix Analyzer, the printed circuit board in 3D

    Trimix Analyzer

    magnus188/aegir

    Open-source ESP32-P4 trimix analyzer prototype for technical diving,

    171 parts14
  • 4 layers160 × 100.1 mmPMT counter 4 layers, the printed circuit board in 3D

    PMT counter 4 layers

    mmazzanti/PMT-counter

    A PCB board for counting pulses up to 1.5GHz from a PMT (or similar)

    126 parts3GPL-3.0
  • 4 layers165 × 100 mmUsb scoring platform, the printed circuit board in 3D

    Usb scoring platform

    AndrewCraswell/agency

    Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.

    224 partsMIT
  • 4 layers40.6 × 49.3 mmLedkiv3 1, the printed circuit board in 3D

    Ledkiv3 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    164 parts
  • 4 layers35 × 42.5 mmBluetooth Channel Sounding Tag, the printed circuit board in 3D

    Bluetooth Channel Sounding Tag

    JaphD/Phasetag

    Compact nRF54L15 Bluetooth Channel Sounding tag with dual PCB antennas, motion sensing, and rechargeable power management. Designed in KiCad 10.

    71 parts
  • 4 layers70 × 65 mmESP32 FC, the printed circuit board in 3D

    ESP32 FC

    JS2028EE/ESP32_FC

    This is the current editable KiCad 10 project for a 70 x 65 mm, four-layer controller, with an ESP32-S3-WROOM-1-N8R8, BMI088 SPI IMU, BMP280 barometer and a separate 4-in-1 ESC.

    107 parts
  • 2 layers123 × 116.3 mmControl Box, the printed circuit board in 3D

    Control Box

    pauladam316/observatory_pcbs

    158 parts
  • 2 layers90 × 60 mmFlappy esp32c3-revb, the printed circuit board in 3D

    Flappy esp32c3-revb

    Soulboy420/BP_flappyBird

    Eigenständiger KiCad-10-Entwurf für das HAW-Bachelorprojekt. Der ursprüngliche Entwurf unter hardware/ und absichtliche Benutzerlöschungen wurden nicht überschrieben. Es wurde nichts bestellt, committed oder gepusht.

    111 parts
  • 4 layers64 × 44 mmInput protection, the printed circuit board in 3D

    Input protection

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    52 parts1
  • 4 layers165 × 100 mmStandalone scoring box, the printed circuit board in 3D

    Standalone scoring box

    AndrewCraswell/agency

    Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.

    206 partsMIT
  • 2 layers150 × 110 mmRF80 V1, the printed circuit board in 3D

    RF80 V1

    DD1SB/ARDF-TX

    Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

    217 partsMIT
  • 4 layers42 × 40 mmClick counter Q2, the printed circuit board in 3D

    Click counter Q2

    dudgeon/count-fidget

    A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.

    62 parts
  • 2 layers42 × 40 mmClick counter Q3, the printed circuit board in 3D

    Click counter Q3

    dudgeon/count-fidget

    A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.

    82 parts
  • 4 layers40.6 × 49.3 mmLedkiv3 1, the printed circuit board in 3D

    Ledkiv3 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    154 parts
  • 4 layers49.6 × 49.6 mmLedkiv3 2, the printed circuit board in 3D

    Ledkiv3 2

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    159 parts