

Control Box
- Size
- 123 × 116.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 119
- Pads
- 390
- Tracks, vias
- 1,028, 427
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Feb 2024
- Updated
- 27 May 2024
Overview
Control Box is an open-source printed circuit board by pauladam316, from the pauladam316/observatory_pcbs repository on GitHub. It is a 2-layer board of 123 × 116.3 mm with 158 parts on 119 nets, routed with 1,028 tracks and 427 vias.
It is built around the ARDUINO UNO R3, INA181A1IDBVR(LX) and SN74LVC1G32DCKR(AT), with the MMBT3904, 1N4148W-TP and AHQSH105LM100G among its other parts. Its parts include 47 resistors, 32 diodes, 14 transistors, 8 switches and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedINA181A1IDBVR(LX)
SOT-23-6-200mV~30V -40℃~+125℃ 0.2uV/℃ 1 100dB 175uA 2.7V~5.5V 20V/V 25uV 2V/us 350kHz 6uA Bidirectional detection、Zero drift / auto-zero ±30V SOT-23-6 Current Sense Amplifiers ROHSlingxingicCurrent Sense AmplifiersSN74LVC1G32DCKR(AT)
SC-70-5-40℃~+125℃ 1 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 1.7V、2.2V 2 2.7ns@5V,50pF 300mV、400mV 300mV、400mV、450mV、550mV 74LVC OR Gate SC-70-5 Logic Gates ROHSAOTELogic GatesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)1N4148W-TP
SOD-123-65℃~+150℃@(Tj) 1.25V@150mA 100V 150mA 1uA@75V 2A 400mW 4ns SOD-123 Switching Diodes ROHSMicro Commercial ComponentsSwitching DiodesAHQSH105LM100G
插件-40℃~+105℃ 1 Set Normally Open: 1A (SPST NO) 10ms 16A 24V@DC、277V@AC 5V 5ms Silver Alloy 插件 Power Relays ROHSAmphenolPower RelaysDMG2305UX-13
SOT-23-55℃~+150℃ 1 P-Channel 1.4W 10.2nC@4.5V 20V 40mΩ@4.5V、52mΩ@2.5V 5A 77pF 808pF 85pF 900mV P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsDMN2056U-7
SOT-23-55℃~+150℃ 1 N-channel 1V 20V 339pF 34pF 4.3nC@4.5V 45mΩ@2.5V 47pF 4A 940mW N-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsSI3443CDV-T1-GE3
TSOP-6-55℃~+150℃ 1 P-Channel 1.5V 100mΩ@2.5V 105pF 11.3nC@4.5V 132pF 20V 3.2W 5.97A 610pF P-Channel ±12V TSOP-6 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20 +4 |
| 20 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP16, TP17, TP18, TP23, TP24, TP25 +4 |
| 12 | LG R971-KN-1 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D11, D12, D15, D16, D19, D20, D27, D28, D39, D40 |
| 11 | 140R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R11, R13, R15, R17, R19, R21, R40, R53, R54 |
| 10 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q18 |
| 8 | 125R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R41, R42 |
| 8 | 1N4148W-TP | Diode_SMD:D_SOD-123 | D3, D4, D13, D14, D17, D18, D21, D22 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R28, R43, R44, R45, R46, R50, R51 |
| 8 | 500R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R12, R14, R16, R18, R20, R22 |
| 8 | AHQSH105LM100G | AHQSH105LM100G:AHQSH105LM100G | K1, K2, K3, K4, K5, K6, K7, K8 |
| 8 | SMP5.0A-M3/84A | SMP3V3-M3_84A:DO-220AA | D5, D6, D7, D8, D9, D10, D41, D42 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R25, R47, R48 |
| 4 | DMG2305UX-13 | DMG2305UX-13:SOT96P240X120-3N | D23, D24, D25, D26 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R30 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R52 |
| 2 | DMN2056U-7 | DMN2056U-7:SOT96P240X100-3N | Q10, Q17 |
| 2 | SI3443CDV-T1-GE3 | SI3443CDV-T1-GE3:SOP95P284X110-6N | Q11, Q12 |
| 2 | SN74LVC1G32DCKR | SN74LVC1G32DCKR:SOT65P210X110-5N | IC1, IC2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1, J7 |
| 2 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J4, J6 |
| 2 | Screw_Terminal_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal | J2, J3 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 3568 | 3568:3568 | F1 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31 |
| 1 | 42m | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49 |
| 1 | 4527 | 4527:4527 | U1 |
| 1 | 490R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | INA181A1IDBVR | INA181A1IDBVR:SOT95P280X145-6N | U3 |
More from pauladam316/observatory_pcbs
2- 2 layers139 × 74 mm

- 2 layers9 × 60.7 mm

Similar boards
- 2 layers55 × 45 mm

- 2 layers89 × 56 mm

- 4 layers160 × 100.1 mm

PMT counter 4 layers
mmazzanti/PMT-counter
A PCB board for counting pulses up to 1.5GHz from a PMT (or similar)
126 parts3GPL-3.0 - 2 layers60 × 60 mm

- 4 layers174 × 104 mm

- 4 layers62 × 22.2 mm

UPduino v3.0
tinyvision-ai-inc/UPduino-v3.0
UPduino 3.0: new 4 layer layout, various other improvements
116 parts365MIT - 4 layers300 × 120 mm

Iv pulse mux
Brunner-neutrino-lab/ets-breakout
This repository contains the complete design files for a 96-channel I-V curve pulse multiplexer used in detector physics instrumentation.
445 parts - 2 layers58 × 68.5 mm

FS1--ATmega32U4
libertathiest/fs10-atmega32u4-monitor
A standalone USB monitor and configuration tool for the FCI FS10 Flow Switch, built around the ATmega32U4 on an Arduino Leonardo–compatible board.
73 parts
Questions
How big is the Control Box PCB?
It measures 123 × 116.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control Box use?
158 parts, built around the ARDUINO UNO R3, INA181A1IDBVR(LX), SN74LVC1G32DCKR(AT) and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control Box KiCad files?
From the pauladam316/observatory_pcbs repository on GitHub, at the commit this page was made from: the board is Control Box/Control Box.kicad_pcb and its schematic Control Box/Control Box.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control Box design in my own project?
Its repository states no licence, so its author keeps all rights: ask pauladam316 before reusing the design.