Skip to the content
2 layers90 × 60 mmFlappy esp32c3-revb, the printed circuit board in 3D

Flappy esp32c3-revb

Soulboy420/BP_flappyBird

Eigenständiger KiCad-10-Entwurf für das HAW-Bachelorprojekt. Der ursprüngliche Entwurf unter hardware/ und absichtliche Benutzerlöschungen wurden nicht überschrieben. Es wurde nichts bestellt, committed oder gepusht.

Size
90 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
111
Nets
63
Pads
322
Tracks, vias
2,109, 366
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Aug 2026
Updated
9 Oct 2026

Overview

Flappy esp32c3-revb is an open-source printed circuit board by Soulboy420, from the Soulboy420/BP_flappyBird repository on GitHub. It is a 2-layer board of 90 × 60 mm with 111 parts on 63 nets, routed with 2,109 tracks and 366 vias.

It is built around the ESP32-C3-WROOM-02-N4, BQ24074RGTR and XC6220B331PR-G, with the TPD2E2U06DCKR-TP, 2N7002-7-F-ES and 0466001.NRHF among its other parts. Its parts include 39 resistors, 19 capacitors, 12 diodes, 7 transistors and 6 connectors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

12

README

hardware/redesign/README.md

Flappy Bird – Elektronik Revision B

Eigenständiger KiCad-10-Entwurf für das HAW-Bachelorprojekt. Der ursprüngliche Entwurf unter hardware/ und absichtliche Benutzerlöschungen wurden nicht überschrieben. Es wurde nichts bestellt, committed oder gepusht.

Status: NO-GO für eine Bestellfreigabe als fertiges Akkugerät. Die digitalen Prüfungen bestehen; OLED-/Akku-Schnittstellen, Temperaturfreigabe, Gehäuse und Fertigeraufbau sind noch offen. R39 ist DNP und sperrt das Laden in der Standardbestückung. Die vollständigen Freigabebedingungen stehen in doc/freigabe-checkliste.md.

Projekt öffnen

flappy-esp32c3-revb.kicad_pro mit KiCad 10.0.5 oder neuer öffnen. Hauptschaltplan und sechs hierarchische Funktionsblätter liegen daneben. Symbole, Footprints und 3D-Modelle sind unter lib/ lokal eingebunden. Maßgeblich sind die gespeicherten nativen CAD-Dateien, nicht ein Generatorlauf. Das bestehende Firmwareprojekt wurde nicht auf die neue Pinbelegung umgestellt.

Das Layout ist 90×60 mm, zweilagig und 1,6 mm dick. Die ESP-Antenne ragt über die Oberkante. Überwiegend 0805/1206 und THT, mit begründeter lokaler Reflow-Ausnahme für den BQ24074 und anspruchsvoller USB-Buchsenbestückung.

Inhalt

Datei/OrdnerZweck
doc/audit.mdNachvollziehbare Fehler und Widersprüche im Ausgangsentwurf
doc/designentscheidungen.mdTatsächliche Schaltung, Berechnungen, GPIOs, Betriebssequenzen, Ruhestrom und Grenzen
doc/quellen.mdOriginaldatenblätter, Revisionen und Symbol-/Footprint-Pinprüfung
doc/offene-annahmen.mdUnbekannte reale Teile und DNP-Varianten
doc/freigabe-checkliste.mdMessungen vor Bestellung und gestufte Inbetriebnahme
output/schaltplan.pdfAktueller siebenseitiger Schaltplan, A3
output/pcb-oberseite.pdf, pcb-unterseite.pdfKupfer/Bestückungsdruck, Unterseite gespiegelt, Maßstab 2,5:1
output/bestueckungsplan.pdfKontrastreicher Plan mit Padnummern und DNP-Kreuzen, 2,5:1
output/stueckliste.csvVollständige BOM mit Hersteller/MPN/Gehäuse/DNP
output/pinmapping.csvJede tatsächliche Pad-Netz-Zuordnung
output/bestueckungspositionen.csv85 zu bestückende Teile, Millimeter; DNP ausgeschlossen
output/fertigung/Gerber X2, getrennte PTH-/NPTH-Bohrdaten und Bohrübersichten; noch keine Bestellfreigabe
output/platine-3d.png, platine.stepAnsicht und CAD-Geometrie zur Prüfung; U2/U3 haben vereinfachte Modelle
verification/final-erc.*, final-drc.*Echte KiCad-Endberichte
verification/consistency.json, pruefbericht.mdUnabhängiger Datenabgleich und Prüfgrenzen
verification/SHA256SUMSDateihashes des Abgabestands

Ergebnis der digitalen Prüfung

KiCad 10.0.5: ERC 0 Fehler/0 Warnungen; DRC 0 Fehler/0 Warnungen, 0 offene Verbindungen, 0 Schaltplan-Abweichungen. Keine individuellen DRC-Ausnahmen. Abgleich aller 111 Referenzen und 58 Funktionsnetze bestanden; 85 bestückt, 26 DNP (darunter physische Testpads/Bohrungen). Detaillierte aktivierte bzw. standardmäßig nicht ausgeführte Prüfarten sind im Prüfbericht offengelegt.

Weiterbearbeitung

Die Routingskripte unter tools/ dokumentieren die Entwicklung und sind keine idempotente Ein-Kommando-Neuerzeugung des fertigen Boards. build.py --update-board setzt u.a. Bibliotheken und Beschriftungspositionen zurück. Nicht auf dem geprüften Endstand ausführen. Direkte KiCad-Bearbeitung ist der bevorzugte Weg; danach native ERC/DRC mit Neufüllung, XML-Netzexport, verify_consistency.py und sämtliche Ausgaben/Hashes neu erzeugen. export_release.py erzeugt nur die Abgabedateien aus bereits geprüften CAD-Dateien und prüft, dass der PCB-Inhalt beim Export unverändert bleibt. Die Skripte enthalten die hier verwendeten lokalen KiCad-Pfade und müssen auf einem anderen Rechner angepasst werden.

Die Schaltplanblätter verwenden globale Netzlabels und sind nach Funktionen gegliedert. Gleichnamige Labels sind elektrisch verbunden. Eine drahtlose Darstellung im Plan bedeutet keine fehlende Leiterbahn; die tatsächlichen Verbindungen stehen in der nativen Netzliste und wurden gegen das PCB geprüft.

Parts

111
QtyValueFootprintReferences
922u 16V X5RRevB:Capacitor_SMD__C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC3, C4, C5, C6, C7, C8, C9, C10, C11
8100kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R10, R21, R22, R28, R33, R35, R38
8TPD2E2U06DCKRRevB:Package_TO_SOT_SMD__SOT-323_SC-70D2, D3, D4, D5, D6, D7, D8, D9
610kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R16, R17, R18, R19, R27
5100n 50V X7RRevB:Capacitor_SMD__C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C12, C15, C16, C19
41MRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R13, R30, R31
4220RevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR23, R24, R25, R26
4M2RevB:MountingHole__MountingHole_2.2mm_M2H1, H2, H3, H4
3100RevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11, R29, R36
31u 25V X7RRevB:Capacitor_SMD__C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C13, C14
32N7002-7-FRevB:Package_TO_SOT_SMD__SOT-23Q3, Q5, Q7
3GNDRevB:TestPoint__TestPoint_Pad_D1.5mmTP6, TP13, TP14
20RevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14, R39
218p 50V C0GRevB:Capacitor_SMD__C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18
21A fastRevB:Fuse__Fuse_1206_3216MetricF1, F2
21kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR34, R37
222RevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4
23.3kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R20
25.1kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2BSS84-7-FRevB:Package_TO_SOT_SMD__SOT-23Q2, Q4
13.24kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
1330kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR32
13V3RevB:TestPoint__TestPoint_Pad_D1.5mmTP5
13V3_REGRevB:TestPoint__TestPoint_Pad_D1.5mmTP4
146.4kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
16.19kRevB:Resistor_SMD__R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7
174LVC125AD,118RevB:Package_SO__SOIC-14_3.9x8.7mm_P1.27mmU5
1BAT 1S protectedRevB:Connector_JST__JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ2
1BAT_ADCRevB:TestPoint__TestPoint_Pad_D1.5mmTP9
1BAV19W-7-FRevB:Diode_SMD__D_SOD-123D12
1BOOT_NRevB:TestPoint__TestPoint_Pad_D1.5mmTP8
1BQ24074RGTRRevB:Package_DFN_QFN__VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mmU2
1BUTTONRevB:TestPoint__TestPoint_Pad_D1.5mmTP15
1BUTTON dry contactRevB:Connector_JST__JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1CHARGE redRevB:LED_SMD__LED_0805_2012MetricD10
1CHG_DISABLERevB:TestPoint__TestPoint_Pad_D1.5mmTP11
1DMN2056U-7RevB:Package_TO_SOT_SMD__SOT-23Q6
1DMP2035U-7RevB:Package_TO_SOT_SMD__SOT-23Q1
1ESP32-C3-WROOM-02-N4RevB:RF_Module__ESP32-C3-WROOM-02U1
1ISETRevB:TestPoint__TestPoint_Pad_D1.5mmTP16
1NTCRevB:TestPoint__TestPoint_Pad_D1.5mmTP12
1OLED 8 pinRevB:Connector_JST__JST_XH_B8B-XH-A_1x08_P2.50mm_VerticalJ3
1PACK NTC 10kRevB:Connector_JST__JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1PASSIVE PIEZORevB:Connector_JST__JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
1RESET_NRevB:TestPoint__TestPoint_Pad_D1.5mmTP7
1RUN / OFFRevB:Button_Switch_THT__SW_Slide_SPDT_Straight_CK_OS102011MS2QSW1
1RUN green active lowRevB:LED_SMD__LED_0805_2012MetricD11
1SMBJ6.0ARevB:Diode_SMD__D_SMBD1
1TPS22919DCKRRevB:Package_TO_SOT_SMD__SOT-363_SC-70-6U4
1USB4105-GF-ARevB:Connector_USB__USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1USB_GOOD_NRevB:TestPoint__TestPoint_Pad_D1.5mmTP10
1VBATRevB:TestPoint__TestPoint_Pad_D1.5mmTP2
1VBUSRevB:TestPoint__TestPoint_Pad_D1.5mmTP1
1VSYSRevB:TestPoint__TestPoint_Pad_D1.5mmTP3
1XC6220B331PR-GRevB:Package_TO_SOT_SMD__SOT-89-5U3

More from Soulboy420/BP_flappyBird

1
  • 2 layers90 × 60 mmFlappy esp32c3, the printed circuit board in 3D

    Flappy esp32c3

    Soulboy420/BP_flappyBird

    Eigenständiger KiCad-10-Entwurf für das HAW-Bachelorprojekt. Der ursprüngliche Entwurf unter hardware/ und absichtliche Benutzerlöschungen wurden nicht überschrieben. Es wurde nichts bestellt, committed oder gepusht.

    64 parts

Similar boards

  • 2 layers53.3 × 47.2 mmRAMPS WiFi Adapter, the printed circuit board in 3D

    RAMPS WiFi Adapter

    ODDepot/RAMPS-WiFi-Adapter

    The RAMPS WiFi Adapter provides wireless networking for RepRap's RAMPS (Arduino Mega Pololu Shield) controller.

    21 parts10
  • 2 layers42 × 40 mmClick counter Q3, the printed circuit board in 3D

    Click counter Q3

    dudgeon/count-fidget

    A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.

    82 parts
  • 2 layers160 × 100 mmBase, the printed circuit board in 3D

    Base

    florolf/lab-automation

    Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.

    83 parts1
  • 4 layers46.4 × 99.8 mmTrimix Analyzer, the printed circuit board in 3D

    Trimix Analyzer

    magnus188/aegir

    Open-source ESP32-P4 trimix analyzer prototype for technical diving,

    171 parts14
  • 4 layers65 × 100 mmPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    188 parts2MIT
  • 2 layers83.5 × 93.3 mmLine follower, the printed circuit board in 3D

    Line follower

    bluecube/line_follower

    Simple line follower robot

    48 parts3Unlicense
  • 4 layers80 × 72 mmPH ORP Card, the printed circuit board in 3D

    PH ORP Card

    brandtks/AquaPicModules

    AquaPic modules, board design and firmware

    118 parts2
  • 4 layers100 × 62.5 mmOmniframe Hardware, the printed circuit board in 3D

    Omniframe Hardware

    omniframe-art/Omniframe-Hardware

    Omniframe is an open source e-paper digital frame. This repository includes the source and fabrication files for the main and secondary boards for driving the 13.3" Monochrome e-ink display.

    104 parts4

Questions

How big is the Flappy esp32c3-revb PCB?

It measures 90 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flappy esp32c3-revb use?

111 parts, built around the ESP32-C3-WROOM-02-N4, BQ24074RGTR, XC6220B331PR-G and TPD2E2U06DCKR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flappy esp32c3-revb KiCad files?

From the Soulboy420/BP_flappyBird repository on GitHub, at the commit this page was made from: the board is hardware/redesign/flappy-esp32c3-revb.kicad_pcb and its schematic hardware/_restore_backup_2026-08-25T08-33-44-858/flappy-esp32c3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flappy esp32c3-revb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Soulboy420 before reusing the design.