Boards using the BC327

95 boards

Boards in 80 GitHub repositories, designed in KiCad, that use the BC327 by DDF (1 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the BC327’s symbol, footprint and pinout are on its own page.

2 layers82.4 × 43.1 mm
27C160 Adapter
mafe72/27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the TL866 universal programmer.
12 parts149GPL-3.0
2 layers101.6 × 96.5 mm
27C160 Adapter panel
gaggi/27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the popular TL866 universal programmer
20 parts46GPL-3.0
2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36
2 layers83.8 × 72.4 mm
Voice board
Windfisch/analog-synth
A low-cost semimodular analog synthesizer
131 parts31GPL-3.0
2 layers224.2 × 153.7 mm
Stand
radiolok/dekatronpc
DekatronPC - vacuum tube and cold-cathode tube based computer
196 parts17
2 layers299.2 × 180 mm
2layer
ceteras/CoBra
A Z80 retro computer, ZX Spectrum compatible, can also run CP/M.
369 parts11MIT
2 layers213.6 × 127.5 mm
Zuendbox v3 32
fixxl/el-fueradoro
Open source ignition-system for audio-fireworks
205 parts10
2 layers25.4 × 35.6 mm
Audio adapter
number42net/sharp-pc1251
The Sharp PC-1251 / TRS-80 PC1 audio connector lets you load and safe programs directly to a computer or phone.
6 parts9
2 layers56 × 102.5 mm
Engineers thumb
artaommahe/littletruck_pcb
PCB's of guitar pedals
46 parts5
2 layers
Raposfly UPS
LenaicElsig/ups-RaspberryPi
Uninterrupted power supply for Raspberry Pi
45 parts4
2 layers82.4 × 43.1 mm
27C160 Adapter
silvervest/TL866-27Cxxx-adapter
This adapter converts the pin-outs of the parts listed below (which is similar to contemporary DIP-packaged mask ROMs) to 27C4096 pin-out as supported by the readily-available and cheap TL866 series of USB programmers.
12 parts4GPL-3.0
2 layers77.5 × 57.1 mm
Rx new full
rf-designers/transceiver
Repository containing the design for the YO6SSW SDR transceiver, version 2
197 parts2MIT
2 layers73 × 112 mm
DymBOX AVR
2pkstartup/DymBOX
Regulátor teploty pro udírnu postavený na mikrokontroléru ATmega8.
50 parts1
4 layers138.4 × 80.3 mm
IOlinesManagement
catinella/HILO
Hardware In the LOop
156 parts1
2 layers120.1 × 120 mm
Mono amplifier
dario0603/AB-class-amplifier
Design and simulation of a Class-AB audio power amplifier, focusing on output-stage linearity, crossover distortion reduction, and overcurrent protection.
97 parts1
2 layers80 × 100 mm
Simple 8-bit HD IF for Spectrum +3 v1.0
lostretrotapes/Simple-8-Bit-IDE-Interface-for-Spectrum-3e

11 parts1
2 layers84.3 × 56.6 mm
HDC
spodula/Spec-IDE-Interface
Buffered and Unbuffered 8 bit IDE interfaces for the zx Spectrum.
19 parts1
2 layers310 × 260 mm
Weisse cpu
stonedDiscord/weisse_cpu
Die Weiße CPU
480 parts1
2 layers
ZxIDE
TurBoss/ZxIDE
ZX Spectrum 128K 2+ IDE Adaptor
5 parts1
4 layers98.7 × 99.9 mm
Ntscv2
xp5-org/ntsc-framebuffer
ntsc sync with 74xx logic gates
225 parts1MIT
2 layers70.2 × 144.1 mm
DymBOX AVR
2pkstartup/dymbox_pcb

49 parts
2 layers42.4 × 31.2 mm
PCB Boards
Abhi-1725/PCB-Boards
Design and Soldering of PCB
38 parts
2 layers111.8 × 116.8 mm
4-in-1 LED Matrix Board
ansh7458/4-in-1-LED-Matrix-Board-main
A compact and multifunctional 5×7 LED dot matrix system built around an Arduino Nano. It integrates four interactive modules into a single educational platform:
46 parts
2 layers145 × 125 mm
Cabane minou
bpmine/minou_uino
Les programmes de cette base gèrent la cabane de notre minou (voir images suivantes).
137 parts