Boards using the TSL25911FN

39 boards

Boards in 32 GitHub repositories, designed in KiCad, that use the TSL25911FN by Advanced Monolithic Systems (-30℃~+70℃ 2.7V~3.6V I2C Light Intensity DFN-6(2x2.2) Ambient Light Sensors ROHS). See how each wires it, with its parts, size, README and files; the TSL25911FN’s symbol, footprint and pinout are on its own page.

2 layers52 × 56.6 mm
MuMo v2-Node
Strooom/MuMo-V2-Node-PCB
PCB design for the Museum Monitor V2
79 parts17
4 layers52.5 × 59.7 mm
ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0
2 layers40 × 22.1 mm
Kaze
Las-Vejas/Kaze
A very powerful surrounding sensor
44 parts3MIT
2 layers100 × 69 mm
Light intensity data logger
Llamero/Light_Color_and_Intensity_Datalogger
Measures temperature, pressure, humidity, intensity and color of light and saves it to an SD card
27 parts2Apache-2.0
2 layers51.7 × 80.7 mm
ESPHome MultiPresence
PennyLekas/ESPHome_MultiPresence
A ESPHome presence sensor with mmWave radar, PIR motion, light, temperature, humidity, and pressure
48 parts2GPL-3.0
2 layers10 × 10 mm
Tsl2591 smaller
lhr-solar/Array-BlackbodyC-PCB

3 parts1
2 layers30 × 45 mm
Automato V2.0
Automato-ag/Brain-Board
Firmware and documentation for the Automato Brain Board V2.0, an ESP32-C6 based agricultural IoT node with onboard temperature, humidity, and light sensing, ESP-NOW mesh networking, relay control, and a self-hosted web…
32 partsMIT
2 layers1.3 × 49 mm
Sunbie
avycado13/sunbie

24 parts
4 layers
NRF development board HAN V1.0
EmielV2002/nRF_dev_board
A dev board utilizing the nRF53 and nPM1100 chip.
105 partsGPL-3.0
2 layers240 × 240 mm
Qlock250mm
FranzKugler/QlockThreeW32
Word Clock with xiao Esp32S3+ and WS2812B LED strips
237 parts
2 layers25.4 × 50.8 mm
Compact sqm
JWehle/compact_sqm
A compact sky quality meter built on a custom PCB.
36 partsApache-2.0
4 layers113.1 × 105.6 mm
Cansat v1
NBER08/CanSat

89 parts
4 layers55.6 × 104.6 mm
Cansat v3
NBER08/CanSat-PCB
A custom made PCB board for a high school CanSat competition.
90 parts
2 layers87.5 × 77 mm
Project7
Sarav016/Smart-Environmental-Monitoring-PCB-using-ESP32

17 parts
2 layers52.8 × 71.8 mm
ESPBoosted
schoolllex/ESPBoosted
A custom, feature-rich ESP32-WROOM-32 development board featuring built-in environmental sensors, power management, and expansion interfaces.
51 parts
2 layers52 × 18 mm
LoRa V3-Mini PCB
Strooom/LoRa-V3-Mini-PCB
This is a stripped-down version of https://github.com/Strooom/LoRa-V3-PCB no rechargeable battery - only 14250 type Li batteries 3.0 up to 3.6V no e-paper display no USB for charging non-volatile memory 128KByte io up…
25 parts
2 layers10 × 10 mm
LoRa V3-Sensor PCB
Strooom/LoRa-V3-Sensor-PCB
KiCAD design files for the LoRa-V3-Sensor-PCB.
6 parts
4 layers120 × 76 mm
Panel
vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…
235 parts
2 layers80 × 80 mm
LEOS purpleboard
VIP-LES/leos-purpleboard-pcb
The Purpleboard holds four environmental and light sensors, powered at 3.3 V. The board has no microcontroller instead it connects to a host board through a JST XH cable, and a second JST XH connector passes the I2C bus…
10 parts
2 layers101.6 × 38.1 mm
Nes input
dkonigsberg/nestronic
Nestronic Game Music Synthesizer Alarm Clock
30 parts38
2 layers99.1 × 19 mm
Front panel
bfrigon/alarm-clock-v3
Alarm clock (v3)
34 parts18CC-BY-SA-4.0
2 layers99.1 × 88.9 mm
Panel
bfrigon/alarm-clock-v3
Alarm clock (v3)
122 parts18CC-BY-SA-4.0
2 layers10 × 10 mm
LightSensor
rivertechlabs/suspendedsedimentsensor
:ocean: 3D-printed, open-source suspended sediment sensor for river network monitoring (prototype 3.0)
3 parts12AGPL-3.0
2 layers20 × 18 mm
Lux module
jeevan9s/homectrl-sys
home automation controller
13 parts2